Orbita Smart lock User manual

Installation and User Manual
O R B I T A S M A R T L O C K
Thanks for purchasing our product, please read this manual carefully before using it
Please be sure to keep it for future reference
This manual is subject to change without any notice
Orbita shall not be held accountable for any accident and hazard arising from
incorrect user operations
Huizhou Orbita Technology Co., Ltd. (Marketing Center and Manufacturing Base in China )
Address: Orbita Technology Park, Changbu Village, Xinxu Town, Huiyang District, Huizhou,
Guangdong Province, P.R.C
Tel: [phone] [phone] [phone]
Fax: [phone]
Customer Service Hotline: [phone]
(Huizhou Orbita Technology Co., Ltd. reserves the right of final interpretation of this manual)

Product Overview
1. Material: high-end aluminum alloy
2. Biological semiconductor recognition fingerprint head
3. Support password unlock, 16-bit virtual password
4. Support card unlock
5. Support phone bluetooth app unlock
6. Supprt touch lock unlock
7. Support unlock remotely (permanent,Timed,one-time,Erase,
Custom,cyclic)
8. Support password remotely (permanent,Timed,one-time,Erase,
Custom,cyclic)
9. Unlocking record query
10.Company attendance function
1-1: Appearance
1-2: Features
1-3: Technical Specifications
1-4: Safety Precautions
1-5: Charging Safety
1-6: Precautions for Use
1：Product Overview
1
2
3
4
5
6
1 2
2-1: Product List
2-2: Installation Instructions
2-3: Installation Precautions
2-4: Installation Steps
2-5: Installation Diagrams
2：Product Installation
5
5
6
6
8
1: Add Bluetooth Administrator to the lock
2: eKey
3: User password
4: IC card
5: Fingerprint
6: Auto lock
7: Low power warning
8: Keypad lock out
9: Delete Bluetooth Administrator/Restore
to default factory setting
3：Operating Guide (operate with the app)
9
9
10
11
12
13
13
13
13
（As the product is constantly updated, the actual shape of
the product should be subject to the actual product.）
WEB management login 14
TABLE OF CONTENTS
1-1:Appearance
1-2:Features
front panel
Delete exit key
Enter
300mm
70mm
battery cover
25mm
sideback panel

High-end aluminum alloy
SUS304
40 to 110mm
Concealed super grace B mechanical cylinder
-20℃-+60℃
4.1BLE
Android 4.3/IOS7.0 above
4 AA Alkaline batteries
4.8V
35μA
＜200mA
≈1.5"
Capacitive touch button
Semiconductor (ZFM-10) < 0.001% < 1.0%
200 pieces
<0.001%
< 1.0%
APP send password
custom password
MIFARE M1 card
100 pieces
APP, Password, Fingerprint, Card, Mechanical key
Bluetooth
Panel material
Latch material
Door thickness
Cylinder
Operating temperature
Bluetooth standard
Support phone system
Working voltage
Low battery voltage alarm
Static current
Operating current
Unlock time
Button type
Fingerprint header type
Fingerprint capacity
False accept rate (FAR)
False reject rate (FRR)
Password type
Card type
Card capacity
Unlocking method
3 4
1. This product uses 4 AA alkaline dry batteries, please install the battery
according to the correct positive and negative electrodes.
2.When the voltage is lower than 4.8V, a low voltage alarm will sound every
time the lock is unlocked. Pay attention to replace the battery in time.
3. Do not short the positive and negative terminals of the batter y.
4.Please use the specified battery in this product, do not connect other
batteries modified by yourself.
5.Do not discard the replaced battery to avoid polluting the environment.
1-3: Technical Specifications 1-4: Safety Precautions
1. Keep the panel away from corrosive substances to avoid damage to the
surface coating.
2. Do not operate the product with wet hands to prevent liquids such as
water or drinks from entering the lock body.
3. Do not press the keypad with excessive force or with sharp objects.
4. Keep your fingers clean while using this product. To ensure normal use,
keep the fingerprint area clean as the surface may become smudged after
it is used for a period of time.
5. Do not pull the product with excessive force.
6. Do not use water, benzene or alcohol to clean the product; use a soft and
dry cloth to clean the lock body.
1-5: Charging Safety
1-6: Precautions for Use
1. Do not install batteries before the lock is installed on the door.
2.P lease carefully keep your password and change it on a regular base to
prevent leaks.
3.C harge or replace the batteries within one week after the battery
replacement alarm sounds.
4.M ake sure that the door is completely locked when leaving.
If you fail to open the door using the fingerprint, password or card, you can
use the mechanical key. Please keep the mechanical key properly.

