Orava Tenera User manual

Ceramic hair iron
Tenera
Tenera
Instruction manual EN

2EN
Intended use of the device
The device is intended exclusively for treatment (ironing, straightening) of dry and
clean hair , to the extent determined by technical and operating parameters and
functions, safety and user instructions and external influences of the operating
environment.
ORAVA electrical appliances are manufactured according to state-of-the-art
knowledge and recognized safety regulations. Nevertheless, improper or improper
use or improper use may result in injury or endangerment to the life of the user or
a third party, or to a third party. damage to equipment and other property.
1. GENERAL SAFETY INSTRUCTIONS AND
WARNINGS
• This document contains important safety instructions and warnings for safe,
correct and economical operation of the electrical equipment. Its compliance
helps the user avoid risks, increase reliability and product life.
• In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept of
electrical equipment in the strict sense of the word will include the following
categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending machines.
1.1 General safety instructions
• Before operating the unit, we recommend that you carefully read the instruction
manual and operate the equipment in accordance with the instructions!
• The safety instructions and warnings in this manual do not cover all the
possible conditions and situations that may arise when using the device. The
user must understand that a factor that cannot be incorporated into any of the
products is personal responsibility and caution. These factors must therefore
be ensured by users serving this device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
• Keep the instruction manual as close to the device as possible throughout its
service life. Always keep the instruction manual together with the appliance for
future use and use by new users.

3EN
• Use the appliance only for the intended purpose and in the manner specified
by the manufacturer.
• The appliance is intended for home and similar indoor use without special
focus.
• This appliance is intended, in addition to domestic use, for the following uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance with
the basic characteristics set out.
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water
vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous parts
by hand and non-waterproof)
• This degree of protection is not indicated on the product and on the technical
parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this information
is then displayed on the label of the appliance or in the technical data of the
operating instructions.
• Other characteristics of the domestic operating environment (mechanical
stress - vibrations and vibrations, occurrence of plant, animals, weather effects
...) are negligible in terms of effect on the correct and safe use of electrical
equipment.

4EN
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make
sure that the voltage on the appliance label corresponds to that of the
household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
• Electrical protection class I equipment is equipped with a protection against
electric shock by means of protective earthing of inanimate parts, which can
become dangerous when the device is malfunctioning. Always connect such
devices to properly installed mains sockets that are equipped with earthing
conductors and have a properly grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by double
insulation or by enhanced insulation of hazardous live electrical parts. Device
of protection class II it must not be equipped with means to connect protective
earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small safe
voltage source (battery or accumulator) and does not present any danger to
the user from electrical shock.
• In order to provide increased safety against the risk of electric shock due to
the use of electrical appliances by laypersons, it is recommended to install the
power supply circuit for sockets with a rated current not exceeding 20 A RCD
with a rated operating current not exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a
qualified electrician.
• Only use a power cord with a plug (mains lead) supplied with the device and
compatible with a wall socket. Using another cable may result in fire or electric
shock.
• Always connect an electrical appliance to an easily accessible mains socket. In
the event of an operating fault, the appliance must be switched off as soon as
possible and disconnected from mains supply.
• The power cord and mains plug must always be easily accessible for safe
disconnection of the electrical appliance from the power supply.
• Do not pull off the power cord by pulling the cable. Disconnect the power cord
by pulling the plug behind the power cord plug.
• If you use an extension cord, make sure that the total rated power of all
devices connected to the extension cord does not exceed the max. current
load on the extension cable.
• If you need to use an extension cord or power supply block, make sure that
the extension cord or power pack is plugged into a power socket, and not to
another extension cord or power supply. The extension power cord or power
supply block must be designed for grounded electrical plugs and connected to
a properly grounded electrical socket.
• The power plug of the appliance must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
inappropriate or damaged drawers!
• To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not use
adapters that do not have a grounding element or remove the grounding
element from the plug or adapter.

