
①
②
③
Ⅰ.VIEW
Ⅲ.OPERATION
3.Rear view
- 1 - - 2 -
Temperature: -25℃-55℃
Relative humidity:45%-95%
Atmospheric pressure:86Kpa~108Kpa
Fire endurance rating:IP33
Resolution:800*480
1.Front view
Working voltage:DC13.5V
Working current:600mA
Dimension:205*125*25mm
Installation: wall mounted
N.W.:330g
1.
2.
3.
4.
5Leave messages
6.Auto shut down
Intercom
Unlock
Monitor
Auto take photo
7.Time and date display
8.12 ringtones for option
9.Intercom between monitors
10.Adjust image
11.Adjust ring tones volume
12.Adjust intercom volume
2.Side view
①
② Adjust volume of ringtone
③ Adjust volume of intercom
Multi-functions button
Ⅱ.FUNCTIONS
12
①
②
③
④
④
⑤
⑥
① Power indicator
③ Record
④ Monitor
⑤ Unlock
⑥ Intercom
② Intercom indicator
⑦ MIC
⑦
四 功能设 置
+
VCC
_
+12V
G
AU
VI
D
+12V
V2
G
G
V3
AU V4
VI G
D
D1
⑤
3
1. :press “ ” button to communicate with visitor when indoor phone rings.
In standby states, press “monitor” and “ ” button can also communicate with
outdoor bell.
2.Intercom between indoor phones: press “Intercom” button to communicate with each
indoor monitors.
3.Unlock:press “unlock” button to open the door lock in intercom states or monitor states.
4.Monitor:In standby,press “Monitor” button to view the outdoor station,press again to turn
to another camera channel,and then stop.
5.Auto take photo: indoor phone will auto take photo in calling states or monitor states.
6.Leave messages: in calling states, if no answer after 20 seconds, visitor will hear”Thank you
for your visiting, unfortunately we are not available now, please leave your message.”
visitor can leave audio messages in 35 seconds.
7.Check messages:move up the m ,then move up or
down to check message, and press “menu” button (confirm button) again to play, former
message, next message, play or stop, delete the message, back into main menu.
8.Check photos: choose photo icon and press menu butoon, then move up or down to
choose the photo and press “menu” button again to check. delete all
photos.
9.Choose ringtones: choose ringtone icon and press menu button, then move up or
down to choose ringtones.
10.Adjust volume of ringtones: please adjust button at side.
11.Adjust volume of intercom: please adjust button at side.
12.Time setting: choose time icon and press menu button, then move up or down to set
up time.
13.Date setting: choose date icon and press menu button, then move up or down to set
up date.
14.Adjust image: choose related icon and press menu button to adjust brightness,
contrast, color.
Intercom Intercom
Intercom
ulti-functions button to check message
(confirm button)
②
③
IV.SPECIFICATIONS
D2
D3
D4
①
②
③
Connect with power adapter
Connect with indoor phone
Connect with outdoor station
④
⑤
②
③
①
+ Power "+"
12V Connect with power supply wire
of outdoor station
G Common wire
AU Intercom&unlock line
Vi Video line
D Connect with other indoor phone
- Power "-"
Connect with camera
Connect with alarm zone(No use for villa system)
Ⅱ.FUNCTIONS
Instruction of multi-functions button
1. move down/reduce
2. move up/increase;
3. menu button in standby states; confirm button
check message button in
standby states