Opticon OPH-5000i User manual

OPH-5000i
1st
1
OPH-5000i
Handy Terminal with Bluetooth
This manual provides specifications for the OPH-5000i Wireless
LAN Handy Terminal with imager scanner.
1st

OPH-5000i
1st
2
The information in this document is subject to change without notice.
Document History
Model Number: OPH-5000i Specification Number: SS16051
Edition: 1st Original Spec Number: (SS16003)
Date: 01-September-2016
2016 Copyright Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING
OR USING THE PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL [phone]; FAX [phone]
SUPPORT
USA Europe
Phone: [phone]
Email: [email protected] Email: [email protected]
Web: www.opticonusa.com Web: www.opticon.com

OPH-5000i
1st
3
Revision History
Product Name : OPH-5000i
Edition Date Page Section Description of Changes
1st 2016/09/01 - - -

OPH-5000i
1st
4
Contents
1Abstract............................................................................................................................6
2Overview..........................................................................................................................6
3Basic Specifications.......................................................................................................7
4Detailed View.................................................................................................................10
5Electrical Specifications...............................................................................................13
5.1 Electrical Specifications.......................................................................................................... 13
5.2 Wireless Charging .................................................................................................................. 13
6Interface Specifications................................................................................................13
6.1 USB Interface ......................................................................................................................... 13
6.1.1 Connector ....................................................................................................................... 13
6.1.2 USB Interface Circuit ...................................................................................................... 13
6.2 Bluetooth ................................................................................................................................ 14
6.3 Wireless LAN.......................................................................................................................... 14
6.3.1 IEEE 802.11b.................................................................................................................. 14
6.3.2 IEEE 802.11g.................................................................................................................. 14
6.3.3 IEEE 802.11n.................................................................................................................. 14
6.4 Built-in NFC Tag..................................................................................................................... 14
7Optical Specifications...................................................................................................15
7.1 Basic Specifications ............................................................................................................... 15
7.2 Aiming Pattern........................................................................................................................ 16
8Technical Specifications..............................................................................................17
8.1 Barcode Test Sample............................................................................................................. 17
8.2 Scan Area and Depth of Field ................................................................................................ 19
8.3 Printed Contrast Signal (PCS) ............................................................................................... 20
8.4 Minimum Resolution............................................................................................................... 20
8.5 Barcode Width........................................................................................................................ 20
8.6 Pitch, Skew and Tilt................................................................................................................ 21
8.7 Curvature................................................................................................................................ 21
8.8 Motion Tolerance.................................................................................................................... 22
9Environmental Specifications......................................................................................23
9.1 Temperature........................................................................................................................... 23
9.2 Humidity.................................................................................................................................. 23
9.3 Ambient Light Immunity.......................................................................................................... 23
9.4 Dust and Drip Proof................................................................................................................ 24
9.5 Vibration Strength (without packing) ...................................................................................... 24
9.6 Vibration Strength (in individual packing)............................................................................... 24
9.7 Drop Impact Strength (without packaging)............................................................................. 24
9.8 Drop Impact Strength (in individual packaging) ..................................................................... 25
9.9 Electrostatic Discharge Immunity ........................................................................................... 25
10 Regulatory Compliance................................................................................................26

