OPT7 AURA GRILLE User manual

GRILLE
INSTALLATION GUIDE
TM
MAIN COMPONENTS
LIGHT STRIPS
AURA CONTROL BOX REMOTE MOUNTING KIT
EXTENSION WIRES
HARDWIRE POWER HARNESS
ON
S+ M+
OFF
AUTO
S- M-

Decide where to locate the light strips
and ensure wiring has enough length
for control box to be installed in
desired location.
STEP 1
INSTALLATION
EXTENSION WIRE
FUSE
As shown below, connect all light strips to the control box with the included
extension cables.
1.
2.
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are mounted
in areas where will not exceed 85℃or 185℉.
WARNING

STEP 2
INSTALLATION
STEP 3
Secure the light strips using the zip
ties to tie all the wiring away from
the moving components.
Secure Control box in desired location
with Velcro or zipties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and
securely hidden from exposing
elements of moisture.
Note the
direction of
the arrows
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!!
TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
CORRECT INSTALLATION
IMPORTANT
! !
Flow direction

Using the included E-Z Remote, select
your desired color or pattern.
STEP 4
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product.
The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting
assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please
seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modied installations or installation recommendations not specied by OPT7
Lighting will void product warranty.
Power-ON
Automatic Color Change
Power-OFF
Speed +/- 8 Levels
Mode +/- 19 Mode
Dimmer 8 Levels
Color Selection 12 Colors
1
2
3
4
5
6
7
ON
S+ M+
OFF
AUTO
S- M-
  


 
BUTTON LAYOUT