OpenEye OE-C7094-AWR User manual

35568AF 1
4MP/8MP IP
BULLET CAMERA
USER MANUAL
MODELS:
OE-C7094-AWR / OE-C7098-AWR

2
OE-C7094-AWR / OE-C7098-AWR 4MP/8MP IP Bullet Camera
User Manual
Manual Edition 35568AF – February 2021
©2021, OPENEYE
All Rights Reserved.
No part of this documentation may be reproduced in any means, electronic or mechanical, for any
purpose, except as expressed in the Software License Agreement. OpenEye shall not be liable for
technical or editorial errors or omissions contained herein. The information in this document is subject to
change without notice.
The information in this publication is provided “as is” without warranty of any kind. The entire risk arising
out of the use of this information remains with recipient. In no event shall OPENEYE be liable for any
direct, consequential, incidental, special, punitive, or other damages whatsoever (including without
limitation, damages for loss of business profits, business interruption or loss of business information),
even if OPENEYE has been advised of the possibility of such damages and whether in an action or
contract or tort, including negligence.
This documentation is copyrighted. All other rights are reserved to OPENEYE. OPENEYE, and OpenEye, are
registered trademarks of OPENEYE in the United States and elsewhere; Windows, and Windows XP
Embedded are registered trademarks of Microsoft Corporation. All other brand and product names are
trademarks or registered trademarks of the respective owners.
OPENEYE
Liberty Lake, WA ●U.S.A.

35568AF 3
Important Safeguards
Read Instructions
Read all of the safety and operating instructions before using the product.
Retain Instructions
Save these instructions for future reference.
Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance
manufacturer as they may cause hazards, damage product and void warranty.
Installation
Do not place or mount this product in or on an unstable or improperly supported location.
Improperly installed product may fall, causing serious injury to a child or adult, and
damage to the product. Use only with a mounting device recommended by the
manufacturer, or sold with the product. To insure proper mounting, follow the
manufacturer's instructions and use only mounting accessories recommended by
manufacturer.
Power source
This product should be operated only from the type of power source indicated on the
marking label.
Precautions
Operating
Before using, make sure power supply and others are properly connected.
While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact your local dealer.
Handling
1. Do not disassemble or tamper with parts inside the camera.
2. Do not drop or subject the camera to shock and vibration as this can damage camera.
3. Care must be taken when you clean the clear dome cover. Scratches and dust will ruin
the image quality of your camera.Do not use strong or abrasive detergents when
cleaning the camera body. Use a dry cloth to clean the camera when it is dirty. In case
the dirt is hard to remove, use a mild detergent and wipe the camera gently.

4
Installation and Storage
1. Do not install the camera in areas of extreme temperatures in excess of the allowable
range; install the camera in areas with temperatures within the camera’s operating
temperature, including the following: -31 ~ 140 ºF (-35 ~ 60 ºC).
2. Avoid installing in humid or dusty places. The relative humidity must be below 90%.
3. Avoid installing in places where radiation is present.
4. Avoid installing in places where there are strong magnetic fields and electric signals.
5. Avoid installing in places where the camera would be subject to strong vibrations.
6. Never face the camera toward the sun. Do not aim at bright objects. Whether the
camera is in use or not, never aim it at the sun or other extremely bright objects.
Otherwise the camera may be smeared and damaged.
Regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Compliance is evidenced by written declaration from our suppliers, assuring that any
potential trace contamination levels of restricted substances are below the maximum level
set by EU Directive 2002/95/EC, or are exempted due to their application.

35568AF 5
Warning
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Caution
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

6
Table of Contents
INTRODUCTION............................................................................................................. 8
Overview................................................................................................................................................... 8
Product Features .................................................................................................................................. 8
GETTING STARTED ...................................................................................................... 9
Box Contents ............................................................................................................................................ 9
Camera Overview ................................................................................................................................... 10
Camera Dimensions ........................................................................................................................... 10
Connections........................................................................................................................................ 11
RESETTING THE CAMERA......................................................................................... 12
NETWORK CAMERA MANAGER SOFTWARE .......................................................... 13
NETWORK CAMERA MANAGER.................................................................................... 14
Launching Network Camera Manager................................................................................................ 14
Finding Network Devices.................................................................................................................... 14
Username and Password ................................................................................................................... 15
Viewing a Network Camera................................................................................................................ 15
Live View ................................................................................................................................................ 16
Setup & Configuration............................................................................................................................. 17
Basic Camera Settings ....................................................................................................................... 17
Basic Information ............................................................................................................17
Network Settings ................................................................................................................................ 18
Network ...........................................................................................................................18
IP Address (DHCP/Static IP)...........................................................................................18
IPv6 Address Configuration ............................................................................................18
DNS.................................................................................................................................19
Port..................................................................................................................................19
Port-Mapping...................................................................................................................20
DDNS ..............................................................................................................................20
FTP .................................................................................................................................21
Email ...............................................................................................................................22
Streaming Settings ............................................................................................................................. 23
Video ...............................................................................................................................23
Snapshot .........................................................................................................................24
Region of Interest (ROI) ..................................................................................................25
Media Stream..................................................................................................................26
Picture Settings .................................................................................................................................. 27
Image ..............................................................................................................................27
Scenes ............................................................................................................................27
Image Enhancement .......................................................................................................28
Exposure .........................................................................................................................29
Smart Illumination ...........................................................................................................30
White Balance .................................................................................................................30
Advanced ........................................................................................................................30
On-Screen Display ..........................................................................................................31
Privacy Mask...................................................................................................................32
Events Settings....................................................................................................................................... 33
Alarms................................................................................................................................................. 33