OPH-5000i
1st
5
10.1 LED Safety ............................................................................................................................. 26
10.2 Product Safety........................................................................................................................ 26
10.3 EMC........................................................................................................................................ 26
10.4 Other....................................................................................................................................... 28
11 RoHS ..............................................................................................................................28
12 Reliability.......................................................................................................................28
13 Precautions....................................................................................................................28
13.1 Radio Law............................................................................................................................... 29
13.2 Bluetooth ................................................................................................................................ 29
13.3 Frequency Baud ..................................................................................................................... 29
13.4 Usage Note ............................................................................................................................ 29
14 Product Labels..............................................................................................................30
15 Packaging Specifications.............................................................................................31
15.1 Individual Packaging .............................................................................................................. 31
15.2 Collective Packaging .............................................................................................................. 33
16 Physical Features..........................................................................................................34
16.1 Dimensions............................................................................................................................. 34
16.2 Weight .................................................................................................................................... 34
16.3 Mechanical Drawing ............................................................................................................... 34
17 Supported Symbologies...............................................................................................35
17.1 Default Setting........................................................................................................................ 35
17.2 Supported Symbologies ......................................................................................................... 35
17.2.1 1D Barcodes ................................................................................................................... 35
17.2.2 GS1 Databar, Composite Code...................................................................................... 36
17.2.3 2D Codes........................................................................................................................ 36
Table of Figures
Figure 1: Detailed View ......................................................................................................................... 11
Figure 2: micro USB B Connector ......................................................................................................... 13
Figure 3: Interface Circuit (USB) ........................................................................................................... 13
Figure 4: Aiming Pattern and Imaging Range ....................................................................................... 16
Figure 5: Scan Area and Depth of Field ................................................................................................ 19
Figure 6: Wide Barcode......................................................................................................................... 20
Figure 7: Pitch, Skew and Tilt................................................................................................................ 21
Figure 8: Curvature................................................................................................................................ 21
Figure 9: Motion Tolerance.................................................................................................................... 22
Figure 10: Drop Test.............................................................................................................................. 24
Figure 11: Product Label Position......................................................................................................... 30
Figure 12: Individual Packaging ............................................................................................................ 31
Figure 13: Collective Packaging............................................................................................................ 33
Figure 14: Mechanical Drawing............................................................................................................. 34

OPH-5000i
1st
6
1 Abstract
This manual provides specifications for the OPH-5000i 2D Handy Terminal with built-in Wireless LAN
and Bluetooth.
2 Overview
The OPH-5000i is compact imager scanner built-in and output scanned barcode and 2D code data to
hostdevice conected by TCP/IP via wiress LAN. Bluetooth is also aveliable for output.
・ OPH-5000i is handy terminal with a numeric keypad and TFT color LCD display.
・ All barcode data scanned is transmitted to a host device through the Wireless LAN, Bluetooth or
USB interface interface.
・ Wireless LAN supports IEEE 802.11 b/g/n.
・ Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented.
・ In addition to the current buzzer sound and LED display, vibration function is also equipped.
・ A green LED aiming line toward a target barcode can help the users find the appropriate scanning
position.
・ Alcohol can be used to wipe the scanner clean
・ The power source is 3.7 V 1100 mAh (typ.) Li-ion battery.
・ The charging is done through a dedicated charging cradle or USB interface.
・ The scanner is Apple MFi certified.

OPH-5000i
1st
7
3 Basic Specifications
Item Specification Note
Control Section
CPU 32bit CISC/96MHz
FROM 2Mbyte + 32KByte System area
FROM 1Mbyte Application area
RAM 16Mbyte
It may be cleared by
the removal of the
main battery.
FROM (storage) 128Mbyte For data area only
Input Section
Key type
Number 10 key
F1~F3 3 key
Power 1 key
Up, down, SCAN (Placed on top
panel) 3 key
SHIFT, BS, CLEAR, decimal point,
ENT 5 key
Side touch sensor 1 sensor for scan
Backlight White
Display Section
Display element TFT color LCD display
Backlight White, brightness adjustable
Display size 1.77 inch, (W)128× (L)128 dots
Font size 12/16/24 dot
Type of characters JIS Standard No.1 and 2, ANK
Structure of Characters
When in 12 dot Font mode
(digit × row)
Reduced-size ANK: 21×21
Half-size character: 21×10
Kanji character: 10×10
When in 16 dot Font mode
(digit × row)
Reduced-size ANK: 16×16
Half-size character: 16×8
Kanji character: 8×8
When in 24dot Font mode
(digit × row)
Reduced-size ANK: 10×10
Half-size character: 10×5
Kanji character: 5×5
LED red, green one place, and blue 1 place
Buzzer Loudness (3-level) / tone adjustable
Vibration motor Strength (3-level) / duration adjustable
RTC
Contents Year, month, date, hour, minute, second
Data and time are lost
when the main battery
is removed.
Accuracy ± 90 seconds per month
Interface
Wireless LAN
Specification IEEE 802.11 b/g/n compliant
Frequency 2412~2472MHz (1~13ch)
Maximum output 0.0026W/MHz IEEE 802.11b
Access method Infrastructure mode (STA)
Security WEP,WPA,WPA2

