Oregon Scientific BWR102 User manual

1
GB
BMI BODY WEIGHT MONITOR
MODEL : BWR102
USER’S MANUAL
ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT
1. enter the setting mode.
2. set the display format.
3. set the hour.
4. set the minute.
5. set the year.
6. set the date-month format.
7. set the month.
8. set the date.
Bwr102AE.p65 05/22/2002, 7:32 PM1

2
GB
9. set the format of the
measurement unit.
ACQUIRE WEIGHT FROM SCALE
1. select the display unit on scale.
2. step on the scale.
3. stand still till reading is displayed.
Note:
Beep sound to indicate
end of measurement.
4. step off the scale.
Note:
Repeat steps 2 - 3 for
next measurement.
Bwr102AE.p65 05/22/2002, 7:32 PM2

3
GB
STORE WEIGHT TO REMOTE DISPLAY UNIT
1. take measurement from scale.
2. activate receiving mode.
Note:
Beep sound indicates the
activation of receiving mode.
Receiving function will be activated
for 30 sec.
3. weight received from scale.
Note:
Beep sound to indicate signal is
being received from the scale.
If height is not set,
BMI will not be displayed.
4. select the user.
5. store the weight.
Note:
Beep sound to indicate the
weight is stored to memory.
No memory for guest mode.
Bwr102AE.p65 05/22/2002, 7:32 PM3

4
GB
USER SETTING / MEMORY RECALL FROM THE REMOTE DISPLAY UNIT
1a. select the user.
Note:
If height is not input,
it will not be displayed.
1b. quit user mode.
2a. recall memory.
2b. set the height.
Bwr102AE.p65 05/22/2002, 7:32 PM4

5
GB
TIPS
A.install the batteries into the unit.
B. When batteries are first installed on both the scale and remote display unit.
B-1. acquire the weight on the scale.
B-2. match the remote display unit with the scale.
Note:
a) beep sound indicates that the matching is activated.
b) check the reading on the scale and the remote display unit .
c) if this fails, repeat step B-1 & B-2.
B-3. set the clock.
C. after changing batteries of the scale, repeat steps B-1 & B-2.
D.after changing batteries of the remote display unit, set the clock.
E. replace all batteries when appears on the scale.
F. replace battery when for scale or for remote display unit appears on remote display unit.
G. memory stored in remote display unit will not be ereased after changing the batteries.
H.if the unit malfunctions or operates irregularly, press reset on the scale and then repeat step B-1 & B-2.
Note:
a) place a blunt stylus into the slot to press reset.
b) after reset please wait for few seconds for the scale to self-calibrate.
I. allow the scale to settle for around 30 min if there is a sudden change in environment . eg. from
an air conditioned room to an open area.
If not disposed of properly, batteries can be harmful. Protect the environment by taking
exhaustedbatteries to authorized disposal stations.
To extend battery life, when battery power is low, replace all the batteries.
J. If there exists irregularity in the remote display unit, press reset on the unit to reset it.
Bwr102AE.p65 05/22/2002, 7:32 PM5

6
GB
WHAT IS BODY MASS INDEX (BMI) ?
Body Mass index (BMI) is a measurement of your body height to weight ratio. BMI is an international
standard that is used for evaluating obesity. It is expressed as your body weight in kilograms divided by the
square of your body height in meters.
body weight (kg)
[body height (m)]2
It can be used as an indication to estimate whether you are overweight or underweight.
According to various statistics when BMI is close to 22, mortality rate is minimal thus the health condition
is most ideal.
Following can be used as a reference for interpretation of BMI.
BMI is low :
Amount of body fat is low. This is desirable for athletes. If the body weight and BMI is
low and you are not an athlete, it is suggested to gain weight through a balanced diet and an exercise program
to improve immunity.
BMI is average :
This shows an ideal BMI i.e. amount of body fat is at a healthy level. It shows low incidence for having a
serious illness.
BMI is high :
Risk for having a serious illness increases. It is better to lower body weight through diet and exercise.
BMI is very high :
This is unhealthy. You are at a high risk for having heart disease, high blood pressure or other serious illness.
It is recommended to lose weight by changing the diet and execising more often.
Mortality Rate
BMI value
Asian
Non-Asian
Important : Please consult your doctor for the diet program.
BMI =
Level Low Average High Very High
BMI 19.9 or less 20.0~24.9 25.0~26.9 30.0 or more
Level Low Average High Very High
BMI 19.7 or less 19.8~24.1 24.2~26.3 26.4 or more
Bwr102AE.p65 05/22/2002, 7:32 PM6

