Organ recovery systems LifePort Kidney Transporter User manual

LifePort Kidney Transporter 1.1
Operator’s Manual

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
i
This Operator’s Manual references
LifePort Kidney Transporter
Model Numbers:
LKT101P
LKT101PNG
2460
For technical assistance, please call Organ
Recovery Systems 24/7 Perfusion Helpline at one
of the numbers listed below.
Organ Recovery Systems Organ Recovery Systems NV ORS Representacoes do Brasil Ltda.
One Pierce Place, Ste 475W DaVincilaan 2, Box 6 170 Moema Avenue, Suite 11 & 12
Itasca, IL 60143 1831 Diegem Sao Paulo, SP 04077-020
USA Belgium Brazil
T +1.847.824.2600 T +32.2.715.0000 T +55.11.98638.0086
F +1.847.824.0234 F +32.2.715.0009
Perfusion Helpline: Perfusion Helpline: Perfusion Helpline:
+1.866.682.4800 +32.2.715.0005 +55.11.98638.0086
+33.9.6723.0016
+34.910.91.16.16
For customers in the US, Canada, Asia, Australia, and New Zealand, please call our USA o󰀩ce.
For customers in Europe, Africa, and the Middle East, please call our Belgium o󰀩ce.
For customers in South and Central America, please call our Brazil o󰀩ce.
www.organ-recovery.com
www.patents-organrecoverysystems.com
Emergo Europe
Prinsessegracht 20
2514 AP The Hague
The Netherlands
LifePort Kidney Transporter manufactured in the USA for Organ Recovery Systems, Inc.
© 2020 Organ Recovery Systems, Inc.
Made and printed in the USA.
EC
EC
REP
REP

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual ii
Table of Contents
Introduction
Purpose of Manual ............................................................................................................................................. 1
Abbreviations...................................................................................................................................................... 1
Label Graphics Explanations.............................................................................................................................. 2
System Description
Intended Use ...................................................................................................................................................... 3
Safety ................................................................................................................................................................. 3
Contraindications................................................................................................................................................ 3
Physical Description ........................................................................................................................................... 3
Ice Container.................................................................................................................................................. 4
Control Panel ................................................................................................................................................. 4
Outer Display ................................................................................................................................................. 4
Pump Deck..................................................................................................................................................... 5
Cover.............................................................................................................................................................. 5
External Connections Panel........................................................................................................................... 6
Operational Accessories..................................................................................................................................... 6
Power Cord .................................................................................................................................................... 6
Data Cable .................................................................................................................................................... 6
Batteries ......................................................................................................................................................... 6
Safe Disposal of LifePort Kidney Transporter and LifePort Batteries................................................................. 7
LifePort Kidney Transporter Disposable Products.............................................................................................. 7
LifePort Kidney Transporter Disposable Cannulas ........................................................................................ 7
LifePort Kidney Transporter Disposable Sterile Drape................................................................................... 7
LifePort Kidney Transporter Disposable Perfusion Circuit ............................................................................. 8
Unpack, Setup, and Run Preliminary Tests
Overview............................................................................................................................................................. 9
Introduction......................................................................................................................................................... 9
Select a Home Base Station .............................................................................................................................. 9
Unpack and Inspect............................................................................................................................................ 9
Run Preliminary Tests......................................................................................................................................... 9
Set Up LifePort Kidney Transporter ............................................................................................................. 10
Fill the Ice Container .............................................................................................................................. 10
Load LifePort Kidney Transporter Disposable Perfusion Circuit ............................................................ 10
Energize the LifePort Kidney Transporter .................................................................................................... 10
Test Operating Modes...................................................................................................................................11
Set Pressure............................................................................................................................................11
Wash .......................................................................................................................................................11
Prime.......................................................................................................................................................11
Infuse.......................................................................................................................................................11
Test Batteries ............................................................................................................................................... 12
Check Duration of Operation (Optional) ...................................................................................................... 12

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
iii
Enter Device Information...................................................................................................................................13
External Communications using Data Station ...................................................................................................13
GPS/GPRS Tracking Capability (If Applicable)..................................................................................................13
Clean Up and Review after Use ........................................................................................................................13
LifePort Kidney Transporter Use
Introduction........................................................................................................................................................14
Professional Overview.......................................................................................................................................14
Maintain LifePort Kidney Transporter for Quick Response Use ........................................................................14
Prepare the Home Base Station ...................................................................................................................14
Prepare LifePort Kidney Transporter for Recovery .......................................................................................15
Travel with LifePort Kidney Transporter and Supplies ..................................................................................15
Fill LifePort Kidney Transporter Ice Container...................................................................................................15
Load LifePort Kidney Transporter Disposable Perfusion Circuit........................................................................16
Enter ORGAN ID Information ............................................................................................................................17
Isolate the Kidney Vascular Structure................................................................................................................17
Cannulate the Kidney ........................................................................................................................................18
LifePort Kidney Transporter Disposable Universal SealRing ........................................................................18
LifePort Kidney Transporter Disposable SealRing Cannula..........................................................................18
LifePort Kidney Transporter Disposable Straight Cannula............................................................................19
LifePort Kidney Transporter Disposable Coupler ..........................................................................................19
Place the Kidney................................................................................................................................................20
Place the Kidney in Kidney Cradle................................................................................................................20
Place the Kidney Cradle in LifePort Kidney Transporter ...............................................................................20
Prime and Initiate Perfusion ..............................................................................................................................21
Check Kidney Parameters.................................................................................................................................21
Data Station Monitoring.................................................................................................................................22
GPS/GPRS Tracking (If Applicable) ..............................................................................................................22
Kidney Behavior on LifePort Kidney Transporter ..........................................................................................23
Leaks at the Cannula or Open Side Branch............................................................................................23
Nonresponsive Kidney ............................................................................................................................23
Remote Monitoring........................................................................................................................................23
Traveling with LifePort Kidney Transporter........................................................................................................24
Rell Ice / Swap Batteries..................................................................................................................................24
Add More Ice.................................................................................................................................................24
Replace Batteries..........................................................................................................................................24
Remove Kidney From LifePort Kidney Transporter ...........................................................................................25
Clean Up After A Case.......................................................................................................................................25
Data Capture and Download (Optional) ............................................................................................................26
Using A Computer .........................................................................................................................................26
Using A Flash Drive.......................................................................................................................................26
Troubleshooting and Diagnostics
Troubleshooting Procedures .............................................................................................................................27
Error Message Explanations .............................................................................................................................28
Power On Self Test (POST)...............................................................................................................................30