OPH-5000i
1st
8
Item Specification Note
Network stack TCP/IP, UDP, DHCP, ARP,
SSL, DNS
Bluetooth
Frequency 2402 ~ 2480 MHz
Specification Bluetooth Ver 2.1 compliant
Communication
distance 10 m Not guaranteed.
Output level Class 2 Max output 4 dBm
Profile SPP / HID
Built-in NFC tag ISO/IEC 14443 TYPE A, TYPE B
JISX6319-4
USB ・Full-Speed 12Mbps ( HID/COM )
・Hi-Power Bus-powered supported
Optical Section
Scanning method VGA CMOS area sensor
Scanning light source 1 Warm-White LED
Aiming light source 1 green LED
Effective pixels 0.30 million pixels
View angle Horizontal: about 38.0°
Vertical: about 28.9°
Supported 1D Symbologies
Symbologies
UPC-A, UPC-A Add-on, UPC-E,
UPC-E Add-on, EAN-13, EAN-13 Add-on, EAN-8,
EAN-8 Add-on, JAN-8, JAN-13, Code 39, Tri-Optic,
NW-7, Industrial 2 of 5,
Interleaved 2 of 5, S-Code, IATA, Code 93,
Code 128, MSI/Plessey, UK/Plessey, TELEPEN,
Matrix 2 of 5, Chinese Post Matrix 2 of 5,
Code 11, Korean Postal Authority code, Postal
Code
Refer to Chapter 17.
for details
Minimum resolution Code 39 : 0.1 mm PCS 0.9
Curvature R ≥16 mm ( 9-digit JAN)
R ≥20 mm (13-digit JAN) PCS 0.9
Barcode width 100 mm wide 0.2 mm resolution Code 39 (DOF 150
mm) is readable:
Motion Tolerance UPC 100% moving at 2m/sec (DOF 100 mm)
is readable:
Depth of Field
Code 39
Resolution (0.127) 90 ~ 110
Resolution (0.254) 65 ~ 185
Resolution (0.508) 65 ~ 260
Code 128 Resolution (0.2) 85 ~ 165
UPC Resolution (0.33) 55 ~ 195
GS1/Composite
Symbologies
GS1 DataBar , GS1 DataBar Limited,
GS1 DataBar Expanded,
Composite GS1 DataBar, Composite GS1-128,
Composite EAN, Composite UPC
GS1 DataBar:
formerly called
“RSS”
Minimum resolution GS1 DataBar : 0.169mm
Composite Code: 0.169mm
S
uppor
t
e
d
2D
Symbologies
Symbologies
PDF417 , MicroPDF417 , Codablock F ,
QR Code , MicroQR Code ,
Data Matrix ( ECC 0 - 140 / ECC 200 ) ,
MaxiCode( Modes 2 to 5 ) , Aztec Code ,
Chinese-sensible code
Disable Code 128
when Codablock F is
enabled.

OPH-5000i
1st
9
Item Specification Note
Minimum resolution (mm)
PDF417 : 0.169 mm
QR Code : 0.169 mm
DataMatrix : 0.169 mm
PCS 0.9
Depth of
field
(mm)
PDF417
Resolution (0.169) 85~ 135
PCS 0.9
Resolution (0.254) 65 ~ 180
QR Code
Resolution (0.212) 90 ~ 110
Resolution (0.381) 55 ~ 180
DataMatrix Resolution (0.254) 85 ~ 135
Common
Scan angle
Pitch : ±70°
Skew : ±70°
Tilt : ±360°
Minimum PCS 0.2 or more MRD 32% or more
Power Section
Main battery Lithium-ion 1100 mAh (typ.)
Up-time 20 hours or more *1
Charging time Less than 3 hour
Using dedicated
cradle.
Room temperature
25℃
Feeding system Electromagnetic guidance wireless charging,
microUSB
Operating (charging) voltage 4.5 ~ 5.5V Charging with USB
Current
consumption Charging Less than 500 mA
Environmental Specifications
Temperature
Operating -10 ~ 50°C
Storage -20 ~ 60°C
Humidity
Operating 20 ~ 85% No condensing
No frost
Storage 20 ~ 85%
Ambient light
immunity
Fluorescent 10,000 lx or less UPC 100%
Optical axis angle 75°
Distance: 100mm
Sunlight 100,000 lx or less
Vibration
10 Hz ~ 100 Hz, acceleration of 19.6 m/s
2
, 60
minutes per cycle, repeat in each X, Y and Z-
direction
Drop Drop the scanner 18 times (6 faces x 3) from a
height of 150 cm onto a concrete floor
Dust and drip proof IP54 equivalent
Regulatory Compliance
LED safety
JIS C 6802：2011 Class2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
Product safety EN60950-1:2005
IEC60950-1:2006
EMC
EN 55024:2010
EN 55032:2012+AC: 2013
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 300 328 V1.9.1
EN 302 291-2 V1.1.1
FCC Part 15 Subpart C, Subpart B Class A
VCCI Class A
For residential,
commercial and light-
industrial
environments
European conformity CE Marking