35568AF 7
Motion Detection .............................................................................................................33
Audio Detection...............................................................................................................36
Alarm Input......................................................................................................................37
Alarm Output ...................................................................................................................38
Storage Settings ................................................................................................................................. 39
Security Settings................................................................................................................................. 40
User.................................................................................................................................40
Add User .........................................................................................................................40
Edit User .........................................................................................................................40
Delete User .....................................................................................................................40
Network Security .............................................................................................................41
Video Watermark ............................................................................................................43
Maintenance ....................................................................................................................................... 44
Time ................................................................................................................................44
Maintenance....................................................................................................................45
Software Upgrade ...........................................................................................................45
Device Restart.................................................................................................................45
Configuration Management.............................................................................................45
Diagnosis Information .....................................................................................................45
Logout .......................................................................................................................... 46

35568AF
INTRODUCTION
OVERVIEW
The OE-C7094-AWR and the OE-C7098-AWR are high power, outdoor IP bullet cameras equipped with a
4MP or an 8MP 2.8~12mm motorized autofocus lens that provides crisp and clear images. These
cameras include WDR and True Day/Night for improved low light performance, and adaptive IR
technology to prevent overexposure of objects close to the camera. Network throughput and storage
requirements are reduced thanks to H.264 smart encoding technology which dynamically compresses
the camera’s video to reduce its bitrate. These cameras are IP67 rated and function down to -31°F
making them a perfect fit for extreme weather installations. In addition, these cameras can be fully
powered over PoE, reducing labor costs by eliminating additional cabling requirements.
All OpenEye IP cameras are fully ONVIF™ compliant and are compatible with the OpenEye Web Services
platform, allowing multiple users to view high quality images and perform remote setup using a Web
browser.
PRODUCT FEATURES
8MP maximum resolution (OE-C7098-AWR only)
IP67 outdoor rating
2.8~12mm Autofocus Lens
True Day / Night
True Wide Dynamic Range
H.264 with Smart Encoding
1/2” Progressive CMOS image sensor
ONVIF™ Profile S compliant

35568AF 9
GETTING STARTED
BOX CONTENTS
Before proceeding, please check that the box contains the items listed here. If any item is missing or has
defects, DO NOT install or operate the product and contact your dealer for assistance.
OE-C7094-AWR or
OE-C7098-AWR IP Bullet
Camera
Waterproof Cable Connector
Torx Tool
Self-Tapping Screws and
Plastic Anchors x 3
Desiccant Packet
Quick Start Guide
Mounting Template

10
CAMERA OVERVIEW
Before installing or connecting the dome camera, please refer to this section and complete preparations
for dome setup and all switch settings.
CAMERA DIMENSIONS
Side
Base
2.9” (74mm)
9.6” (244mm)

35568AF 11
CONNECTIONS
Pin
Connection
Definition
1 RJ-45 For network and PoE connections
2 BNC For analog video input
3 Power (12vDC) Power connection
4 Audio In/Out Audio Out is reserved
5 Alarm I/O
Blue Ground
Brown Alarm input
Green Alarm Out -
Orange Alarm Out +

12
RESETTING THE CAMERA
1. Power cycle the camera.
2. Open the cover on the underside of the camera by removing the screws.
3. Touch each end of a paperclip to the holes marked “Reset” for 30 seconds.
4. Let camera finish booting as normal.

35568AF 13
NETWORK CAMERA MANAGER SOFTWARE
OpenEye Network Camera Manager (NCM) is a software tool that allows you to quickly and easily
connect and configure your OpenEye IP Cameras. This software allows you to assign IP addresses,
manage users, configure video settings, and update firmware on multiple cameras at once.
The Network Camera Manager software is pre-installed on all OpenEye Recorders, and is also available
for download on the OpenEye website for installation on your personal computer or laptop.

14
NETWORK CAMERA MANAGER
OpenEye Network Camera Manager (NCM) is a software tool that allows you to quickly and easily
connect and configure your OpenEye IP Cameras. This software allows you to apply the camera
password, assign IP addresses, configure video settings, and update firmware on multiple cameras at
once.
NCM is pre-installed on all OpenEye Recorders and is also available for download www.OpenEye.net for
installation on your personal computer or laptop. Network Camera Manager is a Java application, this
allows it to be installed on Windows and Linux operating systems.
LAUNCHING NETWORK CAMERA MANAGER
APEX WINDOWS PLATFORMS
Network Camera Manager can be found on the desktop.
Linux Platforms
In the Apex Settings menu, go to the Cameras page and click Advanced.
FINDING NETWORK DEVICES
Click Refresh to reload the Device List.
To narrow your search by Camera Model or Network, use the Model Filter and Networks dropdowns.
A Mac Address search is also available if you are looking for a specific device.