7
GB
TROUBLE SHOOTING
Symptom Description Action
1. incorrect use or weight step off the scale and
measurement is not stable. repeat the measurement.
2. scale overloaded. check whether an excessive mass is put
on the scale and then repeat the
measurement.
3. no height data is inputed for check the height and repeat the
BMI or BMI is out of range. measurement
NOTES FOR THE USER
A. maximum capacity: 150 kg / 330 lb / 23st8lb
B. graduation: 0.1 kg / 0.2 lb
C. height input range : 94.0 - 240.0 cm / 3’1.0” - 7’10.5”
D. BMI measurement range : 5 - 50 kg / m2
E. use additional foot pad for use on carpet
F. power: scale - 4 x LR6 /AA / UM-3 1.5V batteries;
remote display unit - 4 x LR6 / AA / UM-3 1.5V batteries
G. avoid soft and unlevelled grounding
H. do not store the scale erect
Bwr102AE.p65 05/22/2002, 7:32 PM7

8
GB
I. do not load the scale when not in use
J. avoid on wet surfaces
K.avoid from abrasive or corrosive cleaning agent
NOTE ON COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operations.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC :
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
oReorient or relocate the receiving antenna.
oIncrease the separation between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
oConsult the dealer of an experienced radio/TV technician for help.
Company Name:Oregon Scientific, Inc.
Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA
Telephone Number: 503-639-8883
Name and model number of the product: REMOTE WEIGHT SCALE WITH BMI BWR102
Website Address : www.oregonscientific.com
CUSTOMER ASSISTANCE
Should you require assistance regarding this product and its operation, please contact our customer care
department at 800-853-8883 or via email at [email protected].
WARRANTY
This product is warranted to be free of manufacturing defects for a period of 3 months from date of retail
purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not
be possible, contact our customer care department for assistance and a return material authorization. No
returns may be made without a return authorization. Please retain your retail receipt as you may be asked to
provide a copy of it for proof of date purchased.
Upon return of the defective product, Oregon Scientific will at its discretion, replace the product with either
a new or a tested reconditioned product. Should the product be out of warranty, the consumer may purchase
directly from Oregon Scientific a replacement at reasonable cost plus shipping and handling.
Bwr102AE.p65 05/22/2002, 7:32 PM8

9
GB
Légende: -Key Appuyer
-Key Appuyer et maintenir appuyer
-Clignotant
F
Legend: ```` -Press
-Press and hold
-Flashing
GB
Legenda: -Pressione
-Pressione e segure
-Intermitente
P
Leyenda: -Pulsar
-Pulsar y mantener oprimido
-Parpadeando
ES
Legenda: - Premere il tasto
- Premere il tasto e tenerlo premuto
-Flashing lampeggiante
I
Legende: -Betätigen
-Gedrückt halten
-Blinkt
D
Bwr102AE.p65 05/22/2002, 7:32 PM9

10
GB
NOTE FOR THE USER
·Please read the manual carefully before use.
·The scale will calibrate automatically to provide accurate measurement when the scale is placed on the ground. Message:
, willbedisplayedonthescaletoindicatethecalibrationisinprocess.Normallyitwilltake2-3seconds
only. Please leave the scale alone when you see such message.
Bwr102AE.p65 05/22/2002, 7:32 PM10