OPH-5000i
1st
10
Item Specification Note
Certification for Construction Design of Specified
Radio Equipment
Other Bluetooth logo certification
MFi license
Immunity
Test
ESD
No
distraction Air discharge (direct): ±15 kV Conditions:
IEC61000-4-2
compliant
No
malfunction Air discharge (direct): ±8 kV
Physical
Features
Dimensions 136 × 44 × 30.3(22) (WDH mm) () is grip dimension
Not include projection
Weight Approx. 120 g Excluding accessories
Including main battery
*1: When a barcode is read twice every 10 seconds at room temperature 25℃.
4 Detailed View
9
3
4
5
6
7
8
1
2
10
11
6
12
13
14
15
16

OPH-5000i
1st
11
Figure 1: Detailed View

OPH-5000i
1st
12
No Name Description
1 LED
Indicates operational status, such as scanning and
communication.
It is able to be controlled b
y
user’s pro
g
rams.
2 LCD Indicates scanned barcodes and operational items.
3 MicroUSB Connecter Cap MicroUSB connector is stored.
4 Buzzer Orifice Holes for buzzer.
5 Strap Orifice Holes for attaching a hand strap.
6 Scan Window LED illumination is emitted from this window to read barcodes.
7 Battery Cover Rechargeable battery is stored.
8 Battery Cover Lock Used to lock / open the battery cover.
9 Charging Coil The charging coil is located here with which the dedicated cradle
can su
pp
l
y
p
ower to the scanner.
10 NFC This is the location of the NFC tag. Hold an NFC reader close to
this area when the ta
g
has to be read.
11 Side Trigger Sensor Start an operation of reading code by touching.
12 Trigger Key Press when reading code.
13 Up and Down Key Key use for selecting item and moving cursor.
14 Numeric Keypad Numeric, enter, decimal point key and the key’s to support these
inputs.
15 F1, F2, F3 Function key.
16 Power Key Power On/Off key.

5 El
e
5.1 E
S
u
B
u
C
u
5.2
W
F
e
P
o
6 In
t
The OP
H
6.1 U
In
6.1.1
C
6.1.2
e
ctrical
S
lectrical
S
u
pply Voltag
u
s-power (C
l
u
rrent cons
u
W
ireless C
e
eding syste
o
wer consu
m
t
erface
S
H
-5000i inte
r
U
SB Interf
a
terface is F
u
C
onnecto
r
Signal
N
VC
DAT
A
DAT
A
(N
C
GN
USB Interf
a
S
pecific
a
S
pecificat
i
e
l
ass)
u
mption
harging
m
m
ption
S
pecific
a
r
face is sele
c
a
ce
u
ll Speed US
r
N
ame
C
C
A
(-)
A
(+)
C
)
D
a
ce Circui
t
Po
w
Su
p
Micro-
controller
a
tions
i
ons
: 4.5-5.5
V
: Hi-Pow
e
: Less th
a
: Electro
m
: Less th
a
a
tions
c
table from t
h
B interface.
C
ontact Nu
m
1
2
3
4
5
t
Figure 3:
w
er
pp
l
y
V
e
r ( 500mA
m
a
n 500m
A
m
agnetic ind
u
a
n 5W
h
ree types;
U
m
ber
:
Interface Cir
c
m
ax )
u
ction
U
SB / Bluet
o
Fig
u
c
uit (USB)
o
oth and Wir
e
re 2: micro U
S
USB Connec
t
O
e
less LAN.
S
B B Connec
t
c
to
r
O
PH-5000i
1st
13
t
or

