Ophit DAD-U100 User manual
Thank you for purchasing DAD-U100
Analog to Digital converter DAD-U100 converts your VGA analog signal to DVI digital signal so that display
devices without VGA port can be connected to your PC with VGA port easily and conveniently.
www.ophit.com
User’s Guide
VGA to DVI Converter
DAD-U100
User’s Guide
Check the package and make sure you have everything:
Contents
(1) DAD-U100 –VGA to DVI Converter
(2) +5V DC Power supply x 1pc
(3) User’s Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
Check your package Installation
Installation Steps:
1. Connect the included +5V DC power supply to DAD-U100 and check
power indicator become active.
2. Connect the source device to DAD-U100 VGA input port.
3. Connect the display device to DAD-U100 DVI output port.
4. Connect the monitoring display device to DAD-U100 VGA output port.
It’s optional.
5. Resolution LED indicator will glow bright green.
NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
VGA Input DC +5V
Power
DVI & VGA Output
Power LED
indicator Resolution LED indicator
UXGA
WUXGA 1080p SXGA XGA
User’s Guide
Button name and Function Application
Button name
Description
Clock
adjusts clock : increase(+) /decrease(-)
Phase
adjusts phase : increase(+) /decrease(-)
Reset
Reset to initial setting
Up/Down/Right/Left
(▲/▼/▶/◀)
adjusts screen location
Adjust screen using buttons in the top of converter.
Clock
+
-
Phase
+
-
Reset
Down
Up
RightLeft
▲
▼
◀▶
We, OPHIT hereby warrant the final purchase of our product as follows.
In the case of troubles on our products, please contact the shop purchased.
One year limited warranty
Our customers have right to be served with free of charge when there is trouble in this product during 1(one) year from the day purchased.
Out of warranty services
When you request services (in the case of non manufacturing defects but the troubles by misusage), may served with charge as follows.
- Defects of products caused by accident, disaster.
- Damages of products caused by the customer’s carelessness or mistaken application.
- Damages of products caused by the application of the parts or products not supplied or sold by our company.
- Damages of products and related defects caused by not our staff or the men or group not nominated by us for services.
The interchanged parts and products for maintenance services shall be replaced as new parts and products operating
normally, and the inter-changed parts and products shall be subjected to our company.
Warranty
www.ophit.com
RMA Request Form
Customer Name:
Return Date:
Company Name:
Phone:
Model Name:
E-Mail:
Serial No:
Place of Purchase:
Address: (For RMA Return)
RMA details: (Please describe RMA status, application used and failure symptom)
RMA No.:
www.ophit.com
Technical and Sales Support
REV. 1.1
USA
Foreseeson Custom Display
2210E, Winston Road Anaheim,
CA 92806 USA
Tel: +1-714-300-0540
Fax : +1-714-300-0546
KOREA HQ
OPHIT CO., LTD.
3F Suntechnovil,5-27 Mangpo-Dong, Youngtong-Gu, Suwon-City,
Kyunggi-Do, Korea (443-400 )
Tel: + 82 (0)31 695 5543
Fax: + 82 (0)31 695 5545
E-mail:
Support @ophit.com
Europe
Foreseeson GmbH
Benzstr. 9, 61352 Bad
Homburg Germany
Tel.: +49 (0)6172 185310 20
Fax: +49 (0)6172 185310 11
E-mail: christianelfert@foreseeson.de
UK
Foreseeson UK Ltd
Unit 2Kingsmill Business Park, Chapel Mill Rd.
Kingston Upon Thames, Surrey; KT1 3GZ; UK
Tel : +44 (0)208 546 1047
Fax : +44(0) 208 546 3931
www.ophit.com
© 2012 OPHIT CO., LTD. All rights reserved.
Printed and designed in Korea
Regional Office
Table of contents
Other Ophit Media Converter manuals