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual iv
Maintenance
Overview........................................................................................................................................................... 31
Storage............................................................................................................................................................. 31
Repairs ............................................................................................................................................................. 31
Specications, Precautions, Limitations
Product Specications...................................................................................................................................... 32
Device Classications....................................................................................................................................... 32
Electromagnetic Compatibility .......................................................................................................................... 33
Operational Precautions and Limitations.......................................................................................................... 36
Hazards
Overview........................................................................................................................................................... 38
Index ���������������������������������������������������������������������������������������������������������������������������� 39

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
1
Introduction
Purpose of Manual
This manual provides the essential information necessary for installation, operation, and routine care of
LifePort Kidney Transporter. The instructions within this manual should be carefully followed for safe and
e󰀨ective equipment use. It contains important operation and maintenance information for personnel trained to
use this device.
It is important that all personnel who will operate LifePort Kidney Transporter:
• Read and understand this manual before device operation.
• Follow all warnings and precautions outlined in the sections Operational Precautions and Limitations
and Hazards for their own safety and the safety of those around them.
This manual is NOT to be used as a replacement for training in the art or science of organ perfusion. This
manual does NOT contain information for servicing internal components of LifePort Kidney Transporter. If more
information is needed about installation, organ perfusion, or if you have any questions, please contact the
Organ Recovery Systems 24/7 Perfusion Helpline (see inside front cover for contact details).
In this manual, the following denitions apply for all WARNING and CAUTION statements.
WARNING: A warning statement covers any operation, procedure, practice, etc., which if not strictly
observed, might result in serious injury or long-term health hazards to personnel or patients.
CAUTION: A caution statement covers any operation, procedure, practice, etc., which if not strictly
observed, might result in mild or moderate injury or damage or destruction of equipment or loss of
performance.
Abbreviations
The abbreviations used in this manual are listed and dened in the following table.
A Ampule
AC Alternating Current
°C Degrees Celsius
cm Centimeter (1 cm = .01 m)
EMC Electromagnetic compatibility
EU MDD European Union Medical Device Directive
FCC Federal Communications Commission
FDA Food and Drug Administration
GPRS General Packet Radio Services
GPS Global Positioning System
Hz Hertz
ID Identication or Identication Number
IEC International Electrotechnical Commission
IR Infrared
lb(s) Pound (1 lb = 0.45 kg)
kg Kilogram (1 kg = 2.2 lbs)
LKT LifePort Kidney Transporter
mL/min Milliliters per minute
mmHg Millimeters of mercury (1 mmHg = 1 Torr = 133.3 Pa)
RF Radio Frequency
V Volts

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 2
Label Graphics Explanations
The following table provides an explanation of the label graphics found on LifePort Kidney Transporter.
Warning/Caution Do Not Reuse
Lot Number Do Not Resterilize
Serial Number Temperature limits
Reference Number Sterilized Using Aseptic Fill
STERILE
STERILE
EO
EO
Sterilized Using Ethylene Oxide Consult Instructions for Use
Manufacturer Use By, YYYY-MM-DD
Date of Manufacture, YYYY-MM-DD Keep Dry
Keep Away From Sunlight Electric Shock Hazard
Prescription Medical Device IPX1 Protected against falling water.
Power button/standby power Circuit breaker. Push to reset.
Data Port (USB) Interference may occur in the vicinity of
equipment.
Battery slot graphic showing slot numbering
and insertion orientation.
Medical – General medical equipment as to
electrical shock, re and mechanical hazards
in accordance with ANSI/AAMI ES60601-1.
Medical Device
REF
REF
S
S
N
N
13
2
STERILIZE
STERILIZE
2
STERILE
STERILE
A
A
5

