Opiz OP-D6A8M4 User manual

OP-D6A8M4
Thank you for your kindly purchasing our product.
Please read this user manual carefully before using the product and following instructions
exactly on how to install and use the product.
User Manual
Video Door Phone
tip
OPIZ ELECTRONICS CO.,LTD.
www.opizcn.com
Outdoor station
Monitor
Ⅴ.PROGRAMMING
+
_
+12V G AU VI D
V2 V3 V4 G
+12V G AU VI
+12V G AU VI D

①
②
③
Ⅰ.VIEW
Ⅲ.OPERATION
3.Rear view
- 1 - - 2 -
1.Front view
1.
2.
3.
4.
6.Auto shut down
7.Time and date display
Intercom
Unlock
Monitor
Auto take photo
5.Auto video record
8.12 ringtones
9.Intercom between monitors
10.Adjust image
11.Adjust ring tones volume
12.Adjust intercom volume
13.Can connect 3 CCTV
2.Side view
①
② Adjust volume of ringtone
③ Adjust volume of intercom
Multi-functions button
Ⅱ.FUNCTIONS
12
①
②
③
④
④
⑤
⑥
① Power indicator
③ Record
④ Monitor
⑤ Unlock
⑥ Intercom
② Intercom indicator
⑦ MIC
⑦
四 功能设 置
+
VCC
_
+12V
G
AU
VI
D
+12V
V2
GV3
AU V4
VI G
D
3
1. :press “ ” button to communicate with visitor when monitor rings.
In standby states, press “monitor” and “ ” button can also communicate with
outdoor station.
2.Intercom between monitors: press “Intercom” button to communicate with others monitors.
3.Unlock:press “unlock” button to open the door in intercom states or monitor states.
4.Monitor:In standby, press “Monitor” button to view outside, press again to turn to another
camera channel, and then stop.
7.Choose ringtones: choose ringtone icon and press menu button, then move up or down
to choose ringtones.
8.Adjust volume of ringtones: please adjust button at side.
9.Adjust volume of intercom: please adjust button at side.
10.Time setting: choose time icon and press menu button, then move up or down to set
up time.
11.Date setting: choose date icon and press menu button, then move up or down to set
up date.
12.Adjust image: choose related icon and press menu button to adjust brightness,
contrast, color
Intercom Intercom
Intercom
5.Check photos/vedio record: Device can setting auto-take photo or video. When set
auto-take photo below operation will into photo record directly. Or set auto-take video will
into video record directly.
A. Press the “Record”button into record, out off record menu by pressing“Record” button again.
B. Move multi-functions button up into record, press“Record”button to out off record menu.
Tip:In setting memu is record file include video and photo file.
6.Auto-take photo/video setting: (for setting auto- take photo or auto-video as calling)
Press multi-functions button in for coming to setting menu, choose photo/video setting icon ,
move multi-functions button down to choose phote/viedo and press confirm button again
to confirm setting.
②
③
①
②
③
Connect with power adapter
Connect with monitor ④
②
③
①
+ Power "+"
12V Connect with power supply wire
of outdoor station
G Common wire
AU Intercom & unlock line
Vi Video line
D Connect with other monitor
- Power "-"
Connect with camera
Ⅱ.FUNCTIONS
Instruction of multi-functions button
1. Down/reduce in menu states
Wake up/off screen in main menu/standby
2. Up/increase in menu states
Into photo/video record in standby states
3. Menu button in standby states
confirm button in menu states
Connect with outdoor station
Temperature: -25℃-55℃
Relative humidity:45%-95%
Atmospheric pressure:86Kpa~108Kpa
Fire endurance rating:IP33
Standby current:130mA
Working voltage:DC13.5V
Working current:450mA
Dimension:205*125*25mm
Installation: wall mounted
N.W.:330g
IV.SPECIFICATIONS