2. Product Installation
Note：The door lock frame is larger than 40mm, and the door thickness can
be installed within the range of 40-50mm. If the door thickness is greater
than 50mm, a rectangular bar is required, and ask seller for it. Please check
if the list is complete after unpacking. If there is any missing, please ask the
seller in time.
2.3 Installation Precautions
2.4 Installation Steps
5 6
ORBITA
Master Cardx1
ORBITAORBITA
Secondary card X2
Other: User manuel*1,
Drilling mould*1, Warranty Card*1
2-1: Product List
Front panel Back panel Panel rubber mat
Mortise
Screw accessory kit
Key x2
2-2:Installation Instructions
Confirm the door handing (this smart lock can be used for left-hand outswing, left-
hand inswing, right-hand inswing and right-hand outswing doors)
Interior
Exterior
Please check the accessories before installing the door lock. After completing
the installation, you can continue to install.If your door hole needs to be
punched, please seek the help of a professional lock installer. Unauthorized
handling may result in unnecessary property damage.
Mortise installation
as shown
Screw
Adjust direction as
shown
Install square rod and
screw sleeve as shown
Important
Loosen the screw in the directional
rod hole to remove the handle and
adjust the direction. Adjust the
letter corresponding to the arrow
above the square hole according to
square rod
screw sleeve
Note: The square rod spring is aligned
with the opening in the panel knob
sleeve
Install the front panel
into the panel with the
hole open
Fixed front and rear panels
A:Connect the lock mortise and power plug
B:2 screws are connected to the front panel
through the rear panel
left-hand inswing left-hand outswing right-hand inswing right-hand outswing

Operating Guide
Operate with the app
2-4: Installation Diagrams
7 8
1.Front panel 2.Back panel 3.Mortise
4.Battery cover 5.Square pole 6.Screw
Download " orbita smart " from app store/google play etc.
software download
Install battery Install the battery cover
Lift the handle and the lock
latch out as normal Touch the panel with your finger,
the 5 and # keys flash as normal,
enter the “123456” initial
password to open the door.

3. 2. 1 Activate the lock by pressing"*" or touching the keypad to light it up
3. 2. 2 input passcode and press"#(pressing "*" will delete the digit last
entered during the input)
3. 2. 2. 1 if the passcode is correct, Lock with long "beep”
3. 2. 2. 2 if the passcode is incorrect,Lock with 4 times "beep"
3. 2. 2. 3 if the lock detects 5 consecutive trials of incorrect passcode
consists of more than 4 digits, Lock with 4 times "beep", after two times, the
system will be locked for 5 minutes.
3. 2. 2. 4 if the passcode has expired, voice prompt unauthorized passcode
3. 3 Modify user password on the lock
3. 3. 1input[*10#]
3. 3. 2 input original passcode
3. 3. 3 The lock with 2 times short "beep" if the password is correct.
2. 3 Delete an ekey
Notice: You Do not need to be near the lock to delete an ekey. You can delete
an ekey ANYWHERE, ANY Time but the deletion will only become effective
when the ekey user' s App is activated and connected to the internet. If the
deletion is carried out near the lock with Bluetooth on, the deletion become
effective immediately.
2. 3. 1 Activate the APP
2. 3. 2 select the lock
2. 3. 3 press [Password management]
2. 3. 4 select the ekey to be deleted
2. 3. 5 press [delete]
3 user password
3. 1 Generate a user password
Notice: You Do not need to be near the lock to generate a user passcode.
You can generate a user passcode ANYWHERE, ANYTIME.
3. 1. 1 Activate the APP
3. 1. 2 select the lock
3. 1. 3 press [generate passcode]
3. 1. 4 set the parameters of the passcode as prompted and press [generate]
3. 1. 5 when the passcode appears on the screen, press the sharing icon on
the upper right corner of the screen to share it with other users
3. 2 unlock with password
1. 8 press the"+ sign
1. 9 set the name of the lock and press [OK]
2 ekey
2. 1 send an ekey
Notice: You DO Not need to be near the lock to send an ekey. You can send
an ekey ANYWHERE, ANYTIMETHE recipient of the ekey must have an
Appaccount.
2. 1. 1 Activate the APP
2. 1. 2 select the lock
2. 1. 3 press [send ekey]
2. 1. 4 set the parameters of the ekey and press [send] to share it with other
registered users.
2. 2 unlock with ekey
Notice: please turn on the Bluetooth of your phone and keep it close to the
lock
2. 2. 1 "touch to open"
2. 2. 1. 1 Activate the APP
2. 2. 1. 2 Activate the lock by pressing"*" or touching the keypad to light it
up
2. 2. 1. 3 The lock said "dingdong", the message show the lock have been
unlocked.
2. 2. 2 unlock with APP
2. 2. 2. 1 Activate the APP
2. 2. 2. 2 select the lock
2. 2. 2. 3 press the lock icon on the APP
2. 2. 2. 4 prompt "unlocked
1 bluetooth Administrator to the lock
Warning once a Bluetooth Administrator is added to the lock, all previous
pass codes cards and fingerprints are invalidated. Notice: please turn on
the Bluetooth of your phone and keep it close to the lock.
1. 1 Download"orbita smart"appand get registered
1. 2 Activate the APP
1. 3 press the" "sign on the upper left corner of the screen
1. 4 press [add lock]
1. 5 select the right type of lock
1. 6 Activate the lock by pressing "*" or touching the keypad to light it up
1. 7 Click "Next”, the lock will make a "beep", the app will display the
name of the lock and a black "+"
910

