OST iConverter User manual

iConverter®
1-Module Passive Chassis
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: [phone]; Fax: [phone]
Page 2
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights reserved. The
whole or any part of this publication may not be reproduced, stored in a retrieval system,
translated, transcribed, or transmitted, in any form, or by any means, manual, electric,
electronic, electromagnetic, mechanical, chemical, optical or otherwise, without prior explicit
written permission of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPointTM,
FlexSwitchTM, HybridNID®, iConverter®, miConverterTM, NetOutlook®, OmniLight®,
OmniConverter®, RuggedNet®, Omnitron Systems Technology, Inc.TM, OSTTM and the
Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice. Omnitron
Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the original
purchaser (Buyer) against defects in material and workmanship for a period of two (2) years
from the date of shipment. The warranty for the network product can be extended to lifetime
by registering the product at www.omnitron-systems.com/support within ninety (90) days
from the date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a product
with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s
expense. Omnitron will pay the shipping charge to return the product to Buyer’s designated
US address using Omnitron’s standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from improper or
inadequate use and/or maintenance of the equipment by Buyer, Buyer-supplied equipment,
Buyer-supplied interfacing, unauthorized modifications or tampering with equipment
(including removal of equipment cover by personnel not specically authorized and certied
by Omnitron), or misuse, or operating outside the environmental specication of the product
(including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or
improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specically disclaims the implied
warranties of merchantability and tness for any particular purpose.
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall
not be liable for any direct, indirect, special, incidental, or consequential damages, whether
based on contract, tort, or any legal theory.
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in accordance with
the Waste Electrical and Electronic Equipment Directive (WEEE Directive) of the European
Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE)
which, together with the RoHS Directive 2015/863/EU, for electrical and electronic equipment
sold in the EU after July 2019. Such disposal must follow national legislation for IT and
Telecommunication equipment in accordance with the WEEE directive: (a) Do not dispose
waste equipment with unsorted municipal and household waste. (b) Collect equipment waste
separately. (c) Return equipment using collection method agreed with Omnitron.

Page 4
iConverter®
1-Module Passive Chassis User Manual
Product Overview
The 1-Module iConverter Passive Chassis supports a single iConverter CWDM module and
is not equipped with an internal power supply.
1-Module Chassis with CWDM Module Installed
Chassis Model Number 8244-0
Wall-Mount Hardware Kit 8249-0
DIN Rail Mounting Kit 8250-0
Refer to the User Manuals for the mounting/hardware kits for detailed installation instructions.
Wall and Rack Mounting
The 1-Module Passive chassis can be wall/rack mounted by attaching the optional wall/
rack mount brackets (8249-0). A 19” Rack Mount Shelf (8260-0) is available to install two
1-Module chassis.
Installing this equipment into a rack in such a way as to make it unstable may cause injury
or death. Always make sure that the rack you are installing this equipment into is properly
secured, stable, balanced and designed to carry the weight and weight distribution of this
equipment.
Never use this equipment to carry any weight except its own. Never use it as a shelf to
support the weight of other equipment.
Installing Module
Carefully slide the module into the open slot in the chassis. Align the module with the
installation guides and ensure that the module is rmly seated against the backplane. Secure
the module by fastening the front panel thumbscrew (push in and turn clockwise to tighten)
to the chassis front.
NOTE: A safety ground attachment is provided on the rear of the chassis. Use the
provided ground screw to attach a safety ground.
040-08244-001B 10/22
The equipment is marked with the WEEE symbol shown to indicate that it must be
collected separately from other types of waste. In case of small items the symbol may be
printed only on the packaging or in the user manual. If you have questions regarding the
correct disposal of equipment go to www.omniton-systems.com/support or e-mail to Omnitron
at [email protected].
Customer Support Information
Phone: [phone]
Fax: [phone]
Address: Omnitron Systems Technology, Inc.
38 Tesla
Irvine, CA 92618, USA
Email: [email protected]
URL: www.omnitron-systems.com
Page 3