manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. OUTDOOR AIR
  6. •
  7. Safety Equipment
  8. •
  9. OUTDOOR AIR IKIT User manual

OUTDOOR AIR IKIT User manual

Popular Safety Equipment manuals by other brands

Lanex PB-20 instruction manual

Lanex

Lanex PB-20 instruction manual

SKYLOTEC ANCHOR ROPES Instructions for use

SKYLOTEC

SKYLOTEC ANCHOR ROPES Instructions for use

Besto Buoyancy Aid 50N Instructions for use

Besto

Besto Buoyancy Aid 50N Instructions for use

TEUFELBERGER NODUS Manufacturer's information and instructions for use

TEUFELBERGER

TEUFELBERGER NODUS Manufacturer's information and instructions for use

Troy Lee Designs Tbone Product owners manual

Troy Lee Designs

Troy Lee Designs Tbone Product owners manual

Innova Xtirpa Instruction and safety manual

Innova

Innova Xtirpa Instruction and safety manual

bolle SAFETY B810 quick start guide

bolle SAFETY

bolle SAFETY B810 quick start guide

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual

Hiltron security POWER8E Installation and use manual

Hiltron security

Hiltron security POWER8E Installation and use manual

Salewa MTN SPIKE user manual

Salewa

Salewa MTN SPIKE user manual

Hatco B-950P installation guide

Hatco

Hatco B-950P installation guide

Sitec TX MATIC operating manual

Sitec

Sitec TX MATIC operating manual

TEUFELBERGER GRIP 12 Manufacturer's information and instructions for use

TEUFELBERGER

TEUFELBERGER GRIP 12 Manufacturer's information and instructions for use

MSA PremAire System Operation and instructions

MSA

MSA PremAire System Operation and instructions

AMC 1022M Series instruction manual

AMC

AMC 1022M Series instruction manual

Trinity CASS S3 Assembly manual

Trinity

Trinity CASS S3 Assembly manual

CMC Helitack HotSeat quick guide

CMC

CMC Helitack HotSeat quick guide

ACM SAFETY D200 Instructions and warnings

ACM

ACM SAFETY D200 Instructions and warnings

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

IKIT
Personal Cooling System
Setup / Operation


Name Air Conditioner
Model 20K010
Voltage DC 12V
Electric current DC 4A(MAX)
Power Levels 4
Battery capacity 5000mAh
Battery Type 7AH lithium
Charging time 4-hours











Back
Batter
y
Cooling modulesManual Control
Front
BatteryController
DC Plug
Cable
Cooling module
After charging the battery, insert it into the
pocket next to the button controller and
plug the unit in.
Installation

Button controller should be installed in
the pocket with the clear viewing
window and the M button visible.

Thebelowinformationwasintentionally preparedforyou.
Pleasereadit.


Health Warning: IKIT personal cooling systems are Not a
substituteforhydrationwithwater,indoorairconditioning,and
wise judgement when navigating personal safety in hot
environments.
Additionally,donotassumethatcolderisbetter!Theadjustable
levels of the IKIT cooling system are designed to reduce the
effectsofhighheattothehumanbody,noteliminatethem. 
Setting the temperature too low could have negative health
effects.Onlyadjustforenoughcooling power proportionate to
theheatintensityofyourambientenvironment.15‐minutesrest
after1‐hourcontinuoususeisrecommended. 
Note:
1. Refrigeration module is Not waterproof, Do not pour liquid
directlyonanyportionoftheIKITsystem. 
2. Condensation buildup is normal on higher power levels.
3.ExternalmodulefansMUSTHAVEUNOBSTRUCTEDAIR‐FLOW
tofunction. 
BatterySafetyWARNING:IfLi‐Ionbatteriesareincorrectlyused,
stored,orcharged,theyareafire,burnandexplosionhazard.•
Keepthebatteryoutofreachofchildren•OnlychargeLi‐Ion
batteriesusingthechargerprovidedordesignedspecificallyfor
yourproduct•OnlyuseLi‐Ionbatteriesprovidedwithaproduct
orspecificallydesignedtobecompatible.•Allowbatteriestocool
for15minutesafterchargingorheavyuse.Failuretofollowthese
instructionsmaycauseoverheatingorfire•Whennotinuse,
batteriesshouldbestoredatroomtemperature(approximately
20°C/68°F)Avoidcontact.Ifcontactaccidentallyoccurs,flushwith
water.Ifliquidcontactseyes,seemedicalhelp•DONOTopen,
disassemble,crush,heatabove60°C/140°Forincinerate.
Disposal:Alwaysadheretonationalregulationswhendisposing
ofbatteries•Donotdisposeofbatterieswithhouseholdwaste•
Donotdisposeofbyincineration•Contactyourlocalwaste
disposalauthorityforinformationonthecorrectwaytodispose
ofbatteries.
1. Be sure your device’s Bluetooth is On and NOT
connected to any other device.
2. After downloading and reopening the app,
follow the registration process according to the
prompts. Be sure that when registering your phone
number, it begins with the country code.
3. Log in and click "+" in the Device Menu in the
upper left corner.
4. Manually turn on IKIT by pressing/hold the M
button for 2-3 seconds and the button turns red.
5. After the phone identifies a semiconductor
device, tap Add Device.
6. The added device should now be highlighted in
the Device Menu indicating that it is the (active)
device.
7. While active, the upper right corner menu
options are now available such as Delete, Rename,
Password, Logout.
8. To deactivate the device, tap Discon at the top of
the Device Menu.
9. Pairing additional devices should only be 1-at a
time, with other devices in range powered off.
Connect/disconnect devices
10. To control multiple devices, disconnect from
one, and then activate the next to be controlled by
tapping it.
11. From this point, controlling IKIT is simple. Play
around with it. You won’t it. If additional
information is needed, please refer to the graphics
following, check out the videos, or shoot us an
email.
NOTE: When you delete a device, you must clear
Bluetooth pairing by pressing and holding the M
for 15-seconds. ForOutdoorAirtechnicalsupport
Email:[email protected]


Manual Operation

1. Press-hold the M on the button controller for two
to three seconds to turn on power level 1. (Red)
2. Single press to cycle power levels 2, 3, 4, 1,>>.
3. Press-hold the M on the button controller for 2-3
seconds to turn off.
NOTE: Clear Bluetooth pairing by pressing and
holding the M for 15-seconds.
Bluetooth
1. Apple users please download the Amama app
from the app store and install.
1a. Android users, please scan the code below and
install.
Customer service #
WeChat: 8057335866
2. When registering with
Amama, please be sure that your country code
precedes your phone number. Use 001 for the
United States.
3. For app operation, and other instructional video
information, scan here.