Notice: please turn on the Bluetooth of your phone and keep it close to the
lock
4. 3. 1 Activate the APP
4. 3. 2 select the lock
4. 3. 3 press [IC cards]
4. 3. 4 select the IC card to be deleted
4. 3. 5 press [delete]
5 Fingerprint (available on selected models)
5. 1 Add fingerprint
Notice: please turn on the Bluetooth of your phone and keep it close to the
lock
5. 1. 1 Activate the APP
5. 1. 2 select the lock
5. 1. 3 press [fingerprints]
5. 1. 4 press the " "sign on the upper right corner of the screen
5. 1. 5 press [add Fingerprint]
5. 1. 6 set the parameters of the fingerprint and press [next]
5. 1. 7 press [start ]
5. 1. 8 The screen lights up, please put your finger on the fingerprint area
for several times, "Successful entry" when the lock with long "beep".
5. 2 unlock with fingerprint
5. 2. 1 press a finger on the fingerprint sensor
5. 2. 2 The lock with "beep" means "unlocked", or it will be 4 times "beep"
means "operation failed".
5. 3 Delete a fingerprint Notice: please turn on the Bluetooth of your
phone and keep it close to the lock 5. 3. 1 Activate the APP
5. 3. 2 select the lock
5. 3. 3 press [fingerprints] 5. 3. 4 select the fingerprint to be deleted
5. 3. 5 press [delete]
6 Auto lock
3. 3. 3. 1 input a new passcode
3. 3. 3. 2 Enter new password again with 2 times "beep".
3. 3. 3. 3 input [new passcode#]
3. 3. 3. 4 Lock with 2 times long "beep" (the lock with 4 "beep" if the
password is wrong when you enter in second time)
3.3.4 if the original passcode is correct
3.3.4.1Lock with 4 times "beep"
3.4 Delete a passcode
Notice: please turn on the Bluetooth of your phone and keep it close to the
lock
3. 4. 1 Activate the APP
3. 4. 2 select the lock
3. 4. 3 press [ passcodes] 3. 4. 4 select the pass code to be deleted
3. 4. 5 press [delete]
4 card(available on selected models)
4. 1 Add an IC card
Notice: please turn on the Bluetooth of your phone and keep it close to the
lock
4. 1. 1 Activate the APP
4. 1. 2 select the lock
4. 1. 3 press [IC cards] 4. 1. 4 press the " " sign on the upper right corner of
the screen
4. 1. 5 press [add IC card]
4. 1. 6 Then click "enter”
4. 1. 7 The screen lights up, 2 times short "beep”
4.1. 8 Long "beep" means swipe card success.
4. 2 unlock with IC card
4. 2. 1 place a card near the reader area on the keypad of the lock
4. 2. 1. 1 Lock with short "beep" and show "unlocked”
4. 2. 1. 2 Lock with 4 times "beep" in two times, it means the card invalid.
4. 2. 1. 3 Lock with 4 times "beep" in one time, it means operation failed.
4. 3 Delete an IC card
11 12

9.1 Delete Bluetooth Administrator on the APP
Notice: please turn on the Bluetooth of your phone and keep it
close to the lock.
9. 1. 1 Activate the APP
9. 1. 2 select the lock
9. 1. 3 press [settings]
9. 1. 4 press [delete]
9. 1. 5 input the account password and press [OK]
9. 1. 6 The lock with 2 times "beep" means delete success.
9. 2 Delete Bluetooth Administrator on the lock
9. 2. 1 long press the reset button
9. 2. 2 Lock with 2 times "beep”
9. 2. 3 It means "Administrator deleted successfully"
6. 1 5 seconds after the lock is unlocked, it automatically locks
and gives a voice prompt "(locked)"(except it is set to passage
mode).
6. 2 The length of time before auto lock can be customized in the
[settings] menu of the lock.
7 low power warning
7. 1 when the battery is low, the keypad will light up and flash for
a second after it is activated, meanwhile the lock gives a voice
prompt "battery is low, please replace”.
8 keypad lockout
8. 1 When the user enters the incorrect password for 5 times (the
password length is greater than or equal to 4), the door lock will
beep twice, and the password keyboard will be locked for 5
minutes.
8. 2 During the lockout period, the keypad light will flash quickly
on each pressing. Unlocking with APP card or fingerprint is still
functional in this case, and the keypad will be back to normal
once it is unlocked successfully with an APP or a card
8. 3 The keypad will be re-enabled after 5 minutes lockout and
user can continue to input passcode. However, each wrong pass-
code trial will result in 5 minutes lockout thereafter.
9 Delete Bluetooth Administrator/restore to default factory
setting Warning: once the Bluetooth Administrator is deleted,
the lock is set to default factory setting , all previous passcodes
cards and fingerprints are invalidated.
14
13
WEB management login
Open browser and input: lock.orbitasmart.com, then input user
name and password (the ID is same as APP).