Osaki OS-3D Aspire User manual

OS-�D Aspire

EN1
2
8
9
13
13
26
27
28
29
31
32FCC Radiation Exposure Statement
Things to know and do before use
How to use the remote
33Industry Canada Notice

EN2
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic precautions should always be followed, including the following:
Read all instructions before using (this product).
DANGER-To reduce the risk of electric shock:
• Always unplug this product from the electrical outlet after using and before cleaning.
• Never use unauthorized parts or hardware for this chair. No modifications are allowed.
• Carefully examine the covering before each use. Carefully examine the upholstery from top to
bottom. If there are any signs of cracking, blistering, rethreading or tearing, stop using the
product and contact the manufacturer for a replacement or further instructions. Please unplug
the chair from the power outlet.
• This product must be kept a climate-controlled area. 60-85 degrees Fahrenheit with very low
moisture at ALL times.
WARNING-To reduce the risks of burns, fire, electric shock or injury to persons:
• An appliance should never be left unattended when plugged in. Unplug from outlet when not in
use and before any authorized installs or alterations are being made.
• Close supervision is required if you have any pets, children in the area when chair is being used.
• Use this product only for its intended use as described in this manual. Do not use attachments
not recommended by the manufacturer.
• Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has
been dropped, damaged or dropped into water. Contact the manufacturer for examination and
repair.
• Keep the cord away from heat source like a vent or a humid area like a bathroom.
• Never pull on any cables wire on this product.
• If any the of the air hoses are plugged stop using the chair and contact the manufacturer and
unplug power from the outlet.
• Never allow for any object to fall into the chair or cracks of the chair.
• This product is for indoor use only in a dry climate controlled area.
• Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
• To disconnect, turn all controls to the off position then remove plug from outlet.
• Keep children away from this product as working parts can seriously injure a child or pet.
• Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
• Carefully Monitor the heating areas of the chair. If there is any abnormality or discomfort, turn off
the chair, unplug the power from the outlet and contact the manufacturer.
• Do not operate this product using a blanket or pillow. Excessive heating can occur and causing
fire, electric shock or injury to persons.
• Any elderly, handicap person, children (under 18) or with any person with a medical must consult
with a medical doctor if this product can be used.
Any person with a implanted medical device ore medical condition or under any
treatment must get approval from your medical doctor before using this device.
SAVE THESE INSTRUCTIONS

