ORBILOC DogDual User manual

DOG DUAL
USER MANUAL
THE SAFETY LIGHT
MADE IN DENMARK
Register for your 3-year warranty
at www.orbiloc.com/warranty
UK

INTRODUCTION .................04
BASIC PRINCIPLES ...............06
WARRANTY .....................07
GETTING STARTED. . . . . . . . . . . . . . . 08
ON / OFF / STEADY / FLASH ......08
CHANGE MOUNT ................09
ORBILOC ACCESSORIES ..........10
ORBILOC SERVICE KIT............10
CHANGE BATTERY AND MAINTAIN. 11
ORBILOC MOUNTS. . . . . . . . . . . . . . . 12
QUICK MOUNT ADJUSTABLE .....14
ORBILOC BUCKLE MOUNT .......15
ORBILOC VELCRO STRAP .........15
ORBILOC RUBBER STRAP.........16
ORBILOC CARABINER MOUNT ....17
ORBILOC CLIP MOUNT ...........17
ORBILOC ARMBAND .............18
ADDENDUM ....................19

© 2017 Orbiloc. All rights reserved.
The Orbiloc™ name and logo are
among the trademarks of Orbiloc,
registred in the U.S., EU, NO and CN.
Our three-year warranty applies to the
Orbiloc Dog Dual. Please visit:
www.orbiloc.com/warranty
To get the most out of your new high
quality Orbiloc Dog Dual Safety Light™,
please read the User Manual carefully.
Congratulations on your new
Orbiloc Dog Dual™
Safety Light

4
INTRODUCTION
Orbiloc Dog Dual
Orbiloc Dog Dual is a high quality LED
Safety Light designed to keep both you
and your dog safe.
The Orbiloc Dog Dual Safety Light
ensures that both of you are visible to
others when out and about in the dark,
drastically reducing the risk of being
involved in an accident or dangerous
situation.
Stay Safe and Visible
With Orbiloc Dog Dual, other road
users will be able to spot you from a
distance of up to ve kilometres, which
leaves them plenty of time to react.
BUCKLE
MOUNT (9)
VELCRO
STRAP (10)
EXTRA MOUNTS INCLUDED

5
LENS (1)
MODE SELECTOR
RING (2)
O-RING (3)
BATTERY
SHEET (4)
QUICK
MOUNT (5)
BATTERY PACK
2 x CR2032 (6)
BASE (7)
ADJUSTABLE
STRAP (8)

6
Please take care of your new Orbiloc
Dog Dual™ and accessories. Read the
specic recommendations for each
product in our User Manual, available at
www.orbiloc.com.
If the Orbiloc Dog Dual Light gets
muddy or exposed to sea water, please
rinse the outside of the Light with run-
ning water while turning the Mode
Selector Ring (2). Do not open or
disassemble while rinsing.
Remove the Battery Pack (6) for long-
term storage of the Light, and store the
batteries in a dry, well-ventilated area,
out of direct sunlight.
Please note that unless your Orbiloc
Dog Dual Light is modied or repaired
by Orbiloc, your warranty will become
invalid. This does not apply to original
Orbiloc replacement parts.
Orbiloc is not responsible for any injury
or damage, whether direct, indirect or
accidental, resulting from the use of its
Lights or Accessories.
BASIC PRINCIPLES

7
Orbiloc Dog Dual Lights are manufactu-
red to the highest standards of quality
and technology, which is why we oer
a three-year warranty – absolutely free!
Simply register your Orbiloc Dog Dual
within 30 days of purchase at:
www.orbiloc.com/warranty
Terms and conditions
The Orbiloc warranty does not aect
your statutory rights.
The warranty period applies to the
Orbiloc Dog Dual. Accessories are not
covered by the warranty. The warranty
of the Orbiloc Dog Dual is only valid
with the use of orginal Orbiloc replace-
ment parts. Use of other accessories and
replacement parts will make the warran-
ty of the Orbiloc Dog Dual invalid. Other
exclusions include normal wear and
tear, oxidation, modications or altera-
tions, incorrect storage, poor mainte-
nance, negligence, and using the Light
for purposes for which it is not designed.
Warranty matters are always handled
according to our current conditions of
warranty. See the full warranty terms
and conditions at:
www.orbiloc.com/warranty
WARRANTY

8
GETTING STARTED
Remove the Battery Sheet (4).
Tighten the Base (7) and you are ready to
use your Orbiloc Dog Dual.
ON / OFF / STEADY / FLASH
The Orbiloc Dog Dual is very user-friendly;
just turn the Mode Selector Ring (2) to the
left or right.
The triangle indicates the desired
function.
Flashing ( ) and Steady-on ( ) symbols
are found on the top of the Lens (1).

9
CHANGE MOUNT
Unscrew the Base (7) of the Orbiloc Dog
Dual Dual and remove the Orbiloc Mount.
Make sure that the Mode Selector Ring (2)
is clicked rmly onto the Lens (1). Please
note that the part of the Mode Selector
Ring (2) with the small magnet has to be
placed in one of the four semi-circles on
the Lens (1).
Place the new Orbiloc Mount in the desig-
nated guide pins on the Lens (1).
Make sure that the Battery Pack (6) is
placed with the +symbol facing down in
the Base (7) of the Orbiloc Dog Dual.
Screw the top parts and Base (7) of the
Orbiloc Dog Dual back together again.

10
ORBILOC ACCESSORIES
Get the most out of your Orbiloc
Safety Light with the Orbiloc vast variaty
of mounts, replacement parts and Orbiloc
Service Kit.
ORBILOC SERVICE KIT
The Orbiloc Service Kit makes maintaining
your Orbiloc Dog Dual quick and easy. The
Orbiloc Service Kit contains a Lithium Bat-
tery Pack (6) (2 x CR2032) and an O-ring (3)
lubricated with silicone.
The silicone lubrication helps ensure
the waterproofness of the light, and it is
therefore important to throughly lubricate
the new O-ring (3) before replacing the
old one.
Should your dog be in and out of water
often, the O-ring (3) should be lubricated
with silicone and the light should be rinsed
after each time (please refer to page 6).
Save the packaging of the O-ring (3) in
order to re-lubricate the O-ring (3) in the
excess silicone.
NOTE; The output and battery-lifetime of
the light can only be guaranteed with the
use of the orginal Orbiloc Lithium Battery
Pack (6).
NOTE; If using 2 single batteries make sure
that both batteries with the +symbol is
facing down. Sometimes it is also necessary
to pull the middle part of the battery spring
a bit towards yourself.