Outback Hunter THG3302PD User manual

Photographs are not to scale.
Specifications subject to change
without prior notice.
Assembly and Operating Instructions for Outback®
Hunter 3 Burner Gas BBQ
WARNING
 For outdoor use only. Not for commercial use.
 Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
 Warning: accessible parts may be very hot. Keep young children and pets away.
 Do not move the appliance during use.
 Turn off the gas supply at the gas bottle after use.
 Any modification of the appliance, misuse, or failure to follow the instructions may be
dangerous and will invalidate your warranty. This does not affect your statutory rights.
 Retain these instructions for future reference.
 Leak test annually, and whenever the gas bottle is removed or replaced. Check that the
hose connections are tight and leak test each time you reconnect the gas bottle.
 For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359
THG3302PD

2
Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram’.
CODE PART QTY Outback® Hunter 3 Burner
Gas BBQ
HOOD
A1 Hood (Pre-Assembled to Body) 1 
A2 Hood Handle 1 
A3 Heat Indicator 1 
A4 Warming Rack 1 
BODY
B1 Barbecue Body 1 
B2 Burner 3 
B3 Control Panel 1 
B4 Knob 3 
B5 Flame Tamer 3 
B6 Cooking Grill 2 
B7 Drip Tray 1 
B8 Drip Tray Left Bracket 1 
B9 Drip Tray Right Bracket 1 
B10 Hose and Regulator Assembly 1 
B11 Charcoal Basket 1 
TROLLEY
C1 Left Side Shelf 1 
C2 Right Side Shelf 1 
C3 Left Front Leg 1 
C4 Left Rear Leg 1 
C5 Right Front Leg 1 
C6 Right Rear Leg 1 
C7 Screen 1 
C8 Trolley Base 1 
C9 Leg Endcap 2 
C10 Axle 1 
C11 Wheel 2 
C12 Wheel Hubcap 2 

HARDWARE
D1 M5x15 Bolt 4 
D2 Washer 4 
D3 M5 Nut 4 
D4 M6x110 Bolt 8 
D5 Spacer 8 
D6 M6x25 Bolt 16 
D7 M6x15 Bolt 8 
D8 Axle Washer 2 
D9 Locknut 2 
 Pre-Assembled Component

3
Parts Diagrams
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see hardware pack page.
B3
C1
C3 C6
C10
C11C12
C9
C4 C5
B8
B10 B4
B9
A1
C8
B6
C2
B2
D8
D9
A4
A3
A2
B1
B5
C7
B7
B11

4
Hardware Reference Diagram
Specifications subject to change without prior notice.
D1,D2,D3
D6
D4,D5
D7

5
2
Assembly
IMPORTANT!
 TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
 Remove any internal components or packaging from the barbecue body.
 Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
 Please read the Important Information section carefully before assembly and use of your
barbecue.
1
Attach the Trolley Base (C8) onto the Left Front Leg (C3) and Right Front Leg (C5) using the
M6x15 Bolts (D7x4pcs) as shown.
C5
C8
C3
D7
Attach the Left Rear Leg (C4) and Right Rear Leg (C6) to the Trolley Base (C8) using the
M6x15 Bolts (D7x4pcs) as shown.
C8
C6
C4
C3 C5
D7