If you feel unwell while using or after using the chair, stop immediately and contact your physician.
Do not use the chair again unless approved by your doctor.
EN3
Any person with a pacemaker cannot use this
product. The chair may cause an electronic
malfunction to the medical device;
Persons with any injuries should not use
tthis product.
Persons with higher or lower regular body
temperature, fever, inflammation, cold
symptoms, high blood pressure or any poor
health conditions should consult a
physician before using this product;
Person unable to feel or insensitive to heat
on their skin such as a diabetic patient;
Pregnant women or ones that have just
given birth;
Patients with malignant tumors;
Patients with heart disease；
Persons with poor blood circulation such as
a diabetic patient;
Otherwise discomfort or even physical injuries may occur.
Any one with spinal or nerve conditions;
Avoid falling asleep in this chair;
Persons with protrusion of intervertebral
disc;
Keep long hair away from moving massage
mechanism while in use.
Do not wear loose clothing or jewelry as it
might get caught with massage
mechanism;
Osteoporosis patients, spinal fracture
patients or persons with acute painful
disease or injuries such as joint sprains or
muscle strains;
Before operating or adjusting the chair, be sure that there are no obstructions that can cause
damage to your chair. No pets or persons, near, in front or under the chair to avoid serious injury.
Before using the chair, look behind the backrest pad and inspect the area where the massage
rollers travel up and down for any tearing or abnormal wear. Be sure the middle nylon cover is not
unzipped and has no signs of damage or tear caused by the roller heads. Using the chair while the
roller heads are exposed could cause physical injury, electrical shock or breakage.
When using the chair for the first time, it is recommended that you select the “Demo” mode to get
familiar with various massage features of the chair.
Do not use the chair for more than 30 minutes each time.
Do not massage a single part of your body for more than 5 minutes.
After using the chair, it is recommended that the chair is unplugged from the power outlet to avoid
any surges caused by outages. It is HIGHLY ADVISABLE TO ALWAYS USE A SURGE PROTEC-
TOR. Keep children or minors from using the chair without supervision to avoid misuse that could
result in serious injuries.
Follow the local code and regulations about use of electrical products。
Use a 110V-120V, 60Hz power supply.
(Do not use the chair in a country this product is not designed for or connect it with a transformer.)
It may lead to electrical shock, product failure or internal components overheating causing fire
hazard.
Make sure the power cable is firmly plugged into the outlet to avoid power surges, short and
electrical shocks. Electrical shocks may cause internal component overheating causing fire
hazard.
In the case of any abnormality with functions of the chair, stop using the chair immediately and
pull out the power plug to avoid smoke, fires and electric shocks.
Abnormality and fault examples are:
If the chair is plugged in and the power switch is in the “ON” position and if the chair is not
responding.
When the chair is turned off but still operating.
If you detect any burning smell or abnormal sounds.
If you detect any parts of the upholstery that seemed to have melted due to over heating.
In any of these listed issues have occurred STOP using the product and unplug from the power
outlet. Have the product inspected by an authorized service center.
Wipe and clean the power plug regularly with dry cloth to avoid dirt or moisture built up.
Do not put any cushions or obstructions between the backrest pad and the backrest. This may
damage the mechanism and result in personal injury.
When moving or handling the chair, be sure to hold onto the recommended supported area. Other-
wise parts of the chair may break resulting in serious injury.
Failing to follow these instructions, discomfort or even physical injuries may occur.
→

4
People with the following health issues should NOT use this chair:
Persons for whom massage is not advisable by doctors. Such as persons with thrombosis,
serious aneurysm, acute venous aneurysm, various skin inflammations (such as subcutaneous
tissue inflammation) or various skin infections.
Otherwise it may aggravate or cause serious injury.
Do not put hands, arms or feet into the traveling massage mechanism while the chair is operating.
Keep small children away from the chair. Climbing could result in falls that could lead to serious
injuries.
Do not climb onto the backrest or the armrests.
Do not apply excessive pressure leaning back on the backrest.
Keep your head away from reachable areas of the backrest and the back cover.
Young persons or persons with physical disabilities that can not operate the chair on their own,
should not use this product or without supervision. Anyone with weaken physical conditions
should consult a doctor before using the chair.
When massaging the neck area, pay attention to the intensity of the massage and make sure it
does not hurt the neck muscles or nerves.
Anyone with physical injuries or poor health should NOT use this product.
Persons with acute lumbago, protrusion of intervertebral disc or displacement of a lumbar
vertebra.
Otherwise it may aggravate or cause serious injury.
Do not damage the power cord.
Do not damage, alter, bend, twist or use it with any extension cords. Do not place the power cord
close to a heater.
A damaged power cord may result in electric shocks, short circuit or fires.
Please consult with the retailer/dealer from which you bought the product or a designated autho-
rized service center about maintaining your power cord.
When engaging the heat function of massage wheels, avoid prolong contact with the skin in one
position. Otherwise low-heat burns may occur.
Even if the temperature is relatively lower at 104 F~140 F, low-heat burns may happen in spite of
no obvious hot or painful sensation.
Do not insert or pull out the power plug when your hands are wet. Otherwise electric shocks may
happen.
Do not refit, disassemble or repair the product without the help of an authorized service provider.
Otherwise fires, abnormal movements or personal injuries may happen.

