oticon OPN User manual

Instructions for use IIC-CIC-ITC
ITE HS-ITE FS
Oticon Opn
Oticon Siya

Model overview
This booklet is valid for the Oticon Opn™ and Oticon Siya families in the
following hearing aid models, battery sizes and styles:
Models:
Oticon Opn 1 Oticon Opn 2 Oticon Opn 3
Oticon Siya 1 Oticon Siya 2
Battery size:
10 312 13
Bluetooth®: Yes No
Styles:
IIC Invisible-In-the-Canal
CIC Completely-In-the-Canal
ITC In-the-Canal
ITE HS In-the-Ear Half Shell
ITE FS In-the-Ear Full Shell

Introduction to this booklet
This booklet gives you guidance on how to use and maintain your new
hearing aid. Please read the booklet carefully including the Warning
section. This will help you to achieve the full benet of your new hearing
aid.
Your hearing care professional has adjusted the hearing aid to meet your
needs. If you have additional questions, please contact your hearing care
professional.
For your convenience this booklet contains a navigation bar to help you
navigate easily through the dierent sections.
About Startup Handling Options Tinnitus Warnings More info

Intended use
The hearing aid is intended to amplify and transmit sound to the ear and
thereby compensate for impaired hearing within mild to severe hearing
loss. This hearing aid is intended for use by adults and children older than
36 months.
IMPORTANT NOTICE
The hearing aid amplication is uniquely adjusted and optimised to your
personal hearing capabilities during the hearing aid tting performed by your
hearing care professional.

Table of contents
About
Identify your hearing aid 8
Identify left and right hearing aid 12
MultiTool for handling batteries and cleaning 13
Start up
Turn the hearing aid on and off 14
Replace the battery 15
Handling
Insert the hearing aid 18
Caring for your hearing aid 20
Filter replacement 22
Flight mode
(hearing aids with Bluetooth and push-button) 26
Options
Optional features and accessories 27
Change programs 28
Change volume with push button 30
Change volume with volume wheel 31

Mute the hearing aid 32
Use hearing aids with iPhone, iPad, and iPod touch 33
Wireless accessories 34
Other options 36
Tinnitus
Tinnitus SoundSupport™ (optional) 38
Guidelines for tinnitus sound generator users 39
Sound options and volume adjustment 40
Limitation on use time 45
Warnings related to Tinnitus 48
Warnings
General warnings 49
More info
Troubleshooting guide 54
Water & dust resistant (IP68) 56
Conditions of use 57
Technical information 58
Warranty 67
Your individual hearing aid settings 68

8About Startup Handling Options Tinnitus Warnings More info
Identify your hearing aid
For your in-the-ear hearing aid, there are several dierent styles available
with dierent battery sizes. Please see the model overview for your style
and battery size. This will make it easier for you to navigate through this
booklet.
About

9
Components may be positioned differently on your hearing aid.
Size 10 battery (CIC shown)
What it is and does
Battery drawer
Contains the
battery and
functions as
on/o switch
Pull out string
Pull out the
hearing aid
Sound outlet
Sound out
Vent Vent
Push button
(optional)
Mute, change
volume and
program
Microphone inlet
Sound in

10 About Startup Handling Options Tinnitus Warnings More info
Size 312 battery (ITC shown)
What it is and does
Battery drawer
Contains the
battery and
functions as
on/o switch
Sound outlet
Sound out
Vent
Push button
(optional)
Mute, change
volume and
program
Vent
Microphone inlet
Sound in
Volume wheel
(optional)
Change volume

11
Size 13 battery (ITE HS shown)
What it is and does
Components may be positioned differently on your hearing aid.
Battery drawer
Contains the battery and
functions as on/o switch
Microphone inlet
Sound in
Vent
Vent
Push button (optional)
Mute, change volume and
program
Volume wheel
(optional)
Change volume
Sound outlet
Sound out

12 About Startup Handling Options Tinnitus Warnings More info
Identify left and right hearing aid
It is important to distinguish between the left and the right hearing aid as
they might be shaped and programmed dierently.
A BLUE shell, dot or text
identies the LEFT
hearing aid
A RED shell, dot or text
identies the RIGHT
hearing aid*
* Shell colour and dot is only available for IIC

13
MultiTool for handling batteries and cleaning
The MultiTool contains a magnet that makes it easier to replace the battery
in the hearing aid. It also contains a brush and a wire loop for cleaning and
removing earwax. If the vent is very small, a special tool may be required. If
you need a new tool please contact your hearing care professional.
Brush
Wire loopMagnet
IMPORTANT NOTICE
The MultiTool has a built-in magnet. Keep the MultiTool 30 cm away from credit
cards and other magnetically sensitive devices.

14 About Startup Handling Options Tinnitus Warnings More info
Turn the hearing aid on and o
The battery drawer is also used to switch the hearing aid on and o. To save
battery life, make sure your hearing aid is switched o when you are not
wearing it. If you wish to return to the standard settings of the hearing aid,
simply open and then close the battery drawer (quick reset).
Turn ON
Close the
battery
drawer
with the
battery
in place.
Turn OFF
Open the
battery
drawer.
Start up
Note: Open the battery door fully to make sure the hearing aid do not drain the battery fully to
allow air to circulate whenever you are not using your hearing instrument, especially at night or
for longer periods of time!

15
Replace the battery
When it is time to replace the battery, you will hear three beeps repeated at
moderate intervals until the battery runs out.
Three beeps*
= The battery is running low
Four beeps
= The battery has run out
Battery tip
To make sure the hearing aid is always working, bring spare batteries with
you, or replace the battery before you leave home.
* If your hearing aid has Bluetooth® this will be turned o and it will not be possible to use
wireless accessories.
Note: Batteries need to be replaced more often if you are streaming audio or music to your hearing
aids.

16 About Startup Handling Options Tinnitus Warnings More info
How to replace the battery
2. Uncover 3. Insert
Fully open the battery
drawer. Remove the
battery.
Remove the sticky
label from the + side of
the new battery.
Tip:
Wait 2 minutes so that the
battery can draw air, to
ensure optimal
functioning.
Insert the new battery
into the battery drawer.
Make sure the + side is
facing up.
1. Remove

17
MultiTool
Close the battery drawer. The hearing
aid will play a jingle.
Hold the hearing aid close to your ear
to hear the jingle.
The MultiTool can be used for battery
change. Use the magnetic end to
remove and insert batteries.
The MultiTool is provided by your
hearing care professional.
4. Close Tip

18 About Startup Handling Options Tinnitus Warnings More info
Insert the hearing aid
Place the tip of the hearing aid in your
ear canal.
Gently pull your ear outwards and push
the hearing hearing aid into the ear
canal, twisting slightly if necessary.
Follow the natural contour of the ear
canal. Push the hearing aid to make
sure it ts comfortably in the ear.
Step 1 Step 2
Handling

19
Remove your hearing aid
Hold the hearing aid by the pull-out string (if available). Gently pull the
hearing aid from the ear canal.
If your hearing aid doesn’t have a pull-out string, you can remove it by
pulling on the edge of the hearing aid.
IMPORTANT NOTICE
DO NOT use the battery door as a handle to insert or remove your hearing aid. It
is not designed for this purpose.

20 About Startup Handling Options Tinnitus Warnings More info
Caring for your hearing aid
When handling your hearing aid, hold it over a soft surface to avoid damage
if you drop it.
Cleaning the hearing aid
Carefully brush away debris from the microphone inlets with a clean brush.
Gently brush the surface. Make sure that the lters do not fall o.
Microphone
inlets