opticis OP-HDWX-100-TR User manual

- 1 -
Wireless HDMI Extender, HDWX-100-TR
User’s Manual
Doc No. : OE-HW150102 / Rev2.0
WWW.OPTICIS.COM
Ver. 2.0

- 2 -
Contents
Welcome! .............................................................................................................................................- 3 -
Product Description..............................................................................................................................- 3 -
Shipping Group ....................................................................................................................................- 3 -
Supporting Resolutions........................................................................................................................- 3 -
Applications..........................................................................................................................................- 4 -
Systems Requirements for Setup ........................................................................................................- 4 -
Installation............................................................................................................................................- 5 -
LED Indication......................................................................................................................................- 6 -
SW & Factory Reset.............................................................................................................................- 6 -
GUI Setting...........................................................................................................................................- 6 -
Product Specifications....................................................................................................................... - 14 -
Mechnical Drawing............................................................................................................................ - 14 -
Bracket Installation............................................................................................................................ - 14 -
5GHz Wi-Fi Channels ....................................................................................................................... - 16 -
Troubleshooting ................................................................................................................................ - 16 -
A Guide for Upgrading ...................................................................................................................... - 16 -
Warranty Information........................................................................................................................ - 17 -

- 3 -
Welcome!
Congratulations on your purchase of the Wireless Extender for HDMI, Keyboard and Mouse,
HDWX-100-TR. This manual contains information that will assist you in installing and operating the
product.
Product Description
The OPTICIS wireless Extender, HDWX-100-TR is designed for wireless signals extending of HDMI,
keyboard and mouse. The transmitter module HDWX-100-T connected to the HDMI source encodes
the HDMI by H.264 and transmits the signal via advanced Wi-Fi, 802.11a/n technology. The receiver
module, HDWX-100-R connected to the display receives and decodes wireless signal into HDMI for
display. The USB keyboard and mouse interface in the receiver module, HDWX-100-R also can be
accessed to the source via transmitter module HDWX-100-T, if it is connected to the source by USB
interface.
The HDWX-100-TR supports the digital video data of full HD up to 1920x1080p at 60Hz and 7.1ch
surround audio and transmits the signal up to 30 meters (100feet). It also enables to distribute one (1)
video source up to four (4) displays and makes four (4) local keyboard and mouse accesses to the
source.
By using GUI interface, user can select one of active transmitters for pairing in the receiver side.
With these key features, 4 x 4 wireless routing system can be configured without any electrical
connection.
Shipping Group
HDWX-100-TR Wireless HDMI Extender: One (1) pair
HDWX-100-T: Transmitter (Tx)
HDWX-100-R: Receiver (Rx)
AC/DC power adaptor: Two (2) units of 5V, 2A
Two (2) HDMI male to male cables (1.2m)
User’s manual
Supporting Resolutions
480i60, 576i50
480p60, 576p50
720p50, 720p60
1080i30, 1080i50, 1080i60

- 4 -
1080p24, 1080p30, 1080p50, 1080p60
640x480p60
800x600p60
1024x768p60
1280x768p60
1280x960p60
1280x1024p60
1600x1200p60
1920x1080p60
Note: Some PC resolutions may not be displayed properly.
Applications
Home AV
KVM
Video Control room
Digital signage
Medical imaging
Systems Requirements for Setup
Hardware requirements
You must have a HDMI graphic controller or card having a HDMI or DVI port in your
PC or any other equipment being used. It should support the maximum graphic
resolution feature of displays to be connected.
No special requirements for memory size, CPU speed and chipsets, if you’ve
already properly installed your HDMI graphic controllers or cards.
Software requirements
No special restrictions, if you’ve already properly installed your HDMI graphic
controller in your OS.
AC/DC Power Adapter Technical Advisory
The HDWX-100-TR has a reverse voltage protection circuit and receiver (Rx)
module also has overcurrent protection circuit.
The HDWX-100-TR is designed to use mainly external +5V AC/DC power
adaptor. The internal power supplied through a HDMI pin (#18) from the
graphic source is used to identify normal connection between a source and
transmitter, HDWX-100-T.

- 5 -
Installation
Important: Please keep the installation procedure below. Improper or no operation may result
if the start-up sequence is not followed correctly.
Note: If you change a source to another source such as PC, Camcorder, DVD Player or Blu-ray
player, you have to reset the power of all Txs and Rxs by re-plugging of the +5V power
adaptor.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Connect HDWX-100-T to the HDMI source by supplied HDMI cable.
Step 3
Turn on the HDMI source and display.
Step 4 (Option for remote keyboard and mouse control)
Connect mini USB port in HDWX-100-T to USB port in PC with USB cable.
Step 5
Plug the +5V power adaptor to HDWX-100-T. Ensure the Power LED ON (Blue).
Step 6
Connect the HDWX-100-R to the HDMI displays by supplied HDMI cable.
Step 7 (In case of remote keyboard and mouse control)
Connect mouse and keyboard to two (2) USB ports in HDWX-100-R.
Step 8
Plug the +5V power adaptor to HDWX-100-T. Ensure the Power LED ON (Blue).
Fig. 1: Configuration of Transmitter, HDWX-100-T