OuTool K1097 User manual


5 BIG LED WORK LIGHT
INSTRUCTIONMANUAL
Item No.:K1097

1. Handle
2. 5 BIG LED
3. Switch
4. Charging socket
5. Magnet
6. Car Charger
7. AC charger
8. AC charger
WARNING
This device utilizes rechargeable Lithium ion battery that can rupture, ignite and cause series injury if missed usage.
Observe the follow safety rules;
DO NOT place battery and device in fire or high temperature
DO NOT tamper with battery wiring
DO NOT puncture or damage battery
DO NOT use battery that appears damaged
DO NOT immerse or expose battery to water
DO NOT alter or modify the battery
DO NOT attempt changing the battery in any manner other than that prescribed in this manual.
DO NOT dispose of the battery in fire or water.
Failure to heed these warning may result in personal injury and/or property damage.
Assembly and use
1, charging
Connect the charger into charging socket, which is located on the rear of worklight.
Connect the charger to a power supply.
The charging indicator will illuminate to show the charging has started.
NOTE: The charging indicator will turn green when the lamp is fully charged .
Disconnect the charger from the worklight when it has been charged for a sufficient time.
2, operating the lamp
CAUTION: Never shine the LED light directly into your or anyone else’s eyes .
Specifications：
Chargingtime：2‐3hours
Workingtime：3‐4hours
LuminousFlux：800Lm
Battery：7.4V2200mAhlithiumbattery