5
The following persons (even if they are physically healthy at present) should consult a physician
before using the product.
(1) Persons with muscular atrophy;
(2) Persons with any spinal or back pain or spinal condition;
(3) Persons suffer from sprains or bruising easily;
(4) Persons with motion sicknesss;
(5) Persons who received a heart operation or another vascular operation.
It may cause serious injury if not addressed properly.
Otherwise, it may cause serious injury.
Before sitting on the product, make sure there is no foreign objects obstructing any part of the
chair.
Before sitting on the seat, make sure the massage wheels are in the retracted positions.
Turn off the massage function before you get off the chair.
When the lower leg/foot massage section is not retracting after the massage, retract the footrest
with the remote button.
When unplugging the chair, hold onto the head of the to plug and not the cord to avoid damaging
to the power cord. Damaged cord could result in shock and serious injuries.
Before moving the chair, be sure the backrest is in the upright position and the footrest is
retracted in default positions.
Otherwise, injuries may happen or damage to the chair.
When moving the product by dolly, lay mats on the floor to avoid markings or damage to the floor.
Do not roll the chair on engineered wood or soft wood floorings. Otherwise marks and damage
may occur.
Keep the safety lock key.
Keep children away the remote control.
Before moving the chair, make sure there are no obstructions around. If lifting is required, make
sure to lift from the steel frame of the chair. Be sure to keep the chair in the upright position when
lifting the chair when moving.
Symptoms such as skin inflammation, itching or swelling when using the chair, stop the using the
product immediately and consult a physician.
Do not use the product with other electrical devices at the same time, such as a heating blanket.
Do not place your hands, arms, feet or any parts of your body to massage area that are not
designed for the body parts to avoid discomfort or injuries.
Do not put the knees between the calf massager. This may cause serious injury.
Do not fall asleep while using the product.
Do not use the product after drinking alcohol.
If the airbag on the seat is not completely deflated, do NOT attempt to deflate the air bag by force
or using any tools. Contact the manufacturer to resolve the matter.
(Make sure there are no foreign objects on the back cover, the backrest, the seat surface, the lower
leg/foot massage section or inside surface of the back cushion.)
Otherwise, accidents or injuries from product failure may cause serious injury.

6
Do not put hands or feet between footrest and seat base.
Do not put hands or feet between footrest and side panel.
Do not put hands or feet between seat base and side panel.
Do not put hands or feet between the upper and the lower part of the footrest.
Do not put hands or feet in the gap of seat base.
Do not put pets on the massage chair.
Do not pull out the power plug or turn off the power switch suddenly during massage operation.
Do not stand or sit on the backrest. This may lead to serious injury and damage to the product.
Do not stand or sit on the armrests.
Do not stand or sit on the lower leg/foot massage section or the footrest.
Do not drag or push the product after it is installed.
Do not move the product while there is a person sitting on it.
Do not use the product with other heating devices such as electric blankets.
Otherwise fires may occur due to overheating.
Do not leave the remote controller on the seat, always return it to its holder.
If there are any foreign objects between the backrest and the backrest pad, stop using the chair and
turn off. Remove the foreign object and make sure the chair is operating properly before using
again.
Do not place this chair in locations with high humidity such as the bathroom. Moisture will destroy
electrical components resulting in product failure or worst, electrical shock and other serious
injuries.
Do not use any liquid aerosol sprays around the chair. Otherwise, electric shocks, fire, short circuit
or product failure may happen.
Before cleaning or maintaining the product, always unplug the power cord.
In the case of a power failure, pull out the power plug at once. It is highly recommended to
plug chair into a surge protector to protect the chair from shorting during outages.
When the product is not in used, pull out the power plug.

7
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for the electric current to reduce the risk of
electric shock. This product is equipped with a cord with an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
Danger-Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly grounded. Do not modify the plug provided with the
product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Grounding Pin
Grounded Outlet
Grounded Outlet Box

8
Back Cushion
Side Panel
LED
Bluetooth Speaker
Pillow
A.I.Care
Footrest

73.2”
13.4”
2.4”
9
PLACE THE CHAIR
Do not expose the product directly under the sunlight or in a high-temperature place
Installation position

Do not bend or twist the power cord for any
reasons.
Do not place the power cable under heavy objects
such as the chair itself. Keep the power cord away
from any heating sources such as the heater vents,
motors and anything that may generate heat.
10
O
Make sure the plug is
in the chair port. The power line
must remain untangled to avoid
damage.
fully inserted

11
Make sure the massage rollers are in the proper position
If the rollers are not at the top of the
backrest in the proper positioin, press
“ON” button to bring back to the default
position.