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
3
System Description
Intended Use
LifePort Kidney Transporter (LKT) is intended for use in continuous hypothermic machine perfusion of kidneys.
Safety
LifePort Kidney Transporter is safe when used as described in this manual. It is designed to meet recognized
U.S. and International standards for medical equipment and systems, as stated by the Underwriters
Laboratories (UL) and the International Electrotechnical Commission (IEC).
Electrical and mechanical safety features have been designed into LifePort Kidney Transporter to ensure safe
operation.
These features are as follows:
• The electrical and electronic components are contained within a secure enclosure.
• Perfusate temperature, ow rates, and pressure levels are only adjustable within a set range, which
cannot be changed by the operator.
• Perfusate pressure, ow rate and temperature are continuously monitored.
• Display screens illuminate when the power is on. Stop, Wash, Prime, and Infuse controls are provided
and identied, depending on the mode and options available.
• Acceptable operating ranges are established within LifePort Kidney Transporter for pressure,
temperature, ow rate, battery charge state, bubbles in the perfusate, and conguration integrity. Hard-
wired and software interlocks are built-in to bring LifePort Kidney Transporter to a fail-safe condition if
an unacceptable operating state is detected.
• An audible alert and a descriptive message are given by LifePort Kidney Transporter if an unacceptable
operating state is detected.
Contraindications
There are no known contraindications when used as directed.
Physical Description
LifePort Kidney Transporter is designed to integrate with the clinical environment by using readily available
supplies, requiring minimal user intervention, and by being easy to use. LifePort Kidney Transporter is a
portable, isolated kidney perfusion and transport system, designed to support a donated kidney and to
maintain the organ in a near-normal physiologic state under hypothermic aseptic conditions. An insulated
plastic housing encloses the kidney and perfusate within a LifePort Kidney Transporter Disposable Perfusion
Circuit. LifePort Kidney Transporter components include an Ice Container, Pump Deck, Control Panel, Outer
Display, Bubble Detectors, External Connections Panel, sensors, and four lithium-ion batteries. Two handles
make the unit easy to lift and carry.

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 4
Ice Container
A molded thermoplastic Ice Container with a removable lid is designed to be lled with a recommended mixture
of ice and water to provide a hypothermic temperature environment for the donor kidney.
With the Ice Container properly loaded, LifePort Kidney Transporter preserves kidneys hypothermically to the
same degree as conventional static storage methods, even when powered o󰀨.
Control Panel
The Control Panel is located next to the Pump Deck. The panel can be accessed only when the Cover is
removed, which prevents inadvertent and unauthorized access to the controls. The left screen displays the
current pressure setpoint and the operational mode. The right screen displays user-entered information.
Outer Display
The Outer Display is a horizontal panel visible whether the Cover is in place or removed. It provides
information on operational parameters as well as additional information about the perfusion history.
The display can be toggled between numerical values and trend lines of values for ow and resistance.
The temperature display shows the temperatures of the Ice Container as read at a sensor located near the Ice
Container and the temperature of the perfusate as read by a sensor within the Bubble Trap.
POWER
Off / On
RAISE AND LOWER
infusion pressure (by
1-mmHg increments)
PRESSURE SETPOINT
(default 30 mmHg)
DATA ENTRY /
DISPLAY screen
5-WAY KEYPAD
(highlight, select, and enter information)
SELECT MODE
(Wash, Prime,
Infuse)
Organ ID: ABC123
Kidney:
Blood Type:
Clamp Date:
Clamp Time:
Clamp TMZ:
N/A
N/A
00-00-0
00:00
SET
30
mmHg
Wash
Prime
Infuse
30/18
PRESSURE
mmHg
120
FLOW
ml/min
0.18
RESISTANCE
mmHg/ml/min
2.3°C
TEMPERATURE
Ice
5.0°C
Trap
MESSAGE DISPLAY PANEL
shows Operation Mode, Infusion
Time, Battery Life, organ information,
and if applicable, error messages
TEMPERATURE
two readings measured at two different sensors;
displayed in degrees Celsius
PRESSURE
Systolic and diastolic
pressure within the kidney
FLOW RATE
of perfusate
through the kidney
(VASCULAR) RESISTANCE
within the kidney
PLOT / CLEAR BUTTON
toggles between display modes
and clears error messages
ID: ABC123
Kidney - Right
Blood - O+
TPG_1
Ice Container
LifePort Kidney Transporter
Disposable Perfusion Circuit
Pump Deck
Control Panel
Insulating Cover
Outer Display

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
5
Pump Deck
On the Pump Deck, LifePort Kidney Transporter Disposable Perfusion Circuit tubing traverses a
peristaltic pump, valves and sensors, which control the pressure, speed and uid pathway of the perfusate.
• Pump Deck Locking Arm – Secures the Perfusion Circuit Tubeframe in place on LifePort Kidney
Transporter.
• Infuse and Wash Valves – Determine whether the perfusate enters or bypasses the kidney. In
INFUSE and PRIME mode, the Infuse Valve is open and the Wash Valve is closed, allowing perfusate
to ow into the kidney. In WASH mode and while purging bubbles, the Wash Valve is open and the
Infuse Valve is closed, directing the perfusate through the bypass line, directly back into the perfusate
reservoir.
• Pressure Sensor Cable – Provides LifePort Kidney Transporter with information about the perfusion
pressure felt by the kidney. If the Pressure Sensor connection is broken, LifePort Kidney Transporter
stops and displays an error message.
• Bubble Detectors – Two non-contact Bubble Detectors check the perfusate to prevent bubbles from
entering the kidney. One is located upstream of the Perfusion Circuit Bubble Trap to divert detected
bubbles away from the kidney and into the Wash Line, after which LifePort Kidney Transporter will
resume perfusing. The other is located immediately before the Infuse Valve and prevents detected
bubbles from entering the kidney by stopping perfusion altogether.
• Infusion Pump – A peristaltic pump that propels perfusate through the kidney. It circulates perfusate
through the kidney by moving rollers against the Perfusion Circuit Pump Tubing Loop. LifePort Kidney
Transporter regulates pump speed to control perfusion pressure.
• Pumphead Raceway – Consists of a spring arm and latch which hold the Perfusion Circuit Pump
Tubing Loop in place around the Infusion Pump.
Cover
An insulated, removable, latched Cover securely closes over the housing to protect the kidney and maintain
the proper temperature during perfusion.
Bubble Detectors
Infusion Pump
Wash Valve
Infuse Valve
Pumphead Raceway
Spring Arm and Latch
Pump Deck Locking Arm
Pressure Sensor Cable

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 6
External Connections Panel
LifePort Kidney Transporter connects with an
external power source and other devices through
the External Connections Panel, which provides a
standard AC Power Cord connector and USB-A and
USB-B Data Ports.
Two Circuit Breakers trip if a short circuit occurs.
Depressing the button resets the breaker.
CAUTION: Use only cables and accessories approved by Organ Recovery Systems. Non-approved
cables and accessories may damage the system or interfere with accuracy. For information, contact the
Organ Recovery Systems 24/7 Perfusion Helpline.
Operational Accessories
It is important to use only the accessories supplied by Organ Recovery Systems, as listed below.
Power Cord
LifePort Kidney Transporter comes equipped with a hospital grade Power Cord that connects to the LifePort
Kidney Transporter External Connections Panel and to a standard grounded power outlet of commercial or
hospital quality. Do not substitute an alternate Power Cord.
CAUTION: Do not substitute the Power Cord. Use only the Power Cord supplied from Organ Recovery
Systems. For information, contact the Organ Recovery Systems 24/7 Perfusion Helpline.
Data Cable
The 6-ft (2m) Data Cable connects LifePort Kidney Transporter to an external computer. The USB-A
end connects to the Data Port on the LifePort and the USB-B end connects to the USB port of a
personal computer.
Batteries
LifePort Kidney Transporter uses four specially designed lithium-ion rechargeable batteries as its portable
source of power.
CAUTION: Do not substitute batteries. Use only LifePort Kidney Transporter batteries from Organ
Recovery Systems. For information, contact the Organ Recovery Systems 24/7 Perfusion Helpline.
When powered on, LifePort Kidney Transporter draws power from one battery at a time, using the batteries in
series. It is possible to operate LifePort Kidney Transporter with one to four batteries, as each battery delivers the
11 to 12 volts required. However, it is recommended to use all four batteries, keeping the batteries as fully charged
as possible.
NOTE: Total battery life can be found under the Device Information tab on the Message Display Panel.
Access the batteries through the Battery Door on the LifePort Kidney Transporter back panel. Each battery is
designed to slide in and out of the slots provided. When inserted properly, the battery should be ush with the
slot panel, with the pull-tab visible and available for removing the battery. If the battery does not push ush, it
may be in the wrong orientation. Turn the battery 180 degrees and try again.
Circuit Breakers
Data Ports
Battery Door
AC Power Cord
connector

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
7
The following tips will help you obtain maximum life and serviceability from the batteries.
• Always replace the Battery Door. LifePort Kidney Transporter should not be operated or shipped
without the Battery Door in place.
• LifePort Kidney Transporter will replenish the batteries whenever it is plugged into an external power
supply. Plug in LifePort Kidney Transporter whenever not in transit to keep the batteries at the highest
possible charge. It takes approximately ve (5) hours to completely recharge all four (4) batteries.
NOTE: Keep extra charged batteries on hand when long transport times are anticipated or when
successive uses of LifePort Kidney Transporter with short turnaround times are expected.
• During storage of LifePort Kidney Transporter without connection to an external power supply, the
batteries will slowly drain. After 30 days without charging, the batteries could have little or no charge
and will need a full ve-hour recharge.
• For periods of storage for longer than 30 days, remove the batteries from LifePort Kidney Transporter.
NOTE: Long periods of storage may damage the batteries. Lithium-ion batteries must be disposed of
according to local regulations. If in doubt, call the Organ Recovery Systems 24/7 Perfusion Helpline.
Safe Disposal of LifePort Kidney Transporter and LifePort Batteries
For safe disposal of LifePort Kidney Transporter or LifePort Kidney Transporter batteries, call the Organ
Recovery Systems 24/7 Perfusion Helpline to arrange for pickup from your facility.
LifePort Kidney Transporter Disposable Products
Single-use Disposables, an integral part of the LifePort Kidney Transporter system, are used to maintain the
kidney and perfusate under aseptic conditions, to connect the kidney to the Perfusion Circuit, and to help
maintain aseptic conditions while working inside the Perfusion Circuit. Each LifePort Kidney Transporter
Disposable is factory sterilized and delivered in a sterile pack.
WARNING: For single use only. Do not reuse, reprocess, or resterilize. Reusing, reprocessing,
or resterilization of single-use devices creates a potential risk of patient or user infections due to
contamination. This contamination may lead to injury, illness, or other serious patient complications.
Discard any unused portion of the product.
NOTE: To reorder LifePort Kidney Transporter Disposables, please contact Organ Recovery Systems.
LifePort Kidney Transporter Disposable Cannulas
LifePort Kidney Transporter Disposable cannulas attach LifePort Kidney Transporter Disposable Perfusion
Circuit to the kidney’s renal artery. A large range of cannula types and sizes are available, making it possible to
choose the cannula most compatible to the anatomy of the kidney.
LifePort Kidney Transporter Disposable Sterile Drape
The LifePort Kidney Transporter Disposable Sterile Drape is used to aid in maintaining aseptic conditions while
working within the LifePort Kidney Transporter Disposable Perfusion Circuit.

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 8
LifePort Kidney Transporter Disposable Perfusion Circuit
LifePort Kidney Transporter Disposable Perfusion Circuit contains the uid management components
necessary for perfusing a single kidney and is comprised of following:
• Organ Cassette – The housing that contains the kidney and acts as the perfusate reservoir, where the
kidney is maintained partially submerged.
• Low Fluid Detection Chamber – Provides real-time recognition of low uid levels and an
automatic stop of active perfusion if perfusate volume drops below a certain level.
• Inner and Outer Lids – A transparent, sterile Inner Lid and transparent Outer Lid provide a
redundant watertight seal.
• Kidney Cradle – Supports the kidney.
• Mesh Organ Restraint – Holds the kidney in place in the Kidney Cradle.
• Cannula Mount – Adjustable mount on the Kidney Cradle that holds the cannula in place.
• Tubeframe – Plastic frame that positions the tubing around the Infusion Pump, valves, and sensors of
the Pump Deck.
• Tubing Circuit – The sealed uid pathway that draws perfusate from the Organ Cassette for
circulation into the kidney, is comprised of the following:
• Bubble Trap – Helps prevent air from entering the Infuse Line.
• Infuse, Wash and Return Lines – Manage perfusate ow.
• Pump Tubing Loop – Extends from the Tubeframe and stretches around the Infusion Pump.
• Compliance Chamber – Helps maintain steady perfusion pressures.
• Filter – Collects material that could block kidney vasculature from achieving proper ows.
• Pressure Sensor Connector – A ow-through Pressure Sensor within the Infuse Line that
measures perfusate pressure within the Perfusion Circuit. Connects to the Pump Deck Pressure
Sensor Cable and sends pressure data to LifePort Kidney Transporter.
Kidney Cradle
Pressure Sensor Connector
Tubing Circuit (Infuse, Wash,
and Return Lines)
Tubeframe Bubble Trap
Organ Cassette
Mesh Organ Restraint
Inner and Outer Lids
Cannula Mount
Pump Tubing Loop
Compliance Chamber
Filter
Low Fluid Detection
Chamber

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
9
Unpack, Setup, and Run Preliminary Tests
Overview
This section provides information for receiving, unpacking, setup and preliminary testing of LifePort Kidney
Transporter. Refer to LifePort Kidney Transporter Use for routine operating instructions.
Introduction
LifePort Kidney Transporter is shipped in a special container that is marked for appropriate handling. It should be
opened and checked only by a person trained and qualied to work with electronic medical equipment.
Select a Home Base Station
Designate a home base station for each LifePort Kidney Transporter where it can be set up and recharged
between cases. The home base station should be a secure area, provide a clean benchtop or tabletop space,
and meet the following requirements:
• Climate-controlled area of approximately 21°C, 50% humidity.
• No direct sunlight.
• AC electrical outlets (2 to 4 plugs: 120V/15A in the USA).
• Storage for LifePort Kidney Transporter Disposables, batteries, tools and spares.
• Access to crushed or pelletized ice (hollow cubes not recommended).
• Access to a utility sink for cleanup and to provide water for the ice bath.
• Access to medical waste disposal.
• Access to refrigerated storage for perfusate and other medications.
• Tabletop space for a computer with USB port (recommended).
• Storage space for transplant coordinator gear: cart, bags, procedure kits and coolers.
• Proximity to operating rooms and ready access to car, ambulance or helicopter loading areas.
Unpack and Inspect
Carefully remove LifePort Kidney Transporter and its accessories from the shipping container. Save the
packing materials for shipping and storage.
After unpacking, thoroughly inspect the system and all accessories for damage to ensure that:
• LifePort Kidney Transporter housing is not bent or distorted.
• There are no dents, chips or cracks in the housing surface.
• Manual controls and movable parts, such as connectors, operate properly.
• Control Panel and Outer Display are properly aligned.
• All items listed on the shipping documents are present.
Report any damage found from this inspection to the carrier immediately. If you have any concerns
about the condition of LifePort Kidney Transporter or its accessories, contact the Organ Recovery Systems
24/7 Perfusion Helpline.
Run Preliminary Tests
Upon receipt of a new LifePort Kidney Transporter and prior to clinical use, it is recommended that the user
complete the following tests. After each step, ensure LifePort Kidney Transporter functions as described and
that there are no malfunctions, leaks or irresolvable errors. If di󰀩culties arise during setup and testing, refer to
Troubleshooting and Diagnostics.

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 10
Set Up LifePort Kidney Transporter
CAUTION: LifePort Kidney Transporter weighs 45 lbs (20.4 kg) fully loaded. Use proper lifting
procedures to avoid injury.
1. Place LifePort Kidney Transporter so that the Outer Display is easily accessible.
2. Unlatch and remove LifePort Kidney Transporter Cover and store it nearby.
3. Complete your review of LifePort Kidney Transporter, ensuring it is secure, intact, and that nothing
appears damaged, before starting the preliminary tests.
Fill the Ice Container
CAUTION: To avoid inadvertently freezing the kidney, USE ONLY ICE AND COLD WATER in LifePort
Kidney Transporter Ice Container. A mixture of ice and cold water in the Ice Container will ensure that
temperatures remain within the appropriate range for clinical kidney preservation.
NOTE: As a safeguard to the kidney, LifePort Kidney Transporter will not operate unless the Ice Container
temperature is chilled below 8°C. After installation of the Ice Container, it may take several minutes before
the display reads a temperature below 8°C.
1. Open the Ice Container and ll with crushed or pelletized ice, pushing the ice as far in as possible.
2. Pour approximately 1 Liter of cold water (less than 10°C) into the Ice Container, which will gradually
loosen the ice.
3. Add more ice and another 0.5-1.0 Liter of cold water until the Ice Container is full, maximizing the
amount of ice added.
4. Replace and lock the Ice Container Lid.
Load LifePort Kidney Transporter Disposable Perfusion Circuit
NOTE: As this is a preliminary test, aseptic technique does not have to be followed. For detailed, sterile
instructions, refer to LifePort Kidney Transporter Disposable Perfusion Circuit Instructions For Use.
1. Ensure Locking Arms and Pumphead Raceway are open on LifePort Kidney Transporter.
2. Unpack LifePort Kidney Transporter Disposable Perfusion Circuit and place into the Ice Container.
3. Position the Tubeframe upright, perpendicular to the Pump Deck. Insert the hinges into the receivers
before rotating the Tubeframe at onto the Pump Deck.
4. Stretch the Pump Tubing Loop around the Infusion Pump. Close and latch the Pumphead Raceway.
5. Rotate the Pump Deck Locking Arm 90 degrees until it clicks into place.
6. Connect the Pressure Sensor Cable from the Pump Deck to the Pressure Sensor Connector on the
Tubeframe.
7. Remove the Inner and Outer Perfusion Circuit Lids and pour 1 Liter of cold (less than 10°C) saline into
the LifePort Kidney Transporter Disposable Perfusion Circuit.
8. Replace and secure the Inner and Outer Perfusion Circuit Lids.
Energize the LifePort Kidney Transporter
1. Connect the Power Cord to LifePort Kidney Transporter External Connections Panel and plug it into an
external power supply.
2. Press and hold the POWER button until you hear an audible beep, then release.
3. On the Control Panel, you should observe the following:
• The screens illuminate.
• The pressure setpoint shows default value of 30 mmHg.
• Mode control displays show WASH, PRIME, and INFUSE.

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
11
4. On the Outer Display panel, you should observe the following:
• The screens illuminate.
• Pressure, Flow, and Resistance all read zero.
• Temperature shows the temperature of the Ice Container.
NOTE: The temperature reading may be high when rst energized. When the Ice Container temperature
is above 8°C, LifePort Kidney Transporter will not function and indicate an error message. It may take
several minutes before the display reads below 8°C and the device is operational.
If errors occur during setup or while energizing, refer to Troubleshooting and Diagnostics for information on
how to proceed.
Test Operating Modes
Set Pressure
1. Press the pressure UP/DOWN arrow buttons and verify that the pressure can be adjusted by 1 mmHg
with each press.
2. Using the UP/DOWN arrow buttons, set the pressure to 40 mmHg.
Wash
1. Press the WASH button and verify Infusion Pump rotation.
2. Verify that saline is drawn through the Tubing Circuit, down into the lter, into the Bubble Trap, and
through the Wash Line. Visually verify that the saline is contained in the tubing, without leaking, and is
not owing through the Infuse Line.
3. Press the STOP button to exit Wash Mode.
Prime
1. Press the PRIME button and observe that the ow diverts into the Infuse Line.
2. Verify saline is contained within the tubing, without leaking, and is not owing through the Wash Line.
3. Remove the Outer and Inner Perfusion Circuit Lids.
4. Squeeze or clamp the Infuse Line. LifePort Kidney Transporter will cease function, provide an audible
alert, and the Message Display Panel should read: High Pressure.
5. Release the Infuse Line and press the STOP button to clear the error message.
Infuse
NOTE: You must make an entry under ORGAN ID, KIDNEY and BLOOD TYPE before you can run an
Infuse test.
1. On the 5-way keypad, press OK, use the arrow buttons to select ORGAN INFORMATION, and press
OK again.
2. Select ORGAN ID, then press OK.
3. Select the alphanumerics for the Organ ID you wish to assign, pressing OK with each selection.
4. Scroll to DONE, press OK, and select SAVE to conrm.
5. Select KIDNEY, then press OK.
6. Select NA, press OK, and select SAVE to conrm.
7. Select BLOOD TYPE, then press OK.
8. Select NA, press OK, and select SAVE to conrm.
NOTE: Attach a ow restrictor, a 20-gauge or smaller syringe needle will also work, onto the Luer tting on
the Infuse Line.

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 12
9. Press the INFUSE button.
10. Verify that pressure, ow, resistance, and temperature readings are displayed on the Outer Display.
NOTE: TRAP temperature represents the temperature measured at the Bubble Trap, which is only
displayed during active infusion.
11. Verify that the ORGAN INFORMATION you entered is displayed.
12. Press the STOP button to exit Infuse Mode.
13. Press and hold the POWER button to turn o󰀨 LifePort Kidney Transporter.
Test Batteries
Upon receipt of a new LifePort Kidney Transporter and prior to clinical use, it is recommended that the user
complete the Preliminary Tests with and without the batteries. Allow the batteries to charge in LifePort Kidney
Transporter for at least ve hours prior to clinical use.
1. Open LifePort Kidney Transporter Battery Door by sliding it away from the product label.
2. Insert the batteries.
3. Replace the LifePort Kidney Transporter Battery Door.
NOTE: LifePort Kidney Transporter Battery Door should be in place whenever LifePort Kidney Transporter is
operated or transported.
4. Verify the Outer Display shows that LifePort Kidney Transporter is plugged in and charging. Allow the
batteries to charge in LifePort Kidney Transporter for at least ve hours before unplugging the Power
Cord.
5. Repeat the ENERGIZE and TEST OPERATING MODES tests as described above, using battery power.
NOTE: Ensure that the Power Cord is unplugged before repeating the tests to accurately assess battery
power.
Check Duration of Operation (Optional)
1. Press OK.
2. Select DEVICE INFORMATION, then press OK.
3. View percentage of battery charge. The screen returns to the main screen in 10 seconds.
4. With the batteries fully charged and the Ice Container full, operate LifePort Kidney Transporter in Infuse
Mode for 24 hours. During this test:
• Keep the Flow Restrictor positioned on the Infuse Line.
• Keep the Cover closed for the entire 24 hours.
5. Verify that the ice and batteries last throughout the entire duration of the test.

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
13
Enter Device Information
1. Press OK, use the arrow buttons to select DEVICE INFORMATION.
2. Select DEVICE ID, then press OK.
3. Select the alphanumerics for the name you wish to assign LifePort Kidney Transporter, pressing OK with
each selection.
4. Scroll to DONE, press OK, and select SAVE.
5. Select DATE to enter the current month, day, and year and press OK. Select SAVE to conrm.
6. Select TIME to enter the current time and press OK. Select SAVE to conrm.
7. Select TIME ZONE (TMZ) to enter the alphanumerics of the time zone you wish to assign, pressing OK
with each selection.
NOTE: The time zone must be in 3 characters, e.g., “CST” for “Central Standard Time”.
8. Scroll to DONE, press OK, and select SAVE.
9. Select LANGUAGE and scroll to the desired language you want LifePort Kidney Transporter to display.
10. Scroll to DONE, press OK, and select SAVE.
External Communications using Data Station
Data Station software allows communication between LifePort Kidney Transporter and a computer, making it
possible to monitor LifePort Kidney Transporter operations.
Consult the Data Station User Guide to install the application on the computer(s) you plan to use to monitor
LifePort Kidney Transporter.
GPS/GPRS Tracking Capability (If Applicable)
LifePort Kidney Transporter model LKT101P contains a built in GPS/GPRS that will interact with an online
website portal. Using the LifePort Kidney Transporter Portal, users can:
• Locate, track, and view an entire history of travel for LifePort Kidney Transporter.
• Read information from LifePort Kidney Transporter such as renal resistance and temperature, allowing
customers to vigilantly monitor the kidney as it travels to its destination.
Access to the customized portal will be setup prior to initial use by the customer for convenience. The web
address for the LifePort Kidney Transporter GPS/GPRS Portal is https://lifeport.blacklinegps.com.
LifePort Kidney Transporter model LKT101PNG does not have this capability.
Clean Up and Review after Use
1. If LifePort Kidney Transporter is still running, press the STOP button.
2. Press and hold the POWER button.
3. Remove LifePort Kidney Transporter Disposable Perfusion Circuit and properly dispose of it.
4. Remove the Ice Container and empty its contents.
5. Dry and place the Ice Container back into LifePort Kidney Transporter. Leave the Ice Container Lid ajar.
6. Wipe down LifePort Kidney Transporter with a 70% isopropanol solution.
7. Replace LifePort Kidney Transporter Cover and properly store for future use.
Problems uncovered during any of these tests should be investigated and resolved. Be aware to look for leaks,
misrouted ow, and extra or missing error messages.
LifePort Kidney Transporter should always stay dry and error-free. Anomalies uncovered during any of these
tests such as leaks, misrouted ow, and extra or missing error messages should be investigated and resolved.
If you need assistance, contact the Organ Recovery Systems 24/7 Perfusion Helpline.

