Orava EB-160A User manual

Keep these instructions for future use
Electric heated overblanket
EB-160A
Instruction manual EN
EB-160A

2EN
Intended use of the device
The device, comprising a flexible part with a heating element and
all other current-carrying parts, is intended exclusively to create the
thermal comfort of the human body in the home environment, to the
extent specified by technical and operational parameters and functions,
safety and user instructions and external effects of the operating
environment.
Such an electrical appliance may be:
- blanket - is designed to warm and cover the user‘s body
- pad - is designed for heating and use under the user‘s body
- pillow - is designed to heat a part of the human body
- quilt - is a quilted blanket intended for use without further covering of
the user
- mattress - is an appliance that contains an upholstered flexible part
and which is designed to heat the user‘s bed
This appliance is not intended for medical use in hospitals and other
healthcare facilities. ORAVA electrical appliances are manufactured
according to the knowledge of the current state of technology and
recognized safety and technical rules. Nevertheless, incorrect and
unprofessional use or use contrary to the intended purpose may create
a risk of injury or endanger the life of the user or a third party, resp.
damage to equipment and other property.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for
safe, correct and economical operation of the electrical equipment. Its
compliance helps the user avoid risks, increase reliability and product
life.
• In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept
of electrical equipment in the strict sense of the word will include the
following categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending machines.

3EN
1.1 General safety instructions
• Before operating the unit, we recommend that you carefully read the
instruction manual and operate the equipment in accordance with the
instructions!
• The safety instructions and warnings in this manual do not cover all
the possible conditions and situations that may arise when using
the device. The user must understand that a factor that cannot be
incorporated into any of the products is personal responsibility and
caution. These factors must therefore be ensured by users serving this
device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
• Keep the instruction manual as close to the device as possible
throughout its service life. Always keep the instruction manual together
with the appliance for future use and use by new users.
• Use the appliance only for the intended purpose and in the manner
specified by the manufacturer.
• The appliance is intended for home and similar indoor use without
special focus.
• This appliance is intended, in addition to domestic use, for the following
uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside
environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance
with the basic characteristics set out.

4EN
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence
of water vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching
dangerous parts by hand and non-waterproof)
• This degree of protection is not indicated on the product and on the
technical parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this
information is then displayed on the label of the appliance or in the
technical data of the operating instructions.
• Other characteristics of the domestic operating environment
(mechanical stress - vibrations and vibrations, occurrence of plant,
animals, weather effects ...) are negligible in terms of effect on the
correct and safe use of electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time,
make sure that the voltage on the appliance label corresponds to that of
the household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50
Hz.
• The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
• Electrical protection class I equipment is equipped with a protection
against electric shock by means of protective earthing of inanimate
parts, which can become dangerous when the device is malfunctioning.
Always connect such devices to properly installed mains sockets that
are equipped with earthing conductors and have a properly grounded
earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by
double insulation or by enhanced insulation of hazardous live electrical
parts. Device of protection class II it must not be equipped with means
to connect protective earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small
safe voltage source (battery or accumulator) and does not present any
danger to the user from electrical shock.
• In order to provide increased safety against the risk of electric
shock due to the use of electrical appliances by laypersons, it is
recommended to install the power supply circuit for sockets with a rated
current not exceeding 20 A RCD with a rated operating current not
exceeding 30 mA.
To ensure the safety and correctness of the electrical installation,
consult a qualified electrician.

5EN
• Only use a power cord with a plug (mains lead) supplied with the device
and compatible with a wall socket. Using another cable may result in
fire or electric shock.
• Always connect an electrical appliance to an easily accessible mains
socket. In the event of an operating fault, the appliance must be
switched off as soon as possible and disconnected from mains supply.
• The power cord and mains plug must always be easily accessible for
safe disconnection of the electrical appliance from the power supply.
• Do not pull off the power cord by pulling the cable. Disconnect the
power cord by pulling the plug behind the power cord plug.
• If you use an extension cord, make sure that the total rated power of
all devices connected to the extension cord does not exceed the max.
current load on the extension cable.
• If you need to use an extension cord or power supply block, make sure
that the extension cord or power pack is plugged into a power socket,
and not to another extension cord or power supply. The extension
power cord or power supply block must be designed for grounded
electrical plugs and connected to a properly grounded electrical socket.
• The power plug of the appliance must be compatible with the mains
socket. Never use any adapters or modify the socket in any other way.
Do not use inappropriate or damaged drawers!
• To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not
use adapters that do not have a grounding element or remove the
grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord of the
appliance to mechanical stress or external heat sources. Damage to the
power cord may result in electric shock.
• When the power cord is damaged, disconnect the appliance from the
mains and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer,
its service department or a similarly qualified person to avoid the risk of
electric shock.
• Regularly check and maintain the electrical appliance as well as the
power cord and power socket. Disconnect the power plug regularly and
clean it if necessary. Pollution by dust or other substances may cause
disruption of the insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress of water
into the appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water,
disconnect it immediately from the mains. If the appliance is plugged
into a mains socket and if possible, turn off the power circuit before
attempting
unplug the power. If you are pulling wet wires from a live power source,
be very careful.
• If the electrical equipment is installed (connecting) the protective covers
are dismantled, the electrical parts must not be accessible to the user
when the installation is finished.