oticon OPN User manual

1
Quick guide
Re-pairing Oticon Opn™with
accessories after rmware updates

2 3
After upgrading Oticon Opn firmware, it is necessary to
re-pair the instruments with relevant accessories.
This short guide shows you how to re-pair Oticon Opn with
different types of accessories.
Remote Control 3.0 3
Clear previous pairing in remote control 3
Put the hearing aids in pairing mode 3
Pair the remote control with the hearing aids 4
TV Adapter 3.0 5
iPhone 6
Remove the “old pairing” from iPhone® 6
Pair the hearing aids with iPhone 8
Android 10
Remove the “old pairing” from the Android™ device 10
Pair the hearing aids with the Android device 12
Notes 14
Please visit www.oticon.com for more details on compatibility, or see the
description of the Oticon ON App on the App Store® and Google Play™.
Apple, the Apple logo, iPhone, iPad, iPod touch, and Apple Watch are
trademarks of Apple Inc., registered in the U.S. and other countries. App
Store is a service mark of Apple Inc. Android, Google Play, and the Google
Play logo are trademarks of Google Inc.
Remote Control 3.0Introduction Table of contents
Press and hold all buttons
for 5 seconds.
The status LED will flash
green twice.
The status LED will then
glow green for about 10
seconds to confirm the
remote is ready for pairing.
Ensure that you have
good batteries in the
hearing aids.
Open the battery doors
of both hearing aids.
Wait about five seconds
and close the battery
doors again.
Wait for about 10 seconds,
until the hearing aids are
fully turned on and the
power-on-jingle has been
played.
The hearing aids will remain
in pairing mode for about
3 minutes.
1. Clear previous pairing in remote control 2. Put the hearing aids in pairing mode

4 5
TV Adapter 3.0Remote Control 3.0
1. Pair the TV Adapter with the hearing aids (no need to clear previous pairings)3. Pair the remote control with the hearing aids
Place both hearing aids within
20 cm (approx. 7 inches) of the
remote control.
Briefly press any key on the remote
control to make it automatically pair
with the hearing aids.
When pairing is completed, the status
light glows green for about 10 seconds.
Ensure that you have good batteries
in the hearing aids.
Open the battery doors of both hearing
aids. Wait about five seconds and close
the battery doors again.
Wait about 10 seconds, until the hearing
aids are fully turned on and the power-
on-jingle has been played.
Place both hearing aids close to or on
top of the TV Adapter.
Pairing is completed when the power
indicator and the TV indicator
glow blue for about 30 seconds.
TV Adapter Description
Pairing completed

6 7
iPhone
>
>
>
>
>
>
>
>
Enter Settings
Find the Settings icon
on iPhone.
Select General Select Accessibility Select Hearing Devices Select the hearing aids you
would like to remove.
Select Forget iPhone will now search for
new hearing aids. Be sure
to complete the next step
before you begin a new
pairing process.
Turn Bluetooth Off
and back On before
pairing again.
Settings General Accessibility
General
Accessibility
Hearing Devices
Hearing Devices
Forget
Searching...
Bluetooth On
Settings
1. Remove the “old pairing” from iPhone

8 9
iPhone
Ensure Bluetooth is On iPhone will now search for
hearing aids.
Open and then close
the battery door on the
instruments so iPhone can
recognize them.
Select the hearing aids
when they become available.
Confirm the Bluetooth
pairing request once
for each hearing aid.
2. Pair the hearing aids with iPhone
>>>

Bluetooth On Searching... William’s Hearing Aids
Oticon Opn
Bluetooth Pairing
Request
Oticon Opn would like to pair
with your iPhone
Cancel Pair
Enter Settings
Find the Settings icon
on iPhone.
Select General Select Accessibility Select Hearing Devices
>
>
>
>
General
Settings
Accessibility
Hearing Devices
Settings General Accessibility

10 11
Android device
1. Remove the “old pairing” from the Android device 1. Remove the “old pairing” from Android device
WApp version 1.0.9 WApp version 1.0.10 and later
>
>
>
>
Bluetooth On
>
Settings
>
Hearing Aids
Paired devices
Name
William´s Hearing Aids
FORGET
Oticon ON App
Settings
Reset App
Start the Oticon ON App Enter Settings
Press the Settings icon
to access the secondary
features of the Oticon
ON App.
Reset App
Resetting the App will also
remove the old pairing.
Enter Settings Ensure Bluetooth is On Select Hearing Aids Select Forget
Reset App following the
steps on the next page.

12 13
Android device
2. Pair the hearing aids with the Android device
Connect to your
hearing aids
Select your hearing aids
by pressing the “Pair”
button. If someone else’s
hearing aids appear, try
to search for your hearing
aids again.
Wait for the Oticon ON
App to connect
Follow the brief tutorial
The first time you start
the App, it presents you
with a short overview of
how you can control it.
Start the Oticon ON App Allow access to device
information
The first time you start
the app, allow it to access
the device’s location. This
ensures the best possible
functionality.
Ensure Bluetooth is
switched on
If Bluetooth is switched
off on your device, it
will automatically show
you this message. Press
“Turn On Bluetooth” and
continue.
Search for your
hearing aids
Your device will connect
to your hearing aids when
you start the Oticon ON
App. If it can’t find your
hearing aids, restart them
by opening and closing
their battery doors.
>
Oticon ON App
Allow Oticon ON to access
this device’s location?
Turn on Bluetooth
Search for your hearing aids
ALLOW
Available hearing aids
Connecting
Swipe up or down, anywhere on the
screen, to adjust the volume

14 15
Notes

16
www.oticon.com
12924 15555-10092 / 05.17