Orbita VOYAGER User manual
INSTRUCTION GUIDE
VOYAGER Watchwinder
1205 Culbreth Drive
Wilmington, NC 28405
www.orbita.com
Orbita Warranty
Give Us A Shout!
Need a different size cushion? We have smaller and larger size cushions
available. Call our toll free 800 number (below) and we will be happy to
send you one, free of charge.
Online
www.orbita.com
Customer Support
Made in USA
Email
Phone / Fax
800-800-4436 / 910-256-5300
Congratulations on your purchase. Your ORBITA watchwinder should provide
you with many years of trouble-free service. It comes complete with a 2-year
warranty for any defects in materials and/or workmanship. In order to provide
you with proper support, and to keep you updated with information on perfor-
mance enhancements, accessories and new product announcements, we ask
that you take a minute to fill out the registration card included with your
ORBITA watchwinder. Be assured that we will not furnish your name, address
or any other information you provide to us to any "third" parties.
EXTENDED WARRANTY PURCHASE
There is always the possibility that any electro-mechanical device may fail due
to unforeseen circumstances. ORBITA offers an optional extended warranty
providing for an additional 3 year coverage period to insure against such
contingencies. If you would like to purchase this option, please fill out the
Extended Warranty card included with your watchwinder. You may fax or
simply mail the paper work directly to us.
1. Voyager Watchwinder
2. Black Leather Travel Roll
3. Cylinder Assembly
4. Standard Cushion
5. AC Adapter
6. Warranty Registration
7. Instruction Book
Turning Power On
1. Remove the mounting cylinder and cushion.
2. Mount watch on cushion and slide cushion into cylinder.
3. Place the cylinder on top of the support rollers.
4. Select LO or HI setting. (Details on Next Page)
5. Insert batteries or plug in wall adapter.
6. Turn the power on using ON/OFF toggle switch.
Included In This Box
Operating the VOYAGER Watchwinder
Battery Installation
Mounting Watch on Cushion
Voyager Travel Watchwinder
Getting Started
1. With the bracelet or strap of the watch closed, squeeze and slide the
cushion through the watch. The back of the watch should rest against the
Orbita logo and the strap should lie on the flat portion of the cushion .
After mounting the watch, turn the winder on using the ON/OFF rocker switch.
Then position the cylinder on the two support rollers. The cylinder will rotate
clockwise for 1-minute and then rest for several minutes. That cycle will repeat
throughout the day and provide 800 turns per day (TPD). The programming
switch for this mode is indicated as “LO” on the programming switch (factory
setting). If more winding is required, the “HI” setting provides 1300 TPD. For
watches that only wind counterclockwise, simply lift the cylinder off the
support rollers and rotate the winder base around 180 degrees.
Congratulations!
The Voyager user guide will help take you though the initial set up and
programming of your new watchwinder. Compact and portable, the Voyager
watchwinder is built for travel. Equipped with a unique plastic-lined stainless
steel cylinder which serves both as a watch holder and a watchwinder. This
mounting system helps provide protection from rough handling as you travel.
The Voyager operates with an AC adapter or by use of 4 ‘AAA’ batteries. If
you travel with your winder, you can leave the AC adapter at home and use
battery power. The battery compartment is located on the under side of the
winder base. Press the tab to the left and pull compartment door free. *Impor-
tant note. The AC adapter should NOT be used when batteries are installed.
On the Move?
While on the move, you can safely carry both the winder
and a watch mounted in the cyliner inside the durable leather
travel roll.
Other Orbita Accessories manuals