OPH-5000i
1st
14
6.2 Bluetooth
The specifications of the OPH-5000i Bluetooth interface are as follows:
Specification : Bluetooth Ver 2.1 compliant
Frequency : 2402 MHz ~ 2480 MHz
Communication distance : 10 m
Output level : Class 2 (max 4 dBm)
Implemented profile : SPP / HID
Communication configuration : 1 to 1
Operating mode in communication : Master / Slave mode
Security mode : Authentication supported
Encryption : Encryption supported
6.3 Wireless LAN
The specifications of the OPH-5000i Bluetooth interface are as follows:
Specification : IEEE 802.11 b/g/n compliant
Frequency : 2412 MHz ~ 2472MHz (1~13ch)
Access method : Infrastructure mode, (STA)
Security : WEP 64/128, WPA-TKIP, 128-bit WPA2 CCMP (AES)
Network stack : IP, TCP, UDP, DHCP, ARP, SSL, DNS
6.3.1 IEEE 802.11b
Maximum output : 0.0026W/MHz
Supported data rate : 1, 2, 5.5, 11Mbps
6.3.2 IEEE 802.11g
Maximum output : 0.0013W/MHz
Supported data rate : 6, 9, 12,18, 24, 36, 48, 54Mbps
6.3.3 IEEE 802.11n
Maximum output : 0.0007W/MHz
Supported data rate : 6.5, 7.2, 13.0, 14.4, 19.5, 21.7, 26.0, 28.9, 39.0, 43.3,
52.0, 57.8, 58.5, 65.0, 72.2Mbps
6.4 Built-in NFC Tag
OPH-5000i has NFC tag built-in which record Bluetooth device address.
Frequency : 13.56MHz
Standard : ISO/IEC 14443 TYPE A, TYPE B and JISX6319-4

OPH-5000i
1st
15
Recorded Contents:
T
otal 928 byte
NDEF
Record #1
t
ype: ”application/vnd.bluetooth.ep.oob”
OOB data length: 8 Byte
MAC address: 00:12:6A:xx:xx:xx
Record #2
t
ype: ”T”
T
EXT data length: 15 Byte
T
EXT data: ”00126Axxxxxx”
Free area
Reserved area
*xx differ depending on the product.
Rewriting from external: possible
7 Optical Specifications
7.1 Basic Specifications
Item Characteristics
Scan method CMOS area sensor (white / black) -
Number of effective pixel (Column) × (Row) 640 × 480 dots
Image capture speed (*1) Frame rate 100 fps
Focal distance Distance from the front edge of scanner 109.2mm
View angle
Horizontal Approx. 38.0°
Vertical Approx. 28.9°
Diagonal Approx. 46.4°
Illumination light source
(LED × 1)
Color Warm white
Color temperature 2600～3700K
Maximum radiation output (*3) 114lm/W
Aiming light source
(LED × 1)
Color Green
Peak wavelength 535 nm
Maximum radiation output (*4) 87.4m/W
*1 The fastest seed of image capture
*2 Reference value extracted from the datasheet.
*3, *4 Reference value based on the datasheet (25°C, IF = 140 mA ).

7.2
A
T
1
2
T
-
-
A
iming Pa
t
T
he aiming i
s
1
. Fill light t
o
2
. Fill light w
T
he aiming
s
-
The horizo
n
a distance
-
The horizo
n
aiming wid
t
t
tern
s
used for t
h
o
recognize t
h
hen auto tri
g
s
pecification
s
n
tal width of
of L=85±20
n
tal imaging
t
h.
F
i
e following
p
h
e appropri
a
g
ger is used.
s
are as foll
o
the imaging
mm from th
e
field of view
i
gure 4:
A
imin
p
urpose:
a
te reading r
a
o
ws:
field of vie
w
e
front edge
o
at a distan
c
n
g Pattern an
d
a
nge.
and the hor
o
f the scann
e of L=85 m
d
Imaging Ra
n
i
zontal aimi
n
e
r.
m
is 100%±
1
ge
O
n
g width are
1
0% of the h
O
PH-5000i
1st
16
e
qual at
orizontal