5EN
• Do not bend, crush or otherwise expose the power cord of the appliance to
mechanical stress or external heat sources. Damage to the power cord may
result in electric shock.
• When the power cord is damaged, disconnect the appliance from the mains
and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer, its
service department or a similarly qualified person to avoid the risk of electric
shock.
• Regularly check and maintain the electrical appliance as well as the power
cord and power socket. Disconnect the power plug regularly and clean it if
necessary. Pollution by dust or other substances may cause disruption of the
insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress of water into the
appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water, disconnect it
immediately from the mains. If the appliance is plugged into a mains socket
and if possible, turn off the power circuit before attempting
unplug the power. If you are pulling wet wires from a live power source, be very
careful.
• If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is finished.
1.4 Safety of persons
• This appliance is intended for use and operation by persons without
electrotechnical qualification - lay people, according to the instructions
specified by the manufacturer.
• Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory inspection
of the equipment, and user cleaning and maintenance.
• This appliance can be used by children under the age of 8 and persons with
reduced physical, sensory or mental capabilities or lack of experience or
knowledge when supervised or instructed to use the appliance safely and
understand the dangers involved.
• Children may not play with the appliance.
• Cleaning and maintenance for users may not be performed by children
unattended.
• Always keep the appliance out of reach of children during use and operation.
Be sure to download the appliance even for a freely accessible power cord.
• Always be careful when operating the electric appliance! Do not use an electric
appliance if you are overly tired, under the influence of medication or narcotic
drugs that reduce attention and focus.
• Inattention during operation may result in serious injury.

6EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance in
the recommended way. Do not use solvents or harsh cleaners for cleaning.
Pollution and visible stains from finger contact, respectively. The hands can
be cleaned using detergent detergents specially designed to clean household
appliances.
• If you do not use the appliance, clean it or disconnect the appliance from the
power supply when the appliance is faulty.
• Electrical appliances that are cleaned after use and are not intended to be
completely or partly immersed in water or other liquid, protect against the
effects of dripping and / or splashing water and before immersion.
• Electric household appliances, like all other technical devices, are subject to
the surrounding environment and natural wear. Since the legal framework of
regular maintenance is not laid down for lay-in electrical household appliances,
the manufacturer recommends that the user have the appliance checked and
cleaned at least once a year by a specialist workshop.
• By doing so, it is possible to achieve safety, operational reliability and
increased service life.
• Do not disassemble the electric appliance! The appliance works with a
dangerous voltage. For this reason, always switch off the appliance and
disconnect it from the mains supply during user maintenance. In the event of a
fault, please have the repair serviced by an authorized service center.
• Before calling a service:
1. Verify that you are unable to remedy the malfunction yourself according to
the procedure described in the chapter „Remedy of operating faults“.
2. Turn the appliance off and on to make sure the fault reappears.
3. If the malfunction of the appliance still persists after these operations, call
the nearest specialist service center.
• Never repair the electric appliance yourself!
• Unauthorized, unqualified and improper use of an electric appliance may result
in electric shock or other serious injury.
• Only carry out the warranty or post-warranty repair of an electrical appliance to
an authorized qualified person (*).
(*) Competent qualified expert: the sales department of the manufacturer or
importer or the person qualified and authorized to carry out this type of activity
with the ability to avoid all risks.

7EN
2. Special Safety Instructions. Read carefully!
• Electrical equipment is designed and manufactured in such a way as to allow
for safe operation and use by persons without a professional qualification.
Despite all the measures taken by the manufacturer to ensure safe use,
handling and use, it carries with it some residual risks and associated potential
hazards.
• The following symbols and their meanings have been used on the device and
in the accompanying documentation to warn of possible hazards:
This symbol alerts users that the device is operating with dangerous
electrical voltage. Do not remove protective covers on the device.
Failure to observe the safety instructions during use and operation of
the device may result in:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users to the following: Risk of serious injury or
life threatening when not following the safety instructions when using
and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol alerts users that if not following safety instructions while
using and operating the device:
Danger of burning from hot surfaces!
This symbol alerts users to the following: Failure to observe the
safety instructions when using and operating the unit is in danger:
Danger of fire!
This symbol alerts users to the following:
Prohibition of use of the device in a bath or shower!
This symbol means that the product is made with a double insulation
between hazardous live parts (parts with dangerous voltage from the
mains) and parts that are accessible in normal use.
Transportation/Carriage
• When transporting be careful when moving, to avoid overturning and dropping
the device.
• Do not carry the appliance by electric cord.
There is a risk of serious injury!
There is a risk of damage to the device!
Unpacking/Package
• Unpack the equipment and accessories before putting it into service and
remove any parts of packaging waste, labels and
tags. Store the packaging in a safe place or keep it out of the reach of children
and inappropriate persons.
There is a risk of serious injury!
There is a risk of choking

