oticon Oticon Opn 2 miniRITE User manual

Instructions for use IIC-CIC-ITC
ITE HS-ITE FS
Oticon Opn
Oticon Siya

Model overview
This booklet is valid for the Oticon Opn™ and Oticon Siya families in
the following hearing aid models, battery sizes and styles:
Models:
Oticon Opn 1 Oticon Opn 2 Oticon Opn 3
Oticon Siya 1 Oticon Siya 2
Battery size:
10 312 13
Bluetooth®: Yes No
Styles:
IIC Invisible-In-the-Canal
CIC Completely-In-the-Canal
ITC In-the-Canal
ITE HS In-the-Ear Half Shell
ITE FS In-the-Ear Full Shell
Introduction to this booklet
This booklet gives you guidance on how to use and maintain your new
hearing aid. Please read the booklet carefully including the Warning
section. This will help you to achieve the full benet of your new
hearing aid.
Your hearing care professional has adjusted the hearing aid to meet
your needs. If you have additional questions, please contact your
hearing care professional.
About Startup Handling Options Tinnitus Warnings More info
For your convenience this booklet contains a navigation bar to help
you navigate easily through the dierent sections.

Intended use
The hearing aid is intended to amplify and transmit sound to the
ear and thereby compensate for impaired hearing within mild to
severe hearing loss. This hearing aid is intended for use by adults
and children older than 36 months.
IMPORTANT NOTICE
The hearing aid amplication is uniquely adjusted and optimised to your
personal hearing capabilities during the hearing aid tting performed by
your hearing care professional.
About
Identify your hearing aid style 8
Identify left and right hearing aid 12
MultiTool for handling batteries and cleaning 13
Start up
Turn the hearing aid on and off 14
Replace the battery 15
Handling
Insert the hearing aid 18
Caring for your hearing aid 20
Filter replacement 22
Flight mode (hearing aids with Bluetooth and push-button) 26
Options
Optional features and accessories 27
Change programs 28
Change volume with push button 30
Table of contents 1/2
Continues on next page

Change volume with volume wheel 31
Mute the hearing aid 32
Use hearing aids with iPhone, iPad, and iPod touch 33
Bluetooth accessories 36
Other options 37
Tinnitus
Tinnitus SoundSupport™ (optional) 38
Guidelines for tinnitus sound generator users 39
Sound options and volume adjustment 40
Limitation on use time 45
Warnings related to Tinnitus 48
Warnings
General warnings 50
More info
Troubleshooting guide 54
Water & dust resistant (IP68) 56
Conditions of use 57
Warranty 58
Technical information 60
Your individual hearing aid settings 66
Table of contents 2/2

8 9
About Startup Handling Options Tinnitus Warnings More info
Identify your hearing aid
For your in-the-ear hearing aid, there are several dierent styles
available with dierent battery sizes. Please see the model overview
for your style and battery size. This will make it easier for you to
navigate through this booklet.
About
Components may be positioned differently on your hearing aid.
Size 10 battery (CIC shown)
What it is and does
Battery drawer
Contains the
battery and
functions as
on/o switch
Pull out string
Pull out the
hearing aid
Sound outlet
Sound out
Vent Vent
Push button
(optional)
Mute, change
volume and
program
Microphone inlet
Sound in

10 11
About Startup Handling Options Tinnitus Warnings More info
Size 312 battery (ITC shown)
What it is and does
Size 13 battery (ITE HS shown)
What it is and does
Battery drawer
Contains the
battery and
functions as
on/o switch
Sound outlet
Sound out
Vent
Push button
(optional)
Mute, change
volume and
program
Vent
Microphone inlet
Sound in
Volume wheel
(optional)
Change volume
Components may be positioned differently on your hearing aid.
Battery drawer
Contains the battery and
functions as on/o switch
Microphone inlet
Sound in
Vent
Vent
Push button (optional)
Mute, change volume and
program
Volume wheel
(optional)
Change volume
Sound outlet
Sound out

