Congratulations!
This user guide will help take you through the intial set up and
automatic watches require between 600 and 800 turns per day
(TPD), whether worn on your wrist or turning on your watch
winder.
12 3 4
12 3 4
Turning Power On
1. Carefully unwrap the protective packaging.
2. Remove the key that is taped to the glass door.
3. Unlock and open the doors.
4. Select the programmable setting on each module. (Details below)
5. Mount watch on cushion and slide cushion into cup.
6. Slide the cup back on to the drive shaft making sure it is fully engaged.
7. Turn the power on using master power switch(es) (o/-).
Getting Started - Rotorwind 10/15 Minute Switch
Avanti 48 Watchwinder
Getting Started - Programmable
-
15
10
A program switch allows you to select one of two winding
cycles: 8 minute (standard program) or 12 minute (extended
program). The winding cycle begins every 8 or 12 minutes
based on the program selected. Many watches that wind in
both directions stay fully wound on the factory preset 8 min.
setting.
To set the extended program, remove the mounting cup to
reveal the program switch opening. Insert a small object
(screwdriver, pencil, etc.) into the opening and slide the switch
to the 12 minute setting.
The factory preset is the 8 minute setting.
Mounting Watch on Cushion
1. With the bracelet or strap of the watch closed, squeeze and slide the
cushion through the watch. The back of the watch should rest against the
Orbita logo and the strap should lie on the flat portion of the cushion .
123 4
12
8
Visit our watch database: www.orbita.comVisit our watch database: www.orbita.com
OPERATINGOPERATING
MODEMODE
ClockwiseClockwise
CounterclockwiseCounterclockwise
ReversingReversing
Pause IntervalsPause Intervals
11223344112233441122334411223344
11223344
11223344112233441122334411223344
11223344
11223344112233441122334411223344
650
TPDTPD
31 minutes 25 minutes 21 minutes 12 minutes
15 minutes15 minutes
800
TPDTPD
950
TPDTPD
1600
TPDTPD
1300
TPD
1300
TPD
Programming Settings (TPD = Turns Per Day)
