OpenEye OE-C3011D4-S User manual

OE-C3011D4-S Hardware Manual - Features and Contents
OE-C3011D4-S Hardware Manual - Features and Contents
Important Safeguards
Warranty
Product Description
Camera Dimensions
Connections
Features
Box Contents
Important Safeguards
View Important Safeguards before installing the camera.
Warranty
View the Product Warranty for the camera.
Product Description
The OE-C3011D4-S is a 4MP indoor IP dome camera equipped with person, vehicle, and line crossing detection
analytics. The 2.7~13.5mm varifocal, autofocus, zoom lens delivers crisp and clear images. True WDR and True Day/
Night provide superior images in varied lighting environments. Adaptive IR technology prevents overexposure of objects
close to the camera further enhancing the low light performance. Progressive Smart Compression reduces network
throughput and storage requirements without impacting overall video quality and retention. Additional features include
audio in/out, as well as sensor and relay connections supported by the enhanced remote monitoring capabilities of the
OWS platform. The OE-C3011D4-S is compatible with a wide range of accessories allowing it to be mounted in a broad
range of applications.
The OE-C3011D4-S is ONVIF™ profile S/G/T compliant and fully compatible with the OpenEye Web Services platform,
allowing multiple users to concurrently view high quality images and perform remote setup using a Web browser.
Copyright © OpenEye 2023 1

Camera Dimensions
Connections
1 RJ45 - For network and PoE connections
2 Power (12vDC)
1 12vDC +
Power Connection
2 GND -
3 Reset Button - To restore the camera to factory defaults:
Copyright © OpenEye 2023 2

1. Disconnect power for 30 seconds.
2. Reconnect power and wait 30 seconds.
3. Press and hold the reset button for 20 seconds.
4 Alarm & Audio I/O
1 Alarm Out -
Alarm connection
2 Alarm Out +
3 GND Ground connection
4 Alarm In Alarm connection
5 GND Ground connection
6 Audio In Two-way audio transmission
7 GND Ground connection
8 Audio Out Two-way audio transmission
5 microSD Card Slot - Supports up to 512GB microSD card for Edge storage.
Do not add or remove the microSD card when the camera is powered on.
6 Built-in microphone
Power Connection
For an adequate power connection, use a 12vDC adaptor. Alternatively, you can power the camera by PoE if a Power
Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected.
NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power
source when providing the camera with 12vDC power.
If using Power over Ethernet (PoE), make sure Power Sourcing Equipment (PSE) is in use in the network.
Product Features
• Person, Vehicle, Line Crossing Detection Analytics
• Internal Network Connection
• Corridor Mode
• NDAA Compliant
Copyright © OpenEye 2023 3

• True WDR @ 4MP
• Adaptive IR | up to 98' range
• 2.7~13.5mm VF, AF, Zoom Lens
• 4MP | up to 30FPS
• Audio I/O
• Alarm I/O
• Optional Paintable Dome Cover (Free Upon Request)
• Built-in microphone
Box Contents
OpenEye C3011D4-S cameras come with self-tapping screws and plastic anchors, mounting template, a tapered RJ45
sleeve, a torx tool, a #2 Phillips bit, 21mm cable grommets, 28mm cable grommets, and a 2-pin terminal block. Identify
the following components to make sure everything has been properly included with your new recorder. If any of the
following items are missing, contact the dealer to arrange a replacement.
OE-C3011D4 -S Turret Camera Self-Tapping Screws and Plastic Anchors x3
Mounting Template Tapered RJ45 Sleeve
Copyright © OpenEye 2023 4

Torx Tool #2 Phillips Bit
2x - 21mm Cable Grommet 2x - 28mm Cable Grommet
2-Pin Terminal Block
Related Links
OE-C3011D4-S
OE-C3011D4-S Quick Start Guide
Update the firmware on a 10/20/30/32 Series OpenEye Camera
Network Camera Manager
Copyright © OpenEye 2023 5