8EN
Check/Commissioning
• We recommend performing both initial and subsequent regular product
inspections. Use the device only with accessories and spare parts supplied
and approved by the manufacturer.
• Never use the appliance if it is incomplete, damaged, or if parts or accessories
(eg due to fall) have been damaged during use.
There is a risk of electric shock! There is a risk of serious injury!
• Never clean the device (body with electrical parts) and the power cord with the
plug in a way that could cause the liquid to flow into the device.
• Clean these parts with a damp cloth only and wipe dry or let it dry.
• Only clean the appliance if it is switched off and disconnected from the mains.
Keep the device clean and dry.
Operation/Using/Supervision
Warning!
• Use the appliance only in such a way that there is no danger to
the health of children, vulnerable persons and animals, there are
no risks of damage to the equipment and other material damage.
• Use the device to trim clean, dry, and free hair. Dry your hair first
with a towel.
• Do not use the appliance to trim synthetic hair.
• Do not use hair care equipment to treat animal hair. Also, take
care with respect to possible parasite transmissions and keep
the device clean and hygienic. After each use, always clean the
device thoroughly.
There is a risk of transmission of parasites from animals to
humans and persons!
• Always keep your device under control during use and operation!
• This device is not intended to be operated by a programmer, an
external time switch or a remote control, because there is a risk
of fire when covered or incorrectly positioned.
• Do not use the appliance near easily flammable materials and
objects, curtains, curtains, decorative fabrics, and the like. There
is a danger of fire!
• Make sure that the main switch is set to „OFF“ /“0“ position before
each connection to the mains.
• Do not switch the device on or off by plugging in or pulling out the
power cord from the AC socket.
• Always connect the appliance to mains power supply for normal
use, then turn on the main power switch. When you have finished
using the device, turn off the main switch and then pull out the
power cord from the wall socket.

9EN
• Do not leave the device plugged into a power socket unattended.
• Do not use the device if the main power switch does not work on
the device.
• The appliance must be kept dry.
• Do not use the appliance where there is dripping or splashing
water.
• Do not use the appliance in the vicinity of bathtubs, showers,
washbasins or other containers containing water, including the
pool. If the appliance falls into the water, do not remove it. First,
pull the power cord plug out of the mains socket and then take
the appliance from the water. In such cases, take the device
for inspection to a specialist service to check that it is safe and
working properly.
• Do not attach the appliance and the power cord to the electric
socket while your hands, power cord or equipment is wet or
standing on a wet floor. Always dry hands, power cord and
equipment with a dry cloth.
There is a risk of electrical short circuit!
There is a risk of electric shock!
• If you use the appliance in the bathroom, disconnect the power
cord plug from the mains after use, since the proximity of water
in the environment poses a risk even when the appliance is
switched off.
• If you use the appliance in bathroom, the device must not be
freely reachable by people using a bath or shower. There is a risk
of electric shock!
• Do not use the appliance in potentially explosive atmospheres in
the presence of flammable substances and vapors, mist or dust.
• Do not use the device near sources of excessive heat and open
flame.
There is a risk of explosion or fire!
• Do not use flammable substances such as hairspray, hair gel, etc.
There is a risk of ignition of combustible substance!
• Do not cover the appliance even partly. Do not place objects on
the device, do not allow foreign bodies to enter the holes. Do not
place the appliance on easily flammable materials (paper, fabrics,
fabrics ...) or lightly inflammable objects.
• Do not cover the openings for air flow.
There is a danger of fire!

