ORiNG IMC-111 Series User manual

Installation
IMC-111 Series
Version 1.2
Industrial Media Converter
Quick Installation Guide
ORing Industrial Networking Corp.
Media
Converter
Media
Converter
Features
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Supports Ethernet to fiber or Ethernet to SFP port
Supports LFP (Link Fault Pass-through) function
Supports full/half duplex operation mode
Supports store and forward transmission
Provided DIP-Switch to setting function
High reliability and rigid IP-30 housing
DIN-Rail and wall-mount enabled
IMC-111 Series
IMC-111 series
IMC-111 series
IMC-111 series LFP (Link Fault Pass through)
IMC-111 series
IMC-111 series
-
( ) 100
'
-.
,
,
is a cost effective solution for the conversion between 10/100Base-
T X and Base-FX interface, it allows you to extend communication distance by
optical fiber. supports MDI/MDIX auto detection, so you don t need to
use crossover wires. with wide operating temperature range from -40
~ 70 and accepts a wide voltage range from dual 12 ~ 48 VDC power inputs, so it is
suitable for harsh operating environments.
also supports the feature When
one side of the link fails, the other side continues transmitting packets, and waiting for
a response that never arrives from the disconnected side. Use the DIP-Switch to
enable the LFP function then will force the link to shutdown as soon
as noticed that the other link has failed giving the application software a chance to
react to the situation. Therefore, the is reliable media converter and
can satisfy most demand of operating environment.
oC
Introduction
Din-Rail Install Step
Quick Installation Guide
QIG IMC-111 Series PRINTED ON RECYCLED PAPER
Specifications
ORing Media Converter
Model IMC-111FB-MM-SC
10/100 Base-T(X) Ports in
RJ45 Auto MDI/MDIX 1
Physical Ports
Fiber Ports Number
Technology
Ethernet standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3x for Flow control
LED Indicators
Green:PowerLEDx2(ON:powerinputon-line/(OFF)powerinputoff-line
Power indicator
GreenforfiberportLink/Act-(ON)Linkup/(Flash)Acting/(OFF)Linkdown
Green for fiber port duplex indicator- (ON) Full-Duplex/ (OFF) Half-Duplex
100Base-FX fiber port indicator
Power
Input power
Power consumption(Typ.)
Dual12~48VDCpowerinputson4-pinterminalblock
2.2 Watts
Overload current protection
Reverse polarity protection
Present
Present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH) 26.1(W)x70(D)x95(H)mm(1.03x2.76x3.74inch)
Weight (g)
218 g
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-6
IEC60068-2-32
Vibration
EN60950-1
Safety
Free Fall
Warranty
5years
-40to70C(-40to158F)
oo
INDUSTRIAL
Connections of Media converter and LFP
function
IMC-111FB-SS-SC
1
Wall-mounted Install Step
GreenforportLink/Act-(ON)Linkup/(Blinking)Acting/(OFF)Linkdown
Amber for 100Mbps/10Mbps indicator- (ON) Working at 100Mbps / (OFF) Working at 10Mbps
Greenforportduplexindicator-(ON)Full-Duplex/(OFF)Half-Duplex
10/100Base-T(X) RJ 45 port indicator
ORing Industrial Networking Corp.
Copyright© 2013 ORing
All rights reserved.
TEL: [phone]
FAX: [phone]
Website: www.oring-networking.com
E-mail: [email protected]
IMC-111PB
1
1- -
100Base-FX Multi-mode Ports
Fiber Diameter (µm) 62.5/125
50/125
µm
µm
Fiber Optical Connector SC
Typical Distance (Km) 2Km
Wavelength (nm) 1310 nm
Max. Output Optical Power (dbm) -14 dbm
Min. Output Optical Power (dbm) -23.5 dbm
Max. Input Optical Power
Saturation() 0dbm
Min. Input Optical Power
Sensitivity() -31 dbm
Link Budget (db) 7.5 db
Fiber Ports Number --
100Base-FX Single-mode Ports
Fiber Diameter (µm)
Fiber Optical Connector
Typical Distance (Km)
Wavelength (nm)
Max. Output Optical Power (dbm)
Min. Output Optical Power (dbm)
Max. Input Optical Power
Saturation()
Min. Input Optical Power
Sensitivity()
Link Budget (db)
1
9/125 µm
SC
30 Km
1310 nm
-8 dbm
-15 dbm
0dbm
-34 dbm
19 db
100Base-FX SFP port --1
Processing Store-and-Forward
DIP-Switch setting
DIP-Switch1forLFPmodeselection:(ON) /(OFF)enable disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON)
(OFF)
Half-Duplex /
Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex /
(OFF) Full Duplex
Amber LED - (ON) LFP indication / (OFF) LFP function disable
LFP statue indicator
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
213 g
1907-2-29-IMC111XB-1.2

DPX
ETH 10/100M
1
2
P1 P2 LFP
DPX LNK/
ACT
IMC- 111FB
10M
LFP
Half Duplex
2
1
Version 1.2
Industrial Media Converter
Quick Installation Guide
ORing Industrial Networking Corp.
