Orca OR-444 User manual

OR-444 Sound Harness Assembly Instructions
1. Unpack all the components from the pouch 2. Open up the velcro on the back of the top harness
4. Close the velcro tightly in this order
>right> left > top
5. Insert the lower part
of the spine into the center
pouch of the hip belt
6. Pull the strap through the
groove inside the spine
7. Fix the velcro in place to
secure the spine
9. Your Harness is ready to use
8. Fix the controller tube
(for spine adjustment)
to the hip belt with the velcro
Pouch
Top Harness
Spine
Waist Belt
Right left top
3. Position the spine in the center of the top harness
in accordance to your height
1
2
2
3
44
4
5
5
6
7
8
8
9
www.ORCAbags.com

OR-444 Sound Harness Setup
1. Release each of the top harness straps to the max 2. Pull out the round buckles
on the waist srtap
Then pull out each of the
straps to the max
3. Place the harness on your hips,
close the main buckle around your waist
and pull the to straps to tighten
6. Connect the top aluminum ring to the front connection on your mixer case
NOTE: We recommend connecting it as far from your body as pissiable
7. Connect the bottom aluminum ring to the front or rear D ring on your mixer case
NOTE: We recomend conecting it as far from your body as possible
10. Adjust the straps on the top harness.
These do not need to be tight - just comfortable
8. Push the trigger to release the spine
9. Bend forward to enlarge the spine and move the waight to the hips,
then release the trigger to lock the spine in the desired position
11. Tighten the straps on the waist belt.
These should to be tight in order
to distribute the weight to the hips
NOTE: You can play with the spine height
during work by using the trigger
To Balance the weight between your shoulder and hips
4. Push the two round buckles
and rotate to put more pressure on your hips
5. You can disconnect the top buckle
and roll in the top strap
NOTE: This strap is used when
wearing the waist strap only
Top Harness
Waist Belt
Spine
1
22
33
4
5
6
7
10
11
8
9
1
1
1
1
1
www.ORCAbags.com