OPH-5000i
1st
17
8 Technical Specifications
Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering
the angle of view may affect the scanning performance. The conditions for technical specifications are
as follows, unless otherwise specified in each section.
<Conditions>
Ambient Temperature and Humidity Room temperature, room humidity
Ambient Light 100 ~200 lux (on the surface of a barcode)
Angles Pitch: α= 0°, Skew: β= 15°, Tilt: γ= 0°
Curvature R = ∞
Power Supply Voltage 5.0 V
PCS (1D and 2D) 0.9 or higher
Scanning Test Accept the performance with 90% or more success rate
for 10 tries of scan. One reading should be 2 seconds.
Barcode Test Sample (1D and 2D) Specified below.
< Test chart >
For 1D codes, OPTOELECTRONICS test samples
For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for barcode
8.1 Barcode Test Sample
1D Barcodes
<Code 39>
Resolution Symbology PCS Size (mm) No. of Digits
0.1 mm (3.9 mil)
Code 39 0.9
26 × 10 16
0.127 mm (5 mil) 11 × 10 4
0.20 mm (7.9 mil) 100 × 10 31
0.254 mm (10 mil) 32.5 × 10 7
0.508 mm (20 mil) 43 × 25 4
<Code 128>
Resolution Symbology PCS Size (mm) No. of Digits
0.20 mm (7.9 mil) Code 128 0.9 52 × 10 36
<UPC>
Resolution Symbology PCS Size (mm) No. of Digits
0.330 mm (13 mil) 12-digit UPC
12-digit EAN 0.9/0.2 31.5 × 24.5 12/13
GS1 Databar/Composite
<GS1-limited>
Resolution Symbology PCS Size (mm) No. of Digits
0.169 mm (6.7 mil) Limited 0.9 12 × 1.5 14
0.169 mm (6.7 mil) Limited-Composite 0.9 12 × 3.0 26

OPH-5000i
1st
18
2D Codes
<PDF417>
Resolution Error Correction PCS Size (mm) No. of Character
0.169 mm (6.7 mil) Level-3 0.9 23 × 10 58
0.254 mm (10 mil) 35 × 15
<QR Code: Model-2>
Resolution Error Correction PCS Size (mm) No. of Character
0.212 mm (8.4 mil) M 0.9 5 × 5 44
0.381 mm (15 mil) 11 × 11
<Data Matrix>
Resolution Model PCS Size (mm) No. of Character
0.212 mm (8.4 mil) ECC200 0.9 4 × 4 40
0.254 mm (10 mil) 6 × 6
* The size is outline dimensions excluding the quiet zones.

OPH-5000i
1st
19
8.2 Scan Area and Depth of Field
The scan area is the depth of field range, measured from the front edge of the scanner, swept
over the entire scan arc.
100 200 300
50 150 250
[単位：mm]
18
Figure 5: Scan Area and Depth of Field
Resolution
0127mm
Resolution
0
254
mm
Resolution
0
508
mm
Resolution
0
2mm
Resolution
0
33
mm
Resolution
01
69
mm
Resolution
0
2
54
mm
Resolution
0
2
12
mm
Resolution
0
381
mm
Resolution
0
2
54
mm
[Unit: mm]

OPH-5000i
1st
20
8.3 Printed Contrast Signal (PCS)
0.2 or higher
<Conditions>
MRD : 32% and higher
(70% or higher reflectivity of space and quiet zone)
Distance : 125mm from the front edge of the scanner
Barcode Sample : UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.3)
MRD = Minimum reflectance of white bar - Maximum reflectance of black bar
8.4 Minimum Resolution
1D Code : 0.1 mm (3.9 mil) Code 39 specified in Chapter 8.1
GS1-Databar : 0.169 mm (6.7 mil) GS1 Databar Limited specified in Chapter 8.1
Stacked Code : 0.169 mm (6.7 mil) PDF417, GS1 Databar Limited Composite specified in Chapter 8.1
2D Code : 0.169 mm (6.7 mil) QR Code, Data Matrix specified in Chapter 8.1
<Conditions>
Barcode Sample : The above codes specified in Chapter 8.1
Distance : 95 mm from the front edge of the scanner
Angle : α= 0°, β=＋15°, γ= 0°
Curvature : R = ∞
8.5 Barcode Width
Code 39 with width of 100 mm and resolution of 0.2 mm can be read
<Conditions>
Barcode Sample : 0.20 mm Code 39 / PCS 0.9 specified in Chapter 8.1
Distance : 155 mm from the front edge of the scanner
Angle : α= 0°, β=＋15°, γ= 0°
Curvature : R = ∞
Figure 6: Wide Barcode
PCS = Reflectance of white space – Reflectance of black bar
Reflectance of white space