1. Avanti 3, 4 or 6 Watchwinder
2. Key (1)
3. Cup Assembly (3, 4, 6)
4. Standard Cushion (3, 4, 6)
5. AC Adapter (PN2302: 6-Volt)
6. Warranty Registration
7. Instruction Booklet
Included In This Box
Setting the DIP Switches
Programmable Watch Winders
Getting Started
Congratulations!
This user guide will help take you though the initial set up and programming
of your new watch winder. A majority of fine automatic watches require
between 600 and 800 turns per day (TPD), whether worn on your wrist or
turning on your watch winder. For convenience, Orbita programmable watch
winders are preset at the factory for 800 TPD with clockwise rotation. How-
ever, many automatic watches wind both directions. Alternate settings are
available and can be adjusted to accommodate any type of modern auto-
matic wristwatch.
Each winding head can be set for a different
watch. Programming is handled by four DIP
switches located just behind the cup assembly.
To learn what setting to use with your watch,
visit our exclusive Watch Database on our
website. There you can find the correct setting
and use the table below to set the DIP switches.
Visit our watch database: www.orbita.comVisit our watch database: www.orbita.com
OPERATINGOPERATING
MODEMODE
ClockwiseClockwise
CounterclockwiseCounterclockwise
ReversingReversing
Pause IntervalsPause Intervals
11223344112233441122334411223344
11223344
11223344112233441122334411223344
11223344
11223344112233441122334411223344
650
TPDTPD
31 minutes 25 minutes 21 minutes 12 minutes
15 minutes15 minutes
800
TPDTPD
950
TPDTPD
1600
TPDTPD
1300
TPD
1300
TPD
12 3 4
Programming Settings (TPD = Turns Per Day)
Mounting Watch on Cushion
1. With the bracelet or strap of the watch closed, squeeze and slide the
cushion through the watch. The back of the watch should rest against the
Orbita logo and the strap should lie on the flat portion of the cushion.
1. Carefully unwrap the protective packaging.
2. Remove the key that is taped to the glass door.
3. Unlock and open the doors.
4. Remove cushions and confirm each module is on by pressing the o/- to the
right (-).
5. Slide the cushions back into the cup assembly.
6. Plug the adapter into the A/C port located in the rear of the unit.
Getting Started
