ORION ROBOTICS Razor User manual

(c) 2012 Orion Robotics. All Rights Reserved.
Razor Assembly Guide
Razor
Assembly Guide

(c) 2012 Orion Robotics. All Rights Reserved. 2
Razor Assembly Guide
Introduction
All Orion Robotics brackets are made in the USA. We fabricate them using a large in-house industrial
laser. We anodized our brackets to prevent oxidation. This gives the bracket a much better look and
longer life.
Tools
There are some basic tools you will need to get started. A good set of Phillips screw drivers and small
pliers. Different sized screws are used throughout each robot. So more than one size Phillips is a good
ideal.
Safety
When working with robots some basic safety rules should be followed:
1. Eye protection should be worn at all times.
2. Some bracket edges can be sharp and can easily cut you.
3. The robots are powered from lithium polymer, or Li-Po batteries with high discharge rates. If shorted
or incorrectly connected they can easily cause re or other damaged.
4. When working with the robots there are several pinch points. Be aware as this will hurt if you get
caught in them.
5. Don’t be in a rush when assembly your robots. Injury or damaged parts can easily result. Take your
time and double check each step.

3
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 1
2x
1x
M3X8
Flathead
1x
1x
M3N
M3LW
1x
M3W

(c) 2012 Orion Robotics. All Rights Reserved. 4
STEP 2
4x
M3X6

5
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 3
2x
BEARING

(c) 2012 Orion Robotics. All Rights Reserved. 6
STEP 4

7
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 5
2x
E-CLIP

(c) 2012 Orion Robotics. All Rights Reserved. 8
STEP 6
2x
M4X8
2x
M4LW

9
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 7
2x
BEARING

(c) 2012 Orion Robotics. All Rights Reserved. 10
STEP 8
2x
E-CLIP

11
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 9
2x
M3X8
2x
M3LW

(c) 2012 Orion Robotics. All Rights Reserved. 12
STEP 10
2x
M3X12
2x
M3W
2x
M3N

13
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 11
1x
M3S

(c) 2012 Orion Robotics. All Rights Reserved. 14
STEP 12
1x
M3X8
1x
M3W
1x
M3LW

15
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 13
2x
1x
M3LW
1x
M3N
1x
M3W
1x
M3X8
Flathead

(c) 2012 Orion Robotics. All Rights Reserved. 16
STEP 14
4x
M3X6

17
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 15
2x
BEARING

(c) 2012 Orion Robotics. All Rights Reserved. 18
STEP 16

19
(c) 2012 Orion Robotics. All Rights Reserved.
STEP 17
2x
E-CLIP

(c) 2012 Orion Robotics. All Rights Reserved. 20
STEP 18
2x
M4X8
2x
M4LW