Opticon OPH-1003 User manual

Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
Introduction
OPH - 1003
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or con-
verted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.
Caution and Warning
1. Laser Safety
•Donotstareintothelaserbeam.
2. Handling Instructions
【OPH-1003】
OPH-1003】】
•Donotattempttodisassemble,modifyorupdatethisdevice.
•Operatingthescannerwhileoperatingmachineryoravehiclecanbedistracting.
•Donotdropthisproductorputheavyitemsonthisproduct.
•Donotinsertforeignsubstancesintothedevice.
•Donotusethisproductinthefollowingareas:
-Inareasexposedtodirectsunlightforlongperiodsoftime.
-Industyenvironments.
-Nearwaterorotherliquids,orinextremelyhighhumidity.
-Nearheatsources,suchasradiators,heatregisters,stoves,orothertypesofdevicesthatproduceheat.
-Nearmicrowaves,medicaldevices,orlow-powerradiostations.
•Whencleaningthisproduct,rubgentlywitheitherasoftdryclothoradampclothwithmilddetergent.
【Battery Pack】
Battery Pack】】
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals
(such as a necklace or hairpin), a short-circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• Check the local regulations for proper battery disposal.
( Please refer to the specification manual and instruction guide for details.)
■Detailed View
Overview
■OPH-1003 Basic Specifications
Parameter Specifications
Physical
Features
Size (W) 55×(D) 23×(H) 136 mm Max
Weight 140g Max (excluding battery)
Color Black
Control
Section
MAIN CPU
32bit RISC CPU
Built-in ROM : N/A
Built-in RAM : 64KB
Clock frequency : 24MHz, 12MHz, STOP
External
Memory
FLASH ROM 2MB
SRAM 2MB
Extended FLASH ROM
64MB
LCD
Section
Material FSTN semi-transparent LCD
Backlight White LEDs
Active Area
33.58mm ×8.38mm
Number of
Dots
112 dots ×128 dots
Dot pitch : 0.30mm
Other Display
Section
LED Bi-color LED (Red and Green)
Buzzer
Tone and loudness can be congured.
Operation Section
Keys 22 keys
Scanning
Section
Light Source
Red laser diode
Wavelength 650±10nm
Light Output
1mW or less
Scan Rate 100scan / sec
Supported
Symbologies
JAN/UPC/EAN (WPC) incl. add on,
Chinese Post, Codabar/NW-7, Code
11, Code 39, Code 93, Code 128,
IATA, Industrial 2of5, Interleaved
2of5, ISBN-ISMN-ISSN, Korean Postal
Authority code, Matrix 2of5, MSI/
Plessey-UK/Plessey, RSS, S-Code,
Telepen, Tri-Optic, Composite codes
Power
Supply
Section
Main Power Supply
Lithium-ion battery (3.7V, 1100mAh)
Backup Power Supply
Lithium secondary battery
Operating Time
50 hours
Data Retention Time
7days
Comm.
Section IrDA IrDA Ver1.2
Baud rate : 2400bps to 115.2kbps
Clock
Section
Real Time
Clock (RTC)
Support year, month, day, hour,
minute, second. (leap year supported)
Durability
Operating Temp.
-10deg.Cto50deg.C
Operating Humidity
20% to 85% (non-condensing)
Storage Temp.
-20deg.Cto60deg.C
Storage Humidity
20% to 85% (non-condensing)
Charging Temp.
0 deg. C to +40 deg. C
Ambient
Light Immu-
nity
Incandescent Light : 4,000 lx
Fluorescent Light : 4,000 lx
Sunlight : 80,000 lx
Dust- and Drip-proof
IP54
Shock En-
durance
Dropped 18 times onto concrete from a
height of 150cm with no defects found.
Copyright©2007, Opticon All rights reserved.
No. Item Function
1Portable Terminal A laser portable terminal with a barcode scanning feature.
2Lithium-ion Battery Pack Designated battery pack for the OPH-1003.
3Strap
4 Quick Start Guide Provides product information and instruction guide.
Before Getting Started
■What's in the Box
Confirm that you have the following items before getting started:
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
No. Part Function
①LCD
Indicates the status of program
execution, scanned data and so
on.
②Status LED
(Red and Green)
Alerts users the status of scanning
operation and data communication.
③Optical Window
The scan engine emits a laser beam
through the optical window while
scanning a barcode.
④SCAN Key
Starts a barcode scanning operation.
⑤POWER Key Turns ON or OFF the power.
⑥
IrDA
Communication
Window
This portable terminal communicates
with the designated cradle through
the IrDA communication window.
⑦Buzzer Hole
Buzzer sounds through the buzzer
hole.
⑧Battery Cover Protects the battery pack.
⑨Charging
Terminals
Electrical terminals for power distri-
bution and power management.
