Oster 5858 User manual

When using electrical appliances, to reduce the risk of fire, electric
shock, and/or injury to persons, basic safety precautions should
always be followed, including the following:
l READ ALL INSTRUCTIONS, PRODUCT LABELS AND
WARNINGS BEFORE USING THE BREADMAKER.
l Do not touch hot surfaces. Always use oven mitts when
handling hot materials, and allow metal parts to
cool before
cleaning. Allow the breadmaker to
cool thoroughly before
putting
in or taking off parts.
l When unit is not in use and before cleaning, unplug the
breadmaker from wall outlet.
l To protect against risk of electrical shock, do not immerse the
appliance or plugs
in water or other liquids.
l Close supervision is always necessary when this or any
appliance is used by or near children, or incapacitated
persons.
l Do not allow anything to rest on the power cord. Do not plug
in cord where people may walk or trip on it.
l Do not operate this or any appliance with a frayed or
damaged cord, or plug, or after the appliance malfunctions or
is dropped or has been damaged in any manner. Take
appliance to the nearest Authorized Service Facility for
examination, repair or electrical or mechanical adjustment.
l Do not let the cord dangle over the edge of a table or counter
or touch hot surfaces. Do not place on an unsteady or cloth-
covered surface.
l Avoid contact with moving parts.

l Do not use attachments not recommended by the
manufacturer; they may cause fire, electric shock or injury.
l Do not use outdoors or for commercial purposes.
l Do not place the appliance near a hot gas or electric burner,
or
in a heated oven.
l To unplug, press the “STOP” button, grip plug and pu11 from
wall outlet. Never
pull on the cord.
l Use of Extension Cords: A short power supply cord has been
provided to reduce the risk of injury resulting from becoming
entangled in or tripping over a longer cord. Extension cords
are available from hardware stores and may be used with
care. If used, the extensi’on cord must be at least 10 amps
and 120 volts. The cord should be arranged so that it will not
drape over the counter or tabletop where it can be pulled by
children or tripped over accidentally. If the appliance is of the
grounded type, the extension cord should be grounding-type
3-wire cord.
l Electrical Power: If electric circuit is overloaded with other
appliances, your breadmaker may not operate properly.
The breadmaker should be operated on a separate electrical
circuit from other operating appliances.
l Do not use appliance for other than intended use, This
appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is
intended to fit into a polarized outlet only one way. If the plug
does not fit
fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
THIS BREADMAKER Is FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

Table of Contents
Important Safeguards ......................
.. ... 2
Table of Contents.. .....
...
.......................
4
Overview of Breadmaker Features
....
...
....
............
6
-, .. ..
..
...
Using the Delay Timer .............................
7
Breadmaker Settings ...............................
8
Tips and Hints .................................... 9
Baking at High Altitudes ............................ 10
LearningAbout Your Breakmaker .....................
. ... ll
Taking Care of Your Breadmaker .................
....11
Troubleshooting .........................
.
.........
12
Recipes
.....................................
...14
Basic ......................... ....
............
.14
ExpressBakee Setting: Bakiig Bread In Under 1 Hour ......
15
. .
. .
ExpressBakee ..............
.
....................
17
Whole Wheat
..
.................................
18
.
French ........................19
Sweet....................................20
Quick
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Dough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...22
Warranty Information
. . . . . . . . . . . . . . . . .....................23

Learning About Your Breadmaker
2
4
6
7
8
. 9
. 10
. ll
. 11
, . 12
. . 14
. . 14
. . 1.5
. . 17
. .18
. . 19
. . .20
. ..21
. . .22
. . .23
1. Place the breadmaker on a counter
where the plug will reach an outlet.
DO NOT plug the machine into the
wall outlet yet. You will be shown later
when to do this.
Make sure you can open the breadmaker
top without hitting the top of kitchen
cabinets.
2. Open the lid and remove the bread pan.
To do this, simply grasp the handle of
the pan and pull straight up. Use a gentle,
non-abrasive soap and wash, rinse and
dry the pan thoroughly.
3. Attach the kneading blade to the bread pan,
as shown. You will find the kneading blade
in a small plastic wrap attached to the
power cord.
4. Set the bread pan aside. Do not yet
place the pan into the breadmaker.
Important After a baking cycle, the
bread machine will not
operate until it has cooled
down.
Important The breadmaker has an
automatic “keep warm”
setting that will keep your
bread warm for up to.one hour. To turn warmer off,
press the “StartfStop” button and
hold until you hear
a beep.
Important Do NOT press the “Start/Stop” button while the
breadmaker is making bread. This will cause
the machine will turn off and you will need to start
over again, from scratch.
Caution: The breadmaker is very hot. Do not handle the machine
while it is operating. Do NOT lift the lid
while the
breadmaker is baking bread.