2
portion
wear.
Even if the fabric is slightly damaged, stop
using the product immediately. Pull out the
power

13
Touch Screen
Pause
ON/OFF
Operation Guide

14

15
Auto programs:
Touch this icon, the screen will turn to the 〔Auto programs〕page.
There are 12 auto massage programs. Select one of them to start the massage.
-Rejuvenate : Focus on full body, various massage ways will let whole body feel relax.
-Shiatsu : The muscles around your neck and lower back will be loosened by a combination of soft
kneading and strong tapping.
-Swedish : The muscles around your lower back, waist, hips will be loosened by kneading, clapping,
and swedish.
-General Wellness : Specially designed for the aged, massage with soft kneading and soft clapping
-Deep Tissue : This program will start kneading and tapping to relieve stress on neck and full body.
-Gentle Touch : This program will start with slow kneading massage, let your body feel comfort.
-Sports : The program will be especially effective in reducing muscle aches and fatigue.
-Relax : This program will start with kneading and tapping massage for waist and lower back area.
-Neck & Upper Back : Targeting the neck, and reducing neck muscle aches and fatigue.
-Hip Flexor : Target at waist and hip, and reducing muscle aches and fatigue.
-Thai : This program will stretch the body fully.
-Sleep : Gentle relaxtion session based on soft kneading helps you to fall asleep.
Foot Roller:
• Press once to activate the roller massage. Press again to stop the roller massage.
Heating:
Touch this icon to turn off the heating from the rollers. Touch again to turn it on.
In auto massage mode, the heating will set to default.
3D Mechanism:
• There are 6 adjustable levels for the 3D mechanism intensity.
In auto massage mode, the mechanism intensity will set to default.
Adjust:
• Intensity/ Strength/ Speed: There are 5 different levels for adjustment.
3D+ Sonic Massage:
• Press once to activate high frequency tapping. Press again to stop tapping.
NOTE:
techniques.

16

17
A.I. Care(artificial intelligence care)
• Touch the A.I. Care icon. Then the screen will turn to the next page showing you how to detect
your health pro.
• You need to lean completely back and keep the palm of your hand on the sensor to make sure all
the testing points are covered. Press the button to start detection.
• You'll be prompted to firmly press your palm against the electro plate, do not remove your palm until
you receive the Health Pro diagnostics screen.
• The screen will show your health condition: either light, medium or heavy. The chair will generate
massage programs automatically according to your health condition scanning status.
NOTE:
• In order to use A.I. Care properly to scan your body, you must lean against and make good contact
with the electro plates of the body pain detector or it will stop and scanning will fail. The scan will
need to be restarted.

18
Customization
• User can design massage program for themself, then save the program for their another use.
• Firstly open Advanced, then edit massage program(Manual Massage, Air Massage, Area
Massage), then touch to save the program as User X. And you can also re-edit directly
User X.
Customization can save User 1, User 2, User 3, User 4. If you want to save a new program,
controller will remind you Customization is full, to override other customization.
Note
Foot Roller:
• Press once to activate the roller massage. Press again to stop the roller massage.
Heating:
Touch this icon to turn off the heating from the rollers. Touch again to turn it on.
In auto massage mode, the heating will set to default.
3D Mechanism:
There are 6 adjustable levels for the 3D mechanism intensity.
In auto massage mode, the mechanism intensity will set to default.
Adjust:
Intensity, Strength and Speed: There are 5 different levels for adjustment.
3D+ Sonic Massage：
Press once to activate high frequency tapping. Press again to stop tapping.

19