⑩Strap Hook
・
To avoid communication problems between the portable
terminal and a cradle, keep the IrDA communication
window clean.
・The IrDA communication performance may declineThe IrDA communication performance may decline
duetoexcessiveambientlightespeciallyunder
strong sunlight or inverted fluorescent light.
Memo

Overview
■Key Layout
Key Function
SCAN Scans a barcode.
Q1
Navigate through the menu or toggle between options.
( These keys can be programmed suitable for userʼs application. )
Q2
SHIFT Shifts from “number input mode ”to “alphabet
input mode ”and vice versa.
BS Deletes one letter before the cursor.
CLR Cancels an input.
POWER Turns the power ON and OFF.
0-9, . 10 numeric keys to input numbers, alphabets or
symbols.
ENT Determines the input.
F1-F4 4 function keys which can be programmed by a user.
ご使用にあたって
Trouble Shooting
The portable terminal does not get powered ON.
A. Thebatteryleveloftheportableterminalmaybeextremelyloworempty.Pleasetryagainafteryoucharge
the portable terminal.
B. Checkifthebatterycoverisclosedtight.
The portable terminal does not read a specific type of barcode.
A. Thatspecifictypeofbarcodemaynotbesupportedbytheportableterminal.Pleaseconfirmthespecificationmanual
of the portable terminal for details of supported symbologies.
B. Thespecifictypeofbarcodemaynotbeenabledintheapplication.Changethesettingsinyourapplication.
The portable terminal does not read a barcode smoothly.
A. Thescanningperformanceoftheportableterminalmaydeclineduetoinappropriatescanangle.Pleaseadjust
theangleoftheportableterminalandtryagain.Makesurethatthebarcodeiswithinthewidthofthelaser
aiming pattern.
Using the Portable Terminal
■How to Insert or Exchange a Battery
STEP3STEP2STEP1
Please open the battery cover before
insertingorexchangingabattery.
STEP
1
Make sure that the battery contacts are in
contact with the spring contacts of the
portable terminal.
STEP
2
Please close the battery cover.
STEP
3
Designated Cradles (Optional)*
We offer a series of communication and charging cradles with different communication methods.
Please select the most suitable cradle for the desired operation.
* Please refer to the specification manual or the instruction guide for details of designated cradles.
* A designated SIM card will be needed to use the CRD-1003 GSM cradle.
Memo
CRD-1001
Communication &
Charging Cradle Communication Method
(Cradle to Host) Communicates with the host via RS-232C or USB interface.
Size (H)70 ×(W)68 ×(D)96 mm Max
Weight 110g Max (excluding AC adapter and cable)
Charging Time 2 hours and 10 minutes
RS-232C USB
* The layout of keys may differ depending on the
product specification.
Memo
The Netherlands Opticon Sensors Europe B.V.
tel: [phone] /email: [email protected]
U.S.A. Opticon Inc.
tel: [phone] /email: [email protected]
France Opticon S.A.S.
tel: [phone] /email: [email protected]
Germany Opticon Sensoren GmbH
tel: [phone] /email: [email protected]
Italy Opticon s.r.l.
tel: [phone] /email: [email protected]
Spain Opticon Sensores S.L.
tel: [phone] /email: [email protected]
Contact
Sweden Opticon Sensors Nordic AB
tel: [phone] /email: [email protected]
United Kingdom Opticon Limited
tel: [phone] /email: [email protected]
Taiwan Opticon Far Eastern Ltd.
tel: [phone] / email: [email protected]
China
Opticon Sensors Europe B.V., Shanghai Representative Oce
tel: [phone] /email: [email protected]
Australia Opticon Sensors Pty. Ltd.
tel: [phone] /email: [email protected]
Brazil Opticon Sensors Europe B.V., Latin American Oce
tel: [phone] /email: [email protected]
Please contact OPTICON or your local dealer.
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.OPH10039062-0-00
Communication Method
(Cradle to Host)
Communicates via telephone line and connects to the Public
Switched Telephone Network (PSTN)
Size (H)70 ×(W)68 ×(D)96 mm Max
Weight 100g Max (excluding AC adapter and cable)
Charging Time 2 hours and 10 minutes
MODEM
CRD-1002
Communication &
Charging Cradle
Communication Method
(Cradle to Host)
Communicates with the host via GSM (Global System for Mobile
Communications) Network.
Size (H)70 ×(W)68 ×(D)96 mm Max
Weight 115g Max (excluding AC adapter and cable)
Charging Time 3hours
GSM
CRD-1003
Communication &
Charging Cradle
Correct Incorrect
■HowtoScanaBarcode
Please refer to the following examples of a scanning operation.
Make sure that the barcode is within the width of the laser aiming pattern.
* When the cover is not closed correctly the portable terminal will not be turned ON.