755-00002 Rev P LifePort Kidney Transporter Operator’s Manual 14
LifePort Kidney Transporter Use
Introduction
This section provides information on routine use of LifePort Kidney Transporter from setup through cleanup
during a clinical case.
NOTE: Be sure to keep the batteries plugged in and charging when LifePort Kidney Transporter is not in use.
Professional Overview
Before using LifePort Kidney Transporter in a clinical setting, thoroughly familiarize yourself with the device and
kidney perfusion. Consider practicing on discarded or animal kidneys. Various settings should be tried and a
sense obtained as to the e󰀨ects on the kidney.
Be aware of the following important factors:
• Select an infusion pressure for use according to good clinical practice to assure su󰀩cient ow while
preventing vascular damage.
• Secure cannulas to avoid perfusate leaks while preventing damage to the transplanted artery.
• Inspect and position the cannulated artery to avoid any twists or kinks that would occlude the ow of
perfusate.
• Maintain aseptic conditions for the kidney and perfusate at all times. Sealing the Organ Cassette while
using standard aseptic technique is required.
• Maintain hypothermic conditions for the kidney by keeping LifePort Kidney Transporter Ice Container
lled. Use only ice and water to prevent freezing.
Maintain LifePort Kidney Transporter for Quick Response Use
Before you receive the call that LifePort Kidney Transporter is needed, keep it ready to go at a moment’s notice
by performing the following procedures.
Prepare the Home Base Station
LifePort Kidney Transporter and its supplies and accessories are designed to be an integral part of the
recovery team’s supply pack, to be seamlessly included in the recovery and transplant process.
Have the following prepared to keep LifePort Kidney Transporter in a ready-to-use state:
• Crushed or pelletized ice—10 lbs (5-6 kg) or more—readily available in a freezer or ice maker.
• Batteries loaded in LifePort Kidney Transporter and kept fully charged. Maintain the batteries’ charge by
keeping LifePort Kidney Transporter plugged into an external power supply.
• Perfusion Circuit, Sterile Drapes, and cannulas packed and ready.
• Portable wheeled cart available and ready.
• Surgical instruments, suture, solution decanter, and supplies packed and ready.
• Spare parts at hand, such as additional charged batteries, Power Cord, spare cannula, etc.
• Distilled, sterile, or regular tap water (about 5 Liters)—chilled in the refrigerator.
• Perfusion solution and organ ush solution—chilled in the refrigerator.
CAUTION: Use only machine perfusion solution in LifePort Kidney Transporter. Check the
labeling of the perfusion solution and make sure that it is intended for machine perfusion.
NOTE: If you are uncertain about which solutions are appropriate, contact the Organ Recovery Systems
24/7 Perfusion Helpline for information on recommended perfusates that work best in LifePort Kidney
Transporter.

LifePort Kidney Transporter Operator’s Manual 755-00002 Rev P
15
Prepare LifePort Kidney Transporter for Recovery
These instructions can be modied according to your institution’s procedures. When you receive the call that
LifePort Kidney Transporter is needed, perform the following procedures to prepare the device before taking it
to recover a kidney:
• Make sure you have everything you need – using a checklist, double check all your equipment and
supplies to make sure it is all packed and on the cart.
• Recheck the batteries – check that the batteries are fully charged. Press the POWER button and verify
that the LifePort Kidney Transporter powers up. Press the POWER button again to turn it o󰀨.
• Visually check LifePort Kidney Transporter and Disposable Perfusion Circuit – check for overall
integrity and transport-worthiness before each use. Do not use if parts are loose, cracked, broken, or
liquid is leaking.
Travel with LifePort Kidney Transporter and Supplies
If you’re traveling in a vehicle with LifePort Kidney Transporter, take the following precautions:
• Push the cart with LifePort Kidney Transporter and supplies to the vehicle and place the LifePort Kidney
Transporter on the seat or in the trunk.
• Secure LifePort Kidney Transporter from sliding or rolling. If the device is placed on a vehicle seat, the
normal seat belt can be used to restrain it while driving.
• The cart and supply packs can also be loaded onto the seats or into the trunk.
LifePort Kidney Transporter can withstand the normal handling involved in traveling between hospitals;
however, it should be kept in an upright orientation to minimize the potential for leaks, spills, or air bubbles.
At a remote recovery site, LifePort Kidney Transporter and supply packs can be reloaded onto the cart, which
can be pushed to the donor operating room.
Fill LifePort Kidney Transporter Ice Container
CAUTION: To avoid inadvertently freezing the kidney, USE ONLY ICE AND WATER in LifePort Kidney
Transporter Ice Container. A mixture of ice and water in the Ice Container will ensure that temperatures
remain within the appropriate range for kidney preservation.
NOTE: As a safeguard to the kidney, LifePort Kidney Transporter will not operate unless the Ice Container
temperature is chilled below 8°C. After installation of the Ice Container, it may take several minutes before the
display reads a temperature below 8°C.
1. Remove the Cover from LifePort Kidney Transporter and remove the Ice Container.
2. Open the Ice Container and ll it with crushed or pelletized ice, pushing the ice as far in as possible.
3. Pour approximately 1 Liter of cold water (less than 10°C) into the Ice Container, which will gradually
loosen the ice.
4. Add more ice and another 0.5-1.0 Liter of water until the Ice Container is full, maximizing the amount of ice
added.
5. Replace and lock the Ice Container Lid.
6. Place locked Ice Container in LifePort Kidney Transporter.