12 13
About Startup Handling Options Tinnitus Warnings More info
Identify left and right hearing aid
It is important to distinguish between the left and the right hearing
aid as they might be shaped and programmed dierently.
A BLUE shell, dot or text
identies the LEFT
hearing aid
A RED shell, dot or text
identies the RIGHT
hearing aid*
MultiTool for handling batteries and cleaning
The MultiTool contains a magnet that makes it easier to replace the
battery in the hearing aid. It also contains a brush and a wire loop for
cleaning and removing earwax. If the vent is very small, a special tool
may be required. If you need a new tool please contact your hearing
care professional.
Brush
Wire loopMagnet
IMPORTANT NOTICE
The MultiTool has a built-in magnet. Keep the MultiTool 30 cm away from
credit cards and other magnetically sensitive devices.
* Shell colour and dot is only available for IIC

14 15
About Startup Handling Options Tinnitus Warnings More info
Turn the hearing aid on and o
The battery drawer is also used to switch the hearing aid on and o.
To save battery life, make sure your hearing aid is switched o when
you are not wearing it. If you wish to return to the standard settings of
the hearing aid, simply open and then close the battery drawer (quick
reset).
Turn ON
Close the
battery
drawer
with the
battery
in place.
Turn OFF
Open the
battery
drawer.
Start up
Replace the battery
When it is time to replace the battery, you will hear three beeps
repeated at moderate intervals until the battery runs out.
Three beeps*
= The battery is running low
Four beeps
= The battery has run out
Battery tip
To make sure the hearing aid is always working, bring spare batteries
with you, or replace the battery before you leave home.
* If your hearing aid has Bluetooth® this will be turned o and it will not be possible to
use wireless accessories.
Note: Batteries need to be replaced more often if you are streaming audio or music to your
hearing aids.
Note: Open the battery door fully to make sure the hearing aid do not drain the battery fully
to allow air to circulate whenever you are not using your hearing instrument,
especially at night or for longer periods of time!

16 17
About Startup Handling Options Tinnitus Warnings More info
How to replace the battery
2. Uncover 3. Insert
Fully open the
battery drawer.
Remove the battery.
Remove the sticky
label from the + side
of the new battery.
Tip:
Wait 2 minutes so that
the battery can draw
air, to ensure optimal
functioning.
Insert the new
battery into the
battery drawer.
Make sure the
+ side is facing up.
1. Remove
MultiTool
Close the battery drawer. The
hearing aid will play a jingle.
Hold the hearing aid close to your
ear to hear the jingle.
The MultiTool can be used for
battery change. Use the magnetic
end to remove and insert batteries.
The MultiTool is provided by
your hearing care professional.
4. Close Tip

18 19
About Startup Handling Options Tinnitus Warnings More info
Insert the hearing aid
Place the tip of the hearing aid in
your ear canal.
Gently pull your ear outwards and
push the hearing hearing aid into the
ear canal, twisting slightly if neces-
sary. Follow the natural contour of
the ear canal. Push the hearing aid
to make sure it ts comfortably in
the ear.
Step 1 Step 2
Remove your hearing aid
Hold the hearing aid by the pull-out string (if available). Gently pull the
hearing aid from the ear canal.
If your hearing aid doesn’t have a pull-out string, you can remove it by
pulling on the edge of the hearing aid.
IMPORTANT NOTICE
DO NOT use the battery door as a handle to insert or remove your hearing
aid. It is not designed for this purpose.
Handling

20 21
About Startup Handling Options Tinnitus Warnings More info
IMPORTANT NOTICE
Use a soft, dry cloth to clean the hearing aid. It must never be washed or
immersed in water or other liquids.
Vent
Vent
Clean the vent by pressing the brush
through the hole while twisting it slightly.
If the vent is very small, a
special tool may be required.
Please consult your hearing
care professional.
Caring for your hearing aid
When handling your hearing aid, hold it over a soft surface
to avoid damage if you drop it.
Cleaning the hearing aid
Carefully brush away debris from the microphone inlets with a clean
brush. Gently brush the surface. Make sure that the lters do not fall
o.
Microphone
inlets

22 23
About Startup Handling Options Tinnitus Warnings More info
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool from
the shell. The tool
has two pins, one
empty for removal
and one with the
new ProWax mini
lter.
Push the empty pin
into the ProWax mini
lter in the hearing
aid and pull it out.
Insert the new ProWax
mini lter using the
other pin, remove the
tool and throw it out.
1. Tool
New
lter
Filter replacement
The lters keep wax and debris from damaging the hearing aid.
If the lters becomes clogged, please replace the lters or contact
your hearing care professional.
• Prowax miniFit filter protects the sound outlet.
• O-cap and T-cap protect the microphone inlet.
Please refer to the following pages for instructions on how to replace
the appropriate lters.
IMPORTANT NOTICE
Always use the same type of wax lter as was originally supplied with the
hearing aid.
If you are in any doubt about the use or replacement of wax lters, contact
your hearing care professional.

