Open Mesh ATPoE User manual

ATPoE
Quick Start Guide
We help professionals create powerful, easy-to-use networks that automatically spread Internet
connections throughout hotels, apartments, retail stores, restaurants, small and medium-sized
businesses—and just about anywhere else.
openmesh.com
© 2016 Open Mesh, Inc. All Rights Reserved.

PoE injector overview
Mounting points
PoE + data out
(PoE port)
Power LED
Data in
(LAN port)
Power
cable
1.
2.
3.
Physical installation
1. Connect one end of the included Ethernet cable into the
PoE port of the PoE Injector and the other end to the PoE
port of an 802.3af or at-compatible access point (marked
with a symbol on the A Series).
2. Connect the second Ethernet cable into the LAN port of the
PoE injector and the other end to a router or switch to pro-
vide LAN access. Note that if you are using this PoE injector
to power a mesh repeater, skip this step.
3. Connect the power cord to the PoE injector and plug the
other end into an electrical outlet. Support and resources
Visit help.cloudtrax.com for additional resources, video guides
and to contact technical support.
Specifications
Input: 100V–240VAC ~ 0.8A, 50–60Hz
Output:
30W
Pin 4,5: 54V
Pin 7,8: Return
Operating Temperature: 0 to 40C (32–104F)
Storage Temperature: -20 to 70C (-4–158F)
Compatible with 10/100/1000 Mbit/s Ethernet, full duplex