35568AF 15
USERNAME AND PASSWORD
*OpenEye IP cameras ship without a default password.
Username: admin
Note Passwords must be 9-32 characters including at least two elements of the following three:
digits, letters, and special characters.
The admin user password can be set using the following methods:
1. OpenEye recorders running Apex 2.1 or newer will automatically set a new unique password
if:
•Connected to an M-Series recorder with a built in PoE switch.
•Connected to a network switch through the camera network port and selected then
added in setup, if a new password has not already been set.
2. Connect to the camera directly through a Web Browser and follow the onscreen prompts.
3. Use the Network Camera Manager (NCM) Utility.
Note The NCM Software Manual can be found at https://www.openeye.net/ncm-manual.
Note Refer to your Apex recorder manual or quick start guide for instruction on adding cameras.
VIEWING A NETWORK CAMERA
Click Load in the row of the desired camera.
Enter a new Admin password.
•Passwords must be a minimum of 9 characters
•Accepted characters: A-Z, a-z, 0-9, all special characters are allowed.

16
LIVE VIEW
Note Live view is broadcast in MJPEG pass-through. Stream settings will be broadcast to your
recording device according to the selected Codec type.
Setup – View additional camera settings.
Proportional – Dropdown menu with Live View image
options including:
Stretch: Fit the camera image to the entire
viewing window without scaling the image
proportionately to the original view.
Scale: Fit the camera image to the entire
viewing window, including scaling the image
proportionately to the original view.
Original: The camera image will fit in the viewing window in accordance with the default
image resolution.
Image – Shortcut to camera Image Setup menu.
Logout – Log out of the currently displayed camera.

35568AF 17
SETUP & CONFIGURATION
BASIC CAMERA SETTINGS
Basic Information
The Basic Information tab displays the product model, firmware, network, and MAC address for the
connected camera, along with the current camera Status.
The nested Image, Video, Network, and Time tabs are shortcuts to the more advanced menu options
further down the Setup list. For more information about these tabs, see the appropriate sections later in
the manual.

18
NETWORK SETTINGS
Network
The Network tab allows you to configure the
connected camera network settings.
IP Address (DHCP/Static IP)
You can use the dropdown menu to choose to use a
Static (fixed) IP address, PPPoE, or a dynamic IP
address (assigned by a DHCP server or router) for the
camera.
To set up a new static IP address:
1. Select the Static IP dropdown option.
2. Type a new IP address in the IP address box.
3. Type a new address in the Subnet Mask box.
4. Type a new address in the Default Gateway box.
5. Click Save to confirm the new setting.
IPv6 Address Configuration
To enable IPv6 select Enable IPv6 and click Save. See your network administrator if you are unsure of
your network configuration.
When using static IP address to log in to the IP Camera, you can access it either through OpenEye IP
Finder software or type the IP address directly in the address bar of your web browser.
IP Address –Default IP with no DHCP server is set to 192.168.51.2.
Subnet mask –Used to determine if the destination is in the same subnet. The default value is
255.255.255.0.
Default gateway – Used to forward frames to destinations on different subnets or for internet access.
Web Server port – Defines the port that Internet Explorer uses to connect over the web and view video. If
this port is changed then the new port must be defined when attempting to web connect (ex: if your
camera’s IP address is 192.168.0.100 and you change the web port to 8001, then you must type
http://192.168.0.100:8001 in your browser).

35568AF 19
DNS
Set your preffered DNS and alternate DNS server.
Port
HTTP Port – Configure your relevant port number.
Note If the HTTP port number has been occupied already, a “Port conflicts” message will display.
Ports 23, 81, 82, 85, 3260, and 49152 are occupied by default.
HTTPS Port –The default HTTPS Port is 443; setting range: 1024 ~65535.
RTSP Port –The default RTSP port is 554; setting range: 1024 ~65535.
Note No port number can be used in duplication on more than one item.

20
Port-Mapping
To enable Port-Mapping:
1. Check the Port-Mapping Enable checkbox.
2. Use the Mapping Type dropdown menu to select a type.
3. If selecting Manual, the external ports must be configured.
Note If the configured port is already occupied, then the Status will show as inactive and a new port
must be selected.
4. Click Save.
DDNS
DDNS (Dynamic Domain Name Service) is a service that allows a connection to an IP address using a
hostname (URL) address instead of a numeric IP address. Most ISPs use Dynamic IP Addressing that
frequently changes the public IP address of your internet connection; this means that when connecting to
the camera over the internet, you need to know if your IP address has changed. DDNS automatically
redirects traffic to your current IP address when using the hostname address.
Enable DDNS – Select the check box to enable DDNS.
DDNS Type / Server Address – Enter the DDNS type provided by your DDNS server.
Domain Name – Type the registered domain name in the field.
Username/E-mail – Type the username or e-mail required by the DDNS provider for authentication.