Outdoor living today Potting Bench User manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Potting Bench Assembly Manual
Outdoor Living Today
Top Shelf Back Plate (I)
Top Shelf End Bracket (J)
Legs (E)
Bottom Shelf Pieces (G)
Upper Shelf (D)
Top Shelf Ledge (H)
A. Upper Side Shelf Skirting - 2 pcs (5 1/2” x 20 3/4”)
B- Upper Rear Shelf Skirting - 1 pcs (5 1/2” x 42”)
C- Upper Front Shelf Skirting - 1 pcs (3 1/2” x 42”)
D - Upper Shelf - 1 pc (21 1/4” x 42 1/2”)
E - Legs - 4 pcs (3 1/2” x 34”) 1 Front Leg Notched
F - Bottom Shelf Support - 2 pcs (3 1/2” x 17 3/4”)
G - Bottom 3/4” x 3 1/2” x 40 1/2” Shelf Pieces - 5 pcs
H - Top Shelf Ledge - 1 pc (4 3/4” x 40 1/2”)
I - Top Shelf Back Plate - 1pc (5 1/2” x 40 1/2”)
Upper Side Shelf Skirting (A)
Upper Rear Shelf Skirting (B)
Bottom Shelf Support (F)
Upper Front Shelf
Skirting (C) Upper Side Shelf Skirting (A)
Top Shelf End Bracket (J)
In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support
Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you
to courier replacement parts, free of charge, within 10 business days of this notification.
Replacement parts will not be provided free of charge after the 30 day grace period.
J - Top Shelf End Bracket - 2 pcs (5 1/2” x 18”)
K - Side Sink Framing with ledge 2 pcs (5 1/2” x 13”)
L - Front & Rear Sink Framing 2 pcs (5 1/2” x 14 1/2”)
M - Plywood Sink Bottom 1 pc (13” x 16”)
Hardware
1 1/4” Finishing Nails, 1 1/4” Screws, Square Bit
Tools Required
Screw Gun, Level, Hammer, 1/16” Drill Bit
Potting Bench Parts and Hardware List
Page 1
Revision #8
March 17th, 2015
K
L
M
Front Right Leg Notched

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 2
1.
2.
Slide Upper Shelf (D) into the dado
cut of Upper Shelf Skirting pieces.
Locate both Side (A) and Rear Upper Shelf
Skirting pieces (B), and place on flat level
ground on edge with dado to inside. Screw
Side Shelf pieces to Rear Shelf with 2 - 1 1/4”
screws per side. Complete both sides.
1 1/4” screws
Carefully flip Upper
Shelf Skirting
pieces over.
Slide Upper Shelf until it is
sitting completely in dado
cut of both side and rear
Skirting pieces.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 3
3.
Position Upper Front Shelf Skirting (C) between Upper Side
Shelf Skirting pieces. Position flush to outside and attach
with 2 - 1 1/4” screws per side.
4.
5.
Place Legs (E) in each corner. Attach with 6 - 1 1/4” screws per
Leg. Note: 1 leg has a piece cut out at top. It fits in the front corner
on the Hinged Lid side of Upper Shelf.
To determine the location of the Bottom Shelf, measure to a desired height and
attach both Bottom Shelf Supports (F). Attach with 4 - 1 1/4” screws per piece.
C
Hinged
Lid Side.

End Bracket (J)
Top Shelf Back Plate (I)
Top Shelf Ledge (H)
Attach End Bracket (J) to
end of Top Shelf Back
Plate (I) with 2 - 1 1/4”
screws. Note, the End
Bracket is Pre-drilled for
you. Complete both sides.
Exploded View of Top Shelf
Carefully flip Potting Bench over. Locate 5 Bottom
Shelf Pieces (G). Starting in the rear, position 1 piece
and nail to Bottom Shelf Supports with 4 - 1 1/4” nails.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 4
6.
Hint: Complete front and rear pieces first and then
evenly space remaining boards when securing.
7.
End Bracket (J)
Flush at top
After flipping
Bench over,
remove temporary
Sink Lid tape from
underneath.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 5
8.
Flip Top Shelf up on End Brackets and position Top Shelf Ledge (H)
between brackets. Center Ledge with pre-drilled holes of End Brackets and
attach with 2- 1 1/4” screws per side. Before attaching, make sure Ledge
edge sits tight with Back Plate. Flip Top Shelf on face and fasten 3 - 1 1/4”
screws into Ledge edge. Pre-drill holes first to avoid wood from splitting with
1/16” drill bit. Lift up completed Top Shelf and place on Upper Shelf.
9.
Attach completed Top
Shelf and Side Skirting
together with 2 - 1 1/4”
screws per side. Place
screws in pre-drilled
holes of Side Skirting.
Complete both sides.
Find center, 2 3/4”
from Plate edge,
when attaching.
1 1/4”
screws
10.
Position Side Sink Frame with Ledge (K) and Front or Rear Sink Frame (L) together and
attach with 4 - 1 1/4” screws. Make sure framings are flush with each other. Note, Pre-drill
Part K & L to prevent wood from splitting with 1/16” drill bit.
K
L
KL
MPre-drill with
1/16” Bit.

Attach remaining sink framings as per
Step 10. Flip framings over so Side
Framing Ledge is on the bottom. Place
Plywood Sink Bottom (M) over
framings and attach with
6 - 1 1/4” screws. Pre-drill holes once
again to prevent wood splitting.
11.
Flip Sink Framings Over.
Framing ledge on bottom.
12. Lift up Sink Lid and position
completed Sink in cavity to complete.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 6
Pre-drill 6 holes
with 1/16” Bit.

Completed Potting Bench
We hope your experience
assembling your 4x2 Potting
Bench has been both
positive and rewarding.
We value your feedback and
would like to hear back from you
on how well we are doing in the
following areas:
1. Customer Service
2. On Time Shipping
3. Motor Freight Delivery
4. Quality of Materials
5. Assembly Manual
6. Overall Satisfaction.
Please call, write or email us at:
The materials contained in this Assembly
Manual may be downloaded or copied
provided that ALL copies retain the
copyright and any other proprietary
notices contained on the materials. No
material may be modified, edited or
taken out of context such that its use
creates a false or misleading statement
or impression as to the positions,
statements or actions.
Canadian Address
9393 287th Street
Maple Ridge, British Columbia
Canada V2W 1L1
United States Address
P.O. Box 96
Sumas, Washington
USA 98295
Outdoor Living Today
Toll Line: 1.888.658.1658 | Fax: [phone] | [e-mail]
Page 7