24 25
About Startup Handling Options Tinnitus Warnings More info
Replace T-Cap lter
(hearing aids with 10 batteries)
2. Remove 3. Insert
Remove the tool from
the packaging. The
tool has two ends,
one for removal and
one with the new
T-Cap lter.
Push the tool fork
under the top edge
of the used T-Cap
lter and lift it out.
Insert the new T-Cap
lter and remove the
tool by twisting it
slightly. Throw the tool
out after use.
1. Tool
new lter
Replace O-Cap lter
(hearing aids with 312 and 13 batteries)
2. Remove 3. Insert
Remove the tool from
the packaging. The
tool has two ends,
one for removal and
one with the new
O-Cap lter.
Push the pointed end
of the tool into the
existing O-Cap lter
and pull it out.
Insert the new O-Cap
lter using the other
end of the tool, remove
the tool and throw it
out.
1. Tool
new lter

26 27
About Startup Handling Options Tinnitus Warnings More info
Flight mode
(hearing aids with Bluetooth and push-button)
When boarding an airplane or entering an area in which it is prohibited
to radiate radio signals, e.g. during ight, ight mode must be
activated. The hearing aid will still be working. It is only necessary to
activate ight mode on one hearing aid, to turn o Bluetooth on both
hearing aids. If your hearing aid does not have a push-button you need
to turn o your hearing aid.
To activate and deactivate
Press the push button for
at least 7 seconds. A jingle
conrms your action.
Opening and closing the
battery drawer will also
deactivate ight mode.
Options
Optional features and accessories
The features and accessories described on the following pages are
optional. Please contact your hearing care professional to nd out
how your hearing aid is programmed.
If you experience dicult listening situations, a special program may
be helpful. These are programmed by your hearing care professional.
Write down any hearing situations in which you may need help.

28 29
About Startup Handling Options Tinnitus Warnings More info
Change programs
Your hearing aid can have up to 4 dierent programs.
These are programmed by your hearing care professional.
To be lled out by the hearing care professional
Program Sound you will hear
when activated
When to use
1“1 beep”
2“2 beeps”
3“3 beeps”
4“4 beeps”
Program change:
Independent Synchronised
LEFT RIGHT
Short press Long press
Press the button to change program. Use a short
press if the push button is used for program
change only and a long press if it is also used for
volume control.
Note that if you have two synchronised hearing
aids, (both hearing aids respond when either
push button is operated) the RIGHT hearing aid
switches forward from e.g., program 1 to 2 and
the LEFT hearing aid switches backwards from
e.g., program 4 to 3.
If your hearing aids work independently, you
must press the buttons on each hearing aid.

30 31
About Startup Handling Options Tinnitus Warnings More info
A short press on the
RIGHT hearing aid
increases the volume
A short press on the
LEFT hearing aid
decreases the volume
You will hear
2 beeps at
start-up level Turn forward to
turn up volume
Turn backwards
to turn down the
volume
UpDown
Change volume with push button
The push button allows you to adjust the volume.
You may hear a click when you turn the volume up or down.
Change volume with volume wheel
The volume wheel allows you to adjust the volume.
You may hear a click when you turn the volume up or down.
To be lled out by the hearing care professional
Volume change LEFT RIGHT
MAXIMUM
START-UP
LEVEL
MINIMUM

32 33
About Startup Handling Options Tinnitus Warnings More info
Mute the hearing aid
Use the mute function if you need to silence the hearing aid. Only
available for hearing aids with push button.
IMPORTANT NOTICE
Do not use the mute function as an o switch, as the hearing aid still
draws current from the battery in this mode.
Apply a very long press to
the push button to mute the
hearing aid. To reactivate the
hearing aid, push the button
briey.
Use hearing aids with iPhone, iPad, and iPod touch
Your hearing aids are Made for
iPhone® and allow for direct
communication and control with
iPhone, iPad® or iPod touch®.
For assistance in using these
products with your hearing aids,
please contact your hearing care
professional or visit:
www.oticon.global/connectivity
NOTE: the mute function only mutes the microphone(s) on the hearing aids.
For information on compatibility,
please visit www.oticon.global/connectivity
Use of the Made for Apple badge means that an accessory has been designed to connect
specifically to the Apple product(s) identified in the badge, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
Apple, the Apple logo, iPhone, iPad, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries.

