oticon Alta2 Pro Ti User manual

miniRITE
Alta2 Pro Ti
Nera2 Pro Ti
Ria2 Pro Ti
Instructions for use

Model overview
This booklet is valid for Oticon miniRITE in the following hearing aid
families and models:
Alta2 Pro Ti Nera2 Pro Ti Ria2 Pro Ti
The following speakers are available for the above models:
Speaker 60
Speaker 85
Speaker 100
Power ex mould speaker 100
Introduction to this booklet
This booklet guides you in how to use and maintain your new
hearing aid. Please read the booklet carefully including the Warning
section. This will help you to achieve the full benet of your new
hearing aid.
Your hearing care professional has adjusted the hearing aid to meet
your needs. If you have additional questions, please contact your
hearing care professional.
About Startup Handling Options Tinnitus Warnings More info
For your convenience this booklet contains a navigation bar to help
you navigate easily through the dierent sections.

Intended use
The hearing aid is intended to amplify and transmit sound to the ear
and thereby compensate for impaired hearing within mild to severe-
to-profound hearing loss. The hearing aid is intended for use by adults
and children older than 36 months.
IMPORTANT NOTICE
The hearing aid amplication is uniquely adjusted and optimised to your
personal hearing capabilities during the hearing aid tting performed by
your hearing care professional.
Table of contents 1/2
About
Identify your hearing aid speaker and earpiece 8
Your hearing aid 10
Identify left and right hearing aid 12
Battery 13
Start up
Turn the hearing aid ON and OFF 14
When to replace a battery 15
Replace the battery 16
Handling
Caring for your hearing aid 18
MultiTool for handling batteries and cleaning 19
Put on the hearing aid 20
Standard earpieces: dome or Grip Tip 22
Replace dome or Grip Tip 23
ProWax miniFit filter 24
Continues on next page

Replace ProWax miniFit filter 25
Customised earpieces: Micro mould, LiteTip, or Power flex mould 26
Clean customised earpiece 27
Replace ProWax filter in customised earpieces 28
Options
Optional features and accessories 30
Mute the hearing aid 31
Change programs 32
Change volume 34
Tamper-resistant battery drawer 36
Wireless accessories 38
Other options 39
Tinnitus
Tinnitus SoundSupport™ (optional) 40
Guidelines for tinnitus sound generator users 41
Sound options and volume adjustment 42
Limitation on use time 45
Important information for hearing care professionals
about Tinnitus SoundSupport 46
Warnings related to Tinnitus 49
Warnings
Warnings 50
More info
Troubleshooting guide 54
Water resistant 56
Conditions of use 57
Warranty certificate 58
International warranty 59
Technical information 60
Table of contents 2/2

8 9
About Startup Handling Options Tinnitus Warnings More info
Speaker
(60 shown)
Ear grip
(optional)
60 85 100
Identify your hearing aid speaker and earpiece
This will make it easier for you to
navigate through this booklet.
Speakers
The hearing aid uses one of the
following speakers:
Earpieces
The speaker uses one of the
following earpieces:
Power ex mould speakers
* Please see details for replacing the dome or Grip Tip in section: Replace dome or GripTip
Micro mould or LiteTip
Grip Tip*
Dome* (open dome shown) 100
About