Overview of Breadmaker Features
1 Menu
Press this button to select the kind of bread you want to make.
Each time you press the button you will hear a beep. The display
shows a number for each setting. For example, Basic is 1,
Whole Wheat is 2, French is 3, etc.
2 Crust Color Button
The Crust Color button allows you to choose how light or dark to
make the crust of the bread. Each time you press the Crust Color
button the display will change as follows:
L-Light
= LP-Medium
= P H-Dark = H
In addition, the display will show the cycle number before the crust
color setting. For example, the Basic with a Medium crust reads “1P.”
Or the French bread setting with a dark crust reads “3H.”
3 Display /
The Display shows the following settings:
l The number of the bread setting cycle
l The crust color setting
l The time remaining while your bread is kneading or baking
Once you press the “Start/Stop” button to begin, the display l
will show the remaining time until your bread is baked.
When the display reads “0:OO” the bread is baked.
4 Timer Set Buttons
Press these buttons to delay the time for your breadmaker to start.
For example, you can time your bread to be ready for dinner,
or to bake while you are sleeping. You may delay up to 13 hours.
5
Start/Stop Button
Press this button to start and stop your breadmaker or begin
countdown for delayed baking bread. If delay bake is selected,
the remaining time will count down
in one minue increments.

Using the Delay Timer
You can delay the time your breadmaker starts to have fresh bread
ready when you get up
in the morning or when you come from work.
We recommend that before you use the Delay Timer, you try out a few
recipes. Use recipes that have produced good results for you
in the past.
Important: You cannot use the Delay Timer
for
ExpressBake@=’ settings.
Before Using the Delay Timer:
1. Add al1 recipe ingredients to the bread pan.
2. Select the correct setting for the kind of bread you are making.
3. Select the crust color.
Caution: Do not use recipes with ingredients that can spoil
like eggs or milk.
4. Determine how many hours and minutes there are between now
and when you want final, baked bread.
5. Use the “Timer Up” button to advance the time in 10 minute
increments. If necessary, use the “Timer Down” button to decrease
the time. (To advance the time quickly, simply press and
hold
down the “Timer Up/Down" buttons.)
Important: If you make a mistake or wish to start over, press
and hold down the "Start/Stop" button
until you
hear a beep. The display will show the original
setting and cycle time. The Delay Timer is canceled
and you can start again.
6. When the Delay Timer is set where you want it, make sure to
press the “Start/Stop” button. The colon ( : ) will flash and your
bread will be ready when you planned.
Important: When using the Delay Timer during times of hot
weather, you may wish to reduce the
liquid in your
recipe by 1 or 2 tablespoons. This is to prevent the
dough from rising too much. You may also reduce
the Salt by 1/8 or 1/4 teaspoon and try cutting the
amount of sugar you use by 1/4 teaspoon at a time.

1 Basic (3 Hours)
This setting is probably used more than any other because it gives
you the best results with just about any recipe.
2 Whole Wheat (4 Hours, 10 Minutes)
The whole wheat setting offers a longer rise time for breads that
contain more then 50% whole wheat flour.
3 French (3 Hours, 50 Minutes) /
Use this setting for making French breads. French bread takes longer
to knead, rise and bake, providing a heartier crust.
4 Sweet (2 Hours, 50 Minutes)
The sweet setting is for baking breads with high amounts of sugar,
fats and proteins, al1 of which tend to increase browning.
5 ExpressBake@ (58 Minutes)
Use this setting for baking bread in under 1 hour; this setting
will only bake 1.5lb. size loaves.
6 Quick (1 Hour, 43 Minutes)
Use this setting for recipes that contain baking powder or baking
soda rather than yeast to make bread or cake rise; only specially
designed recipes are to be used for this setting.
7 Dough (1 Hour, 30 Minutes)
This setting lets you prepare dough for rolls, specialty breads, pizza, l
etc., which you shape by hand, allow to rise, then bake
in a conventional oven.
8 Bake (1 Hour)
This setting is for baking dough that you may have prepared without
using the previous settings.

Tips and Hints
Experienced cooks consider breadmaking to be as much art as science.
Keep in mind that some recipes may require a little experimentation
before they are exactly the way you want them. Just dont give up.
Still, there are special hints to ensuring quality bread almost every time.
Use Exact Measurements
Leve1 off al1 dry ingredients and make sure
that al1 liquid ingredients are measured in a
glass cup with the markings clearly labeled on
the side.
Use Fresh Ingredients
You should always use fresh ingredients. The reasons are:
l Flour. If you have stored your flour for a long time, it may have
become wet from absorbing moisture, or dry, depending on the
area of the country in which you live. We recommend using fresh
bread flour.
l Yeast. Fresh yeast is probably the most important ingredient
in baking bread. If the yeast is not fresh, your bread may not rise.
It is better to buy new yeast than to take a chance on yeast that
has been stored for a long time.
You can test the freshness of your yeast. Simply fil1 a cup with
warm water, then add and stir in 2 teaspoons of sugar.
Sprinkle a few teaspoons of yeast on the surface of the water and
wait. After 15 minutes, the yeast should foam and there should be
distinct odor. If neither reaction happens, the yeast is old and should
be thrown away.

Add Ingredients in the order given according to the recipe.
Read
al1 recipes from top to bottom, and remember:
- FIRST: liquid ingredients
- SECOND: dry ingredients
- LAST: yeast
Check the Doughball
You may need to adjust the consistency of the dough by adding a
little flour or a little water until the dough is just right. Check the
breadmaker when the clock reads 2:30. If the doughball appears
sticky or too wet, sprinkle
in a little flour, a tablespoon at a time
until the dough appears smooth. If the doughball is too dry,
or you hear knocking sounds, sprinkle
in water a teaspoon
at a time until the doughball appears round and dry.
For Baking at High Altitudes
To compensate for high
altitude baking, we recommend
the following:
If the Dough
Is Too Dry
lincrease the amount of water to the recipe, sometimes as much
as 2
- 4 Tbsp. per cup.
If the Bread Rises Too High
lreduce the amount of yeast. For each tsp. of yeast,
try reducing the yeast by 1/8 to
114 tsp.
lreduce the amount of sugar. For each Tbsp. of sugar,
reduce the amount by 1 to 2 tsp.

Taking Care of Your Bread Machine
General Cleaning
1. Remove
all bread crumbs by wiping them away with a slightly
damp cloth.
2. DO NOT bend the heating element which is located on the inside
of the breadmaker.
Cleaning the bread pan and Kneading Blade
1. Wipe the bread pan and kneading blade with a damp cloth
and dry completely.
2. DO NOT wash the pan or parts
in the dishwasher. Surely this
will damage the finish of the pan and the other parts.
Cautionr Do not put the breadmaker in water or in a dishwasher.
Do not use benzene, scrubbing brushes or chemical
cleaners as these will damage the machine.
Use only a mild, non-abrasive cleanser to clean the breadmaker.
Caring for Your Breadmaker
1. Keep your breadmaker clean at
all times.
Caution: Do not use metal utensils with the breadmaker.
This will damage the non-stick pan and other parts.
2. Don’t worry if the color of the bread pan changes over time.
The color change is a result of steam and other moisture
and does not affect the machine’s performance.
3.
If you have trouble removing the kneading blade, place warm water
in the bread pan for 10 - 15 minutes and this will loosen the blade.
Storing Your Breadmaker
1. Make sure the machine is clean and dry before storing.
2. Store the breadmaker with the lid closed.
3. Do not place heavy objects on the lid.
4. Remove the kneading blade and place inside the bread pan.

Troubleshooting
If you are unable to find a solution, please call our Consumer
Relations Department at l-800-458-8407.
burning odor from the back
of the machine.
and into the machine itself. Stop the breadmaker
ff. Clean the breadmaker
rhe bread has a floured top.
rhe bread
is too brown.
The bread is not brown enough
The sides of the bread collapse
and the bottom of the bread
is damp.
This
is usually a result of using too much flour
or not enough water. Try using
less flour
(a tsp. less at a time), or try using more water
(1/4 tsp. more at a time).
This is usually the result of adding too much
sugar to the recipe. Try using less sugar
(1 Tbsp. at a time). You can also try selecting
a lighter crust color selection.
This is usually the result of repeatedly lifting
the lid of the bread machine or leaving the lid
open while the bread
is baking. Be sure the
lid is shut while the breadmaker is in operation.
You can also try selecting a darker crust color
selection.
There are
several possible solutions. The bread
may have been left in the bread pan too long
after baking. Remove the bread from the pan
sooner and allow it to cool. Try using more
flour (a tsp. at a time), or
less yeast (1/4 tsp.
ata time), or less water or liquid (a tsp. at a
time). This could also be the result
of forgetting to add salt to the recipe.

r
r
-
-
lid
In.
Br
-
!ad
w3
an
3
-
‘he bread has a heavy,
hick texture.
-he bread is not baked
:ompletely in the center.
rhe bread has a coarse texture.
rhe bread rose too much.
‘he bread did not rise enough.
Try using less flour (a tsp. at a time), or more
yeast (1/4 tsp. at a time). This could also be the
result of using
old flour or the wrong type of
flour for the recipe.
Try using more flour (a tsp. more at a time),
or
less water or liquid (a tsp. less at a time).
DOnot lift the lid too often during baking.
This
is usually the result of forgetting to add
salt to the recipe.
Try using
less yeast (1/4 tsp. less at a time).
This could also be the result of forgetting to
add salt to the recipe or forgetting to put
the kneading blade into the bread pan.
There are
severa1 possible solutions. Try using
less flour (a tsp. less at a time), more yeast
(1/4 tsp. more at a time), or less water (a tsp.
less at a time). This could also be the result of:
l forgetting to add salt to the recipe
l using old flour or the wrong kind of flour
for the recipe
l using old yeast
l usíng water that is too hot (except
otherwise noted in the recipes and
for ExpressBake” setting recipes).

Basic Setting Recipe
Homestyle White Bread
MAKES ONE 1-lb LOAF
3/4 cup + 2 Tbsp. water (7585°F)
l-1/2 Tbsp. butter or margarme, softened
l-1/2 Tbsp. sugar
1
Tbsp. non-fat dry milk powder
l-1/2 tsp. salt
3
cups bread flour
l-1/2 tsp. bread machine yeast
1. Spray the bread pan and kneading blade with non-stick cooking spray.
Attach the kneading blade in the bread pan. Place ingredients in the bread
pan in the following order: water, butter, sugar, milk powder, Salt and flour.
2. With finger, make a small indentation at one
side of the flour.
Add yeast to indentation, making sure it
does not come in’contact
with the liquid ingredients.
3. Insert bread pan into breadmaker; gently
close lid. Plug the power cord into
a wall unit. Press the Menu Button until the “Basic” program is reached.
Press the “Loaf” button and set it for l-1/2 lb. loaf. Press the “Crust Color”
button for the desired crust color. Press the Start button.
4. When the machine beeps, indicating that program has finished, lift the lid and,
using oven mitts, firmly grasp the bread pan handle and gently pull the pan
straight up and out of the machine. Unplug the breadmaker and let cool.
cwc
AUTION: The breadmaker and pan may be very hot!
Always handle with care.
5. If needed, use a non-stick spatula to gently loosen the
sides of the bread
from the pan; turn bread pan upside down onto a wire cooling rack and
gently shake until bread falls out onto rack.
6. Turn bread right-side up on rack and
coo1 about 20 minutes before slicing.
IMPORTANT: After a baking cycle, the bread machine will not operate until
it has cooled down.

