Osaki Pro Admiral User manual

AUTO
ON/OFF Button
Touch screen
(Operation main page)
Touch keys
14

Press this key to start the massage chair. Backrest and footrest of the massage
chair are automatically adjusted to the default angle. The remote control enters
the operation main page.
Press this key again. Massage function stops. The massage mechanism, backrest
and footrestrestore to its original position. The massage chair is turned off.
There are 6 massage functions available:
• Auto
• Manual
• Local
• Air Massage
• Avanced
• Settings
Position: Press to adjust angles of the massage chair and Zero Gravity position.
Operation Main Page: Press to return to the operation main page.
Pause
press this button to stop all the funations immediately
button light will be on when pause function is activated
please press again to case pause function before using any other functions
AUTO: Press to start ‘Auto’
massage function （Press to start the auto massage program of Office PRO.).
3. The manual controller is described as follows
Operation Main Page
AUTO
Operation Main Page
Pause
AUTO
Position

1.Select 'Auto' function on the operation main page.
2.There are 15 massage modes to select from.After the selection, relevant massage
starts. The remote control enters 3.the adjustment page.
4.Body scanning will commence when the program is selected . ( Screen will show
Scanning ）.
5.Please sit as far back in the seat as possible with your head on the pillow during
the scanning
1 . 3D : Touch3D to adjust 3D massage intensly ( 6 levels)
2 . Strength : Touch Strength to adjust Kneading strength ( 5 levels)
3 . Speed : Touch Speed to adjust Tapping speed ( 5 levels )
4 . Intensity : Touch Intensity to adjust air massage intensity ( 5 levels )
‘Auto’ Massage
Adujstment notes
16

1.Select ‘Manual’ function on the operation main page.
2.There are 15 massage modes to select from.After the selection, relevant massage
starts. The remote control enters 3.the adjustment page.
4.Body scanning will commence when the program is selected.(Screen will show
Scanning).
5.Please sit as far back in the seat as possible with your head on the pillow during
the scanning.
There are 2 modes for Kneading,Tapping,K & T,Shiatsu and Clapping.Press
once When user goes to other operation page,it will return to the current massage
page to enter mode 1.Return to previous menu and press again to enter mode 2
after 10 minutes of user inactivity.
‘Manual’ Massage
Note
17

1.3D : Touch 3D to adjust 3D massage intensity(6 levels)
2.Strength : Touch Strength to adjust Kneading strength(5 levels)
3.Speed : Touch Speed to adjust Tapping speed(5 levels)
4.Width : Touch Width to adjust Rolling width(3 levels)
5.Spot : Touch Spot to activate spot massage
The massage roller will spot on the position it goes when user press the button
Press again to cease spot massage.
6.Partial : Touch Partial to activate partial massage
The massage roller will go up and down in a range of approx 3.2 "Press again to
cease partial massage.
Adujstment notes
18