Accessory
Dust Cover (RJ-45)
2
QIG
8
Screw (M3 X3)
4Wall-mounted kit
525mm DIN-Rail kit
6
4-Pin Terminal block
1
Front Panel
1X1, 2X1, 4X8,
X1,
X2,
IMC-111FB-MM-SC
Model name Model Description Accessory
Industrial mini type Ethernet to fiber media converter with
1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2Km/1310nm,
SC connector
IMC-111FB-SS-SC
7
5
6X1,
Packing list
100Base-FX Connection
SC-Port to SC-Port Cable Wiring
SC-Port Pinouts
SC-Port Pinouts
SC-Port Pinouts
SC-Port Pinouts
Tx
Rx
Rx
Tx
Cable Wiring
Tx Rx
Communication Connections
RJ45 (8-pin) to RJ45 (8-Pin) Straight-Through Cable Wiring
RJ45 Plug Pin1
Straight-Through Cable
Switch Port
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
NIC Port
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
3
6
1
2
RJ45 (8-pin) to RJ45 (8-Pin) Cross-Over Cable Wiring
RJ45 Plug Pin1
Cross-Over Cable
Switch Port
(NIC Port)
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
1
2
3
6
Switch Port
(NIC Port)
(Rx+)
(Rx-)
(Tx+)
(Tx-)
(Tx+)
(Tx-)
(Rx+)
(Rx-)
10/100Base-T(X) Ethernet Port Connection
RJ45 (8-pin, MDI) Port Pinouts
18
Pin Single
1
2
3
6
Tx+
Tx-
Rx+
Rx-
RJ45 (8-pin, MDI-X) Port Pinouts
18
Pin Single
1
2
3
6
Rx+
Rx-
Tx+
Tx-
Pin
Rx Tx
Power Connection Guide
Power Cable with power jack
7
Industrial mini type Ethernet to fiber media converter with
1x10/100Base-T(X) and 1x100Base-FX,single-mode, 30Km/1310nm,
SC connector
8X1
Fiber Port
LNK/ACT LED
Frame Ground
V-
V+
Power
Supply
12-48 VDC
PWR2
V2+ V2-
G
PWR1
V1+ V1-
Power
Supply
12-48 VDC
V-
V+
DC12-48V
Quick Installation Guide
PRINTED ON RECYCLED PAPER
IMC-111 Series
LAN Port Duplex LED
DPX
ETH 10/100M
1
2
P1 P2 LFP
DPX LNK/
ACT
IMC- 111PB
10M
LFP
Half Duplex
2
1
SFP Port
LNK/ACT LED
LFP LED
SFP 100Base-FX
Fiber Port
LNK/ACT LED
(Green)
10/100Base-T(X) LAN
Port
100M Indicator
(Amber)
100Base-FX Fiber
Port
TX
RX
DIP Switch for Mode
Select
Power LED
DIP Switch Function
1X1, 2X1, 3X1,
X1,
X8,
IM C - 111 PB Industrial mini type Ethernet to fiber media converter with
1x10/100Base-T(X) and 1x100Base-FX, SFP socket 6
4
5X2, 7X1,
Dust Cover (SFP)
3
1X1, 2X1, 4X8,
X1,
X2,
7
5
6X1, 8X1
Fiber Port Duplex LED
X1
8
LC-Port Pinouts
Tx
Rx
LC-Port to LC-Port Cable Wiring
Rx
Tx
Cable Wiring
Tx Rx
LC-Port Pinouts
100Base-FX SFP Port Connection
Rx Tx
Media
Converter
Media
Converter
INDUSTRIAL
QIG IMC-111 Series
Ethernet Half-duplex
DIP-Switch
LFP mode disable
Ethernet speed 10Mbps
2ON
OFF
3ON
OFF
LFP mode enable
Ethernet speed Auto-negotiate10/100Mbps
Ethernet Full/Half-duplex Auto-negotiate
Fiber Full-duplex
Fiber Half-duplex
4ON
OFF
Description
1ON
OFF