34 35
About Startup Handling Options Tinnitus Warnings More info
Pair hearing aids with iPhone
2. General
6. Conrm pairing
3. Accessibility1. Settings
5. Select
Open and close the
battery drawer on
both hearing aids,
and place them close
to your iPhone. The
hearing aids
remain in pairing
mode for 3 minutes.
Your iPhone will
detect the hearing
aids for pairing.
Detected devices will
appear in your iPhone
list. Choose your
hearing aids.
Conrm pairing. If you
have two hearing aids,
pairing conrmation is
needed for each
hearing aid.
Open your iPhone
and go to “Settings”.
Make sure Bluetooth
is on. Then choose
“General”.
On the “General”
screen, choose
“Accessibility”.
On the “Accessibility”
screen, choose
“MFi Hearing Devices”.
Bluetooth
General
Accessibility
MFi Hearing Devices
William’s Hearing Aids
Oticon Opn
Bluetooth Pairing
Request
“William’s Hearing Aids” would
like to pair with your iPhone
Cancel Pair
On
✓
4. Prepare
When you turn o your hearing aids or Apple® device, they will no longer be connected. To connect them again, turn on your hearing
aids by opening and closing the battery door. The hearing aids will then automatically reconnect to your Apple device.

36 37
About Startup Handling Options Tinnitus Warnings More info
Wireless accessories
As an enhancement to your hearing aids, a range of wireless
accessories are available. These can enable you to hear and
communicate better in many everyday situations.
ConnectClip
When paired with your mobile
phone, you can use the hearing
aids as a hands-free headset, or
as a remote microphone.
TV Adapter 3.0
Wireless transmitter of sound
from TV and electronic audio
devices. TV Adapter streams
sound directly to your hearing
aids.
Remote Control 3.0
Oers the ability to change
program, adjust volume, or mute
your hearing aids.
Oticon ON App
Oers an intuitive and discreet
way to control your hearing aids.
For iPhone, iPad, iPod touch, and
Android™ devices.
For more information visit:
www.oticon.global/connectivity
Other options
Telecoil - only optional for some styles*
Telecoil helps you hear better when using a
telephone with a built-in loop or when you are in
buildings with teleloop systems such as theatres,
churches, or lecture rooms. This symbol or a similar
sign is shown wherever a teleloop has been installed.
Autophone - only optional for some styles
The autophone can automatically activate a phone
program in the hearing aid, if you place a dedicated
magnet on your phone.
* Be aware that when you activate 2.4 GHz and telecoil at the same time an artefact
sound can occur.
For more information, please contact your hearing care professional.

38 39
About Startup Handling Options Tinnitus Warnings More info
38 39
Tinnitus SoundSupport™(optional)
Intended use of Tinnitus SoundSupport
Tinnitus SoundSupport is a tool intended to generate sounds to
provide temporary relief for patients suering from tinnitus as part
of a tinnitus management program. The target population is the adult
population (over 18 years old).
Tinnitus SoundSupport is targeted to licensed hearing
care professionals (audiologists, hearing aid specialists, or
otolaryngologists) who are familiar with the evaluation and treatment
of tinnitus and hearing loss. Fitting of Tinnitus SoundSupport must
be done by a hearing care professional participating in a tinnitus
management program.
Styles available with Tinnitus SoundSupport
CIC, ITC, ITE HS & ITE FS for hearing aids with push button. Please see
the model overview to nd out which style your hearing aid is.
Tinnitus
Guidelines for tinnitus sound generator users
These instructions contain information about Tinnitus SoundSupport,
which may have been enabled in your hearing aids by your hearing
care professional.
Tinnitus SoundSupport is a tinnitus management tool intended to
generate sound of sucient intensity and bandwidth to help manage
tinnitus.
Your hearing care professional will also be able to oer the
appropriate follow-up care. It is important to follow his/her advice and
directions regarding such care.
Prescription use only
Good health practice requires that a person reporting tinnitus has a
medical evaluation by a licensed ear physician before using a sound
generator. The purpose of such an evaluation is to ensure that any
medically treatable condition that may cause tinnitus is identied and
treated prior to using a sound generator.