Open Mesh OM2P User manual

OM2P
Quick Start Guide
Mounting template
67mm
Outdoor mount
Convert this access point to an outdoor model, protected from
the sun and rain, and mount to any wall or pole using screws or
included zip ties. Order part ODHOM1P.
1. 3.2.
We help professionals create powerful, easy-to-use networks that automatically spread Internet
connections throughout hotels, apartments, retail stores, restaurants, small and medium-sized
businesses—and just about anywhere else.
The Open Mesh OM Series access points are a modular, plug-and-play professional WiFi
solution that works with CloudTrax, a cloud-based network controller that can manage an
unlimited number of switches, access points and networks around the world.
openmesh.com
© 2016 Open Mesh, Inc. All Rights Reserved.

Continued on reverse side
Access point overview
Wall mount
Mount this access point directly to the wall by screwing two
pan head Phillips wood screws, 3.5 × 20 mm (diameter x
length, European) or #6 type screw, 1" long (US) into a wall
using the positions marked on the back of this guide. Leave
3/16" (0.5 cm) of each screw exposed. Slide the access point
over the screws to secure it to the wall.
12–24VPOE
Power
Ethernet 1
Ethernet 2
WiFi
24V 1.0A
Ethernet 1, 12–24V PoE
Ethernet 2
Wall plug mount
Securely attach to the center or bottom screw of a North
American standard and decora-style wall outlet and hide
the access point and power supply inside. Ideal when using
this access point as a power-only mesh repeater. Order part
IDWHOM1P (includes power supply).
Cloud management
1. Download the CloudTrax mobile app for iOS or Android,
or sign up at cloudtrax.com. (It’s included with this access
point.)
2. Follow the prompts to verify your account and create your
first network. If you already have a network, create a new
one by navigating to Network → Create new network.
3. Follow the prompts to add your first access point. If you’re
adding this access point to an existing network:
In the CloudTrax mobile app: select Add Access Point from
the top menu and scan the QR code on the bottom of the
access point.
On cloudtrax.com: navigate to Manage → Access Points →
Add New and enter the MAC address. Use the drop-down
arrow to enter multiple MAC addresses at once or upload
a CSV file.
Repeat this process to add as many access points as
required.
4. Set your configuration. Once your access point has power
and Internet, CloudTrax will configure the access point and
start reporting status within a few minutes.
Physical installation
This access point is modular and can be placed on a desk,
mounted on a wall, or, with an optional enclosure, mounted
on a ceiling, standard US power outlet (as a mesh repeater),
Ethernet wall jack, or on an outdoor wall or pole. Regardless
of how you mount this access point, keep the following in
mind:
● Place the access point in the center of the room and away
from any metallic surfaces.
● This access point radiates signal in all directions equally,
so position it however you like.
● Do not place heavy objects on the access point.
● The access point prefers a cool, dry environment. Don’t
place the access point in direct sunlight unless you’re
using the outdoor enclosure.
● Install the access point in an area free from strong
electromagnetic sources.
● Check the power cord and Ethernet cables to ensure they
are fully secured to both the access point and wall outlet
or switch.
● Do not install this access point in plenum spaces. Use the
ceiling enclosure instead.
Support and resources
Visit help.cloudtrax.com for additional resources, video guides
and to contact technical support.