10EN
Warning!
• Do not use or place the appliance in a place where children
may reach freely. The appliance may shif on children and cause
serious injury to them.
• Mechanical damage (breakage or breakage of parts and covers)
of the device can cause serious injury. Do not use the damage
device.
There is a risk of serious injury!
There is a risk of damage to equipment or other property
damage!
Warning!
• The appliance must not be left unattended when connected to the
mains! The device is under a dangerous voltage when connected
to a power supply.
There is a risk of electric shock!
• The electrical socket and power cord must remain easily
accessible for safe disconnection of the appliance from the power
supply.
• The device contains parts that are very hot during operation.
• Do not touch the hot surface of the device.
• Only touch the handles. Parts and accessories of the device that
are warming up during operation will remain warm for a certain
time even after power is turned off and disconnected from the
mains.
• Do not touch the equipment of any part of the body (especially
the skin of the hands, face, ears, neck, vertex, ...) during normal
operation of the device.
• Use the device in a safe way to avoid hair burns or skin.
There is a risk of burning from a hot surface!
Attention!
• After switching off the machine, the ironing area remains hot for
some time. Before any further handling of the device, always wait
for the ironing surface to cool completely.
• The electrical socket and power cord must remain easily
accessible for safe disconnection of the appliance from the power
supply.

11EN
Warning!
• The appliance must not be left unattended when connected to
mains.
• Never leave your device unattended and freely accessible
and do not hang it with a freely-hanging power cord. Children,
inappropriate persons or animals could pull out the device for the
power cord.
There is a risk of serious injury!
• Do not store the appliance with a wrapped power cord around
the ironing surface. Fold the power cord „freely“ in the way it was
folded in the original packaging by the manufacturer.
• Never overload the equipment beyond the limits specified by the
technical specifications!
• Observe the operating mode of the device (operating time and
break time) according to the operation and instruction manual.
• If you notice any unusual occurrences (sounds, odors, smoke,
etc.) during use of the device, switch off the device immediately
and disconnect it from the power supply. Have the appliance
checked by a specialized sevice centre.
• If any safety part / component (mechanical, electrical, electronic)
is part of the unit, never disable this part / component! If the
safety part / component is damaged or not working, do not use
the device!
• Children under 3 years of age must be prevented from accessing
the appliance unless they are under the supervision.
• Children between 3 years and under 8 years of age may not
connect the appliance to a power outlet, nor regulate or clean it or
service users.
WARNING!
• Some parts of this product may become very hot and may cause
burns. Take special care when vulnerable persons or children are
present.
• Never underestimate the potential hazards and take extreme
caution !!!

12EN
Characteristics
• The appliance is designed for ironing (straightening) hair using high
temperature ceramic plates.
• New generation ceramic plates
• Instant heating to high temperature - ready in 15 seconds
• Electronic temperature setting on LED - 150 - 230 °C
• ON/OFF button
• High quality ceramic plates - smooth gliding
• Automatic shutdown after 1 hour
• Long power cord in swivel joint
• Thermal lock
Preparation
Power supply
The device operates on AC 230 V, 50 Hz from the mains.
Before using the machine, you must connect the machine to a power outlet using
the power cord.

13EN
Parts descriptions
1 Straightening ceramic plates
2 LED indicators (5 indicators are displayed sequentially during warm-up,
the corresponding number of indicators is lit when the temperature is
reached)
3 Lock switch
4 Temperature setting buttons + and -
5 On/Off switch
6 Main cord with 360° swivel
4
2
1 3 5 6