i
x.
1to
or”
.nd,
an
‘ES
il
ExpressBake@ Setting: Making Bread
In Under 1 Hour
Your OSTER” breadmaker can
bake great bread
in under 1 hour.
This is called the “ExpressBake@”
setting. ExpressBake@ loaves are
a little different from loaves baked
on other settings.
ExpressBake@ Setting:
l This setting can bake bread in 58 minutes. The bread is a little
more dense
in texture with this setting.
l The ExpressBake@ setting will only make a 1.5lb. loaf.
There are a few things you should know about the ExpressBake@
settings that are different than the other settings.
l ExpressBakeB breads tend to have a darker, thicker crust
than other kinds of bread. Sometimes there will be a crack
in
the top of the crust. This is because baking is done at higher
temperatures. They also tend to be shorter, denser loaves.
l You CANNOT use the Delay Timer for the ExpressBake@ settings.
This would
cool the liquid ingredients and affect the way that
the bread rises.
l You CANNOT use the “Crust Color” option for ExpressBake@
breads.
.DO NOT open the cover while making ExpressBake@ breads.
l If the loaf is hard to remove from the pan, let it sit for about
5 minutes to cool. Gently shake the bread out of the pan and
wait for 15 minutes before slicing.
l If you wish to bake another loaf of bread, you must let
the breadmaker
co01 for 20 minutes with the cover open.
l YOU CAN use standard bread mixes for ExpressBake@ breads,
but the results may not be as good as the results when using
the recipe within this manual.

Yeast
Always use a fast-rising yeast. DO NOT use
active dry yeast for ExpressBake@ settings
because the loaves will be much shorter
when baked.
11)
15
Liquids ml
Always use hot water in the range of ll.S”-125”F/46”-52°C.
You must use a cooking thermometer to gauge the temperature;
hotter water can kill the yeast while cooler water may not activate it.
Salt
As a rule, you should use
LESS salt for ExpressBakeB bread?.
Less salt provides you with a higher loaf. Make sure to follow
the recipe suggestions in this booklet for best results.
Other Ingredients
Make
sure al1 other ingredients (like flour, sugar, dry milk, butter, etc.}
are at room temperature.
Always use bread flour for the ExpressBake@ settinas.
Things You May Need to Buy
l You should only use “Bread Machine”
flour for the ExpressBake@ recipes.
l You may need a cooking thermometer
to measure the temperature of the water
you use in these recipes. You should
only use hot water (between 115°F
and 125°F OY 46” and SZT)
for ExpressBakeB recipes.
Although baking ExpressBake@ bread is a
little different, the results and convenience
are well Worth it.

ExpressBake’ Setting Recipe
ExpressBake@ Toasting-Style White Bread
MAKFS ONE 1.5Ib LOAF
The ExpressBake” program produces a slightly denser bread
that
is perfect for toasting.
1 cup + 2 Tbsp. hot water (115125°F)
2 Tbsp. canola or vegetable oil
2 Tbsp. sugar
1 tsp. salt
3
cups bread flour
5 tsp. bread-machine yeast
1. Spray the bread pan and kneading blade with non-stick cooking spray.
Attach the kneading blade in the bread pan. Place ingredients into the bread
pan in the following order: water, oil, sugar, salt and flour.
2. With finger, make a small indentation at one
side of the flour. Add yeast
to indentation, making sure it does not come in contact with the liquid
ingredients.
3. Insert bread pan into breadmaker; gently
close lid. Plug the power cord
into a wall outlet. Press the Menu button until the “ExpressBake@”
program is reached. Press the start button.
4. When the machine beeps, indicating that program has finished, lift the lid
and, using oven mitts, firmly grasp the bread pan handle and gently pull the
pan straight up and out of the machine. Unplug the breadmaker and let cool.
@FC
AUTION: The breadmaker and pan may be very hot!
Always handle with care.
5. If needed, use a non-stick spatula to gently loosen the
sides of the bread
from the pan; turn bread pan upside down onto a wire cooling rack and
gently shake until bread falls out onto rack.
6. Turn bread right-side up on rack and
cool about 20 minutes before slicing.

Whole Wheat Setting Recipe
Whole Wheat Bread
MAKES ONE 1.5lb LOAF
1 cup + 2 Tbsp. water (7585°F)
1 Tbsp. + l-1/2 tsp. butter or margarine, softened
1/4 cup firmly packed light brown sugar
l-1/4 tsp. salt
3-1/2 cups whole wheat flour
2-1/4 tsp. bread machine yeast
1. Spray bread pan and kneading blade with non-stick cooking spray.
Attach the kneading blade in the bread pan. Place ingredients in bread pan
in the following order: water, butter, sugar, salt and flour.
2. With fingen make a small indentation at one
side of the flour.
Add yeast to indentation, making sure it does not come in contact
with the liquid ingredients.
3. Insert bread pan into breadmaker; gently
close lid. Plug the power cord into
a wall outlet. Press the Menu Button until the “Whole Wheat” program
is reached. Press the “Loaf” button and set it for l-1/2 lb. loaf. Press the
“Crust Color” button for the desired crust color. Press the Start button.
4. When the machine beeps, indicating that program has finished, lift the lid
and, using oven mitts, firmly grasp the bread pan handle and gently pull
the pan straight up and out of the machine. Unplug the breadmaker
and let cool.
IGFC
AUTION: The breadmaker and pan may be very hot!
Always handle with care.
5. If needed, use a non-stick spatula to gently loosen the
sides of the bread
from the pan; turn bread pan upside down onto a wire cooling rack and
gently shake until.bread falls out onto rack.
6. Turn bread right-side up on rack and
cool about 20 minutes before slicing.

French Setting Recipe
Classic French Bread
MAKES ONE 1.5lb LOAF
1 cup + 1 Tbsp. water (7585°F)
2 tsp. sugar
3/4 tsp. salt
3-1/3
cups bread flour
2 tsp. bread machine yeast
1. Spray the bread pan and kneading blade with non-stick cooking spray.
Attach the kneading blade in the bread pan. Place ingredients in the
bread pan in the following order: water, sugar, salt and flour.
2. With finger, make a small indentation at one
side of the flour.
Add yeast to indentation, making sure it does not come in contact
with the liquid ingredients.
3. Insert bread pan into breadmaker; gently
close lid. Plug the power cord
into a wall unit. Press the Menu Button until the “French Bread” program
is reached. Press the “Loaf” button and set it for l-1/2 lb. loaf. Press the
“Crust Color” button for the desired crust color. Press the Start button.
4. When the machine beeps, indicating that program has finished, lift the lid
and, using oven mitts, firmly grasp the bread pan handle and gently pull
the pan straight up and out of the machine. Unplug the breadmaker
and let cool.
USC
AUTION: The breadmaker and pan may be very hot!
Always handle with care.
l5. If needed, use a non-stick spatula to gently loosen the
sides of the bread
from the pan; turn bread pan upside down onto a wire cooling rack
/and gently shake until bread falls out onto rack.
6. Turn bread right-side up on rack and
cool about 20 minutes beforebefore slicing.

Sweet Setting Recipe
Banana-Pecan Bread
MAKES ONE 1.5lb LOAF
1/2
cup + 1 Tbsp. water (7585°F)
3/4 cup mashed ripe banana, about 2 medium bananas
2 Tbsp. butter or margarine, softened
1 large egg, lightly beatea
3 Tbsp. sugar
l-1/4 tsp. salt
3-1/4
cups bread flour
2-1/4 tsp. bread machine yeast
1/2 cup chopped
pecans
1. Spray bread pan and kneading blade with non-stick cooking spray.
Attach the kneading blade in the bread pan. Place ingredients in bread pan
in the following order: water, banana, butter, egg,
sugar, salt then flour.
2. With finger, make a small indentation at one
side of the flour.
Add yeast to indentation, making sure it does not come in contact
with the liquid ingredients. Sprinkle nuts
over flour.
3. Insert bread pan into breadmaker; gently
close lid. Plug the power cord
into a wall outlet. Press the Menu Button until the “Sweet Bread” program
is reached. Press the “Loaf” button and set it for
l-l/2 lb. loaf. Press the
“Crust Color” button for the desired crust color. Press the Start button.
4. When the machine beeps, indicating that program has finished, lift the lid and,
using oven mitts, firmly grasp the bread-pan handle and gently pull the pan
straight up and out of the machine. Unplug the breadmaker and let cool.
tWC
AUTION: The breadmaker and pan may be very hot!
Always handle with care.
5. If needed, use a non-stick spatula to gently loosen the
sides of the bread
from the pan; turn bread pan upside down onto a wire cooling rack
and gently shake until bread falls out onto rack.
6. Turn bread right-side up
on rack and coo1 about 20 minutes beforebefore slicing.