14EN
Operation
1 Make sure that the power cord is not wrapped around the machine before
commissioning.
2 Connect the power cord to a 230 V/50 Hz electrical outlet.
3 Turn on the device by pressing and holding the ON/OFF switch for about 2
seconds.
4 Use the +/- buttons to set the desired temperature setting and place the device
on a heat-resistant surface until it is warm.
During warm-up, 0 to 5 indicators will blink on the temperature LED until the
desired temperature is reached.
When the device reaches the desired temperature, the flashing stops and
only the appropriate number of indicators (1 - 5) are lit according to the set
temperature.
5 Turbo mode
Activation: Pressing the “+” button for approx. 2 seconds increases the
temperature to a maximum of 230 ° C.
Deactivation: Press “-” to decrease the temperature as in normal mode.
Thermal lock:
To activate: Press the ON/OFF switch twice.
All buttons will be locked and the lock symbol will be displayed. Deactivation:
Press the ON/OFF switch twice again. All buttons are unlocked and the lock
symbol disappears.
6 After the desired temperature has been set, the device is ready for use in
about 15 seconds, when the temperature is reached and the corresponding
indicators remain lit. Use the device for up to 20 minutes at a time.
Then turn off the device for at least 15 minutes.
Straightening (ironing) of hair
The hair must be washed, thoroughly dried and combed before treatment. Do not
use any hair care products.
You can only use a special spray to protect your hair from burning.
1 Plug the iron into a power outlet and turn it on by pressing and holding the ON/
OFF switch for about 2 seconds. The LED indicators will flash.
2 Adjust the temperature using the +/- buttons.
All LED indicators will flash sequentially and when the desired temperature is
reached, the appropriate number of indicators will light and the iron will beep.
3 Comb the hair thoroughly.
4 Open the plates
5 Place a wide strand of hair between the ceramic plates
If you have thick hair, divide it into smaller strands using hair clips. Gently
squeeze the plates, wait for 2-3 seconds and slowly and evenly move the
device from the roots to the ends of your hair. Depending on the length of the
hair, however, this must not exceed 5 to 8 seconds, maximum 10 seconds.
.

15EN
6 Before adjusting the rest of the hair, try the iron on a small part of the hair and
then adjust the temperature setting up or down as necessary.
If you find that you need a higher temperature setting when straightening your
hair, simply adjust the temperature to a higher temperature.
If you find that your hair needs a lower temperature, lower it.
Since the iron is already hot, it may take a few minutes to cool down. Repeat
for other hair strands as needed.
7 To create ripples, turn the wrist to turn the iron towards or away from the head
while pulling the iron along the strand of hair.
8 Repeat the process with all hair parts, working with the lower layers first, then
continue with the top and side.
9 When you have finished making adjustments, turn the unit off by pressing the
ON/OFF switch for about 2 seconds, and then unplug the power cord from the
wall outlet.
10 Place the machine on a heat-resistant surface until it cools down.
11 Adjust the hair with the desired product as necessary.
Automatic safety shutdown
After about one hour of operation, the iron switches off automatically for thermal
protection.
Activate the iron again by pressing the ON/OFF switch.
Hinge lock
This iron has a hinged hinge lock that makes it easy to store the iron.
To lock the iron, simply close the jaws and set the lock switch (3) to the locked
position.
To unlock, slide the lock switch (3) to the unlock position.

16EN
Cleaning and maintenance
Regular, long-term cleaning is required to ensure proper and long-term
operation.
• The equipment has been carefully inspected and pre-shipped and packaged.
• Clean the machine after each use with a cleaning cloth and remove any hair
that has become trapped.
• Unplug the machine and allow it to cool before cleaning.
• Wipe the machine with a soft, clean cloth.
• Store the device in a suitable case.
Warning!
Never immerse the device in water or any other liquid during cleaning! Clean the
machine with a dry cloth slightly moistened with water.
Do not use any abrasive cleaning agents or solvents such as alcohol, benzine, or
thinner.
After cleaning, wind the power cord loosely and store the machine in a suitable
place.
.

17EN
Technical specifications
Power supply: 230 V / 50 Hz
Power: 50 W
Operating temperature: 150 - 230 ° C
Dimensions (W x D x H): 3.7 x 3.7 x 29 cm
Weight: 0.3 kg
Subject to change!

18EN
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
The symbol on the product or on its packaging indicates that this product does not belong
to household waste. It is necessary to take it to a collection point for electrical recycling
and electronic equipment.
By ensuring proper disposal of this product, you will help prevent negative consequences
to the environment and human health that would otherwise be caused by inappropriate
disposal of this product. For more detailed information about recycling of this product,
please contact your local authority, your household waste disposal service or the shop
where you purchased the product.
This product meets all the essential requirements of the EU directives that apply to it.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika