Outsunny 842-229 User manual

INbzb019_UK
842-229
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

WARNINGS:
● This fire bowl is intended for outdoor use only. Do not use on wooden decks.
● This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or
other combustible materials in the fire bowl.
● Not for use by children. Keep children and pets away from the fire bowl.
● The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare
hands.
● Never leave the burning fire bowl unattended, and always extinguish the fire
completely before leaving the fire bowl.
● Do not use near flammable or combustible objects or materials.
● When the fire bowl is in use, the handle on the mesh screen can reach
extreme temperatures that can cause serious injury to an unprotected hand.
Use a poker or an appropriate heat resistant glove or pad when handling.
● Check local fire regulations and municipal by-laws for safe use.
● Some parts may contain sharp edges—especially as noted in the manual.
Wear protective gloves if necessary.
● The metal may become very hot during and after use. Do not touch the metal
or try to move the unit while hot.
● Keep children away from the unit while in use until the fire is extinguished and
the metal has cooled.
● Do not use on a wooden surface, or on grass, near walls or flammable arti-
cles, or under overhead coverings.
● Keep at least 2 feet away from all other articles during use.
● Use only the fuel type(s) specified in the instructions. Using other fuel types is
dangerous and could cause injury.
● Do not overload the unit with fuel.
-2-

PREPARATION
FIRE PIT PARTS LIST
No. PARTS Qty
A
Legs
4
B Side Panels 4
C
Table top
1
D
Tile
8
E
Bowl
1
F
Wood grate
1
G
Cooking grill
1
H
Spark screen
1
J
Handle
1
K Poker 1
HARDWARE LIST
No. Hardware Qty
S1
M6 x12 mm Bolt
24
S2
M6 Nuts
1
Before beginning assembly of product, make sure all parts are present. Com-
pare parts with package contents list and hardware contents above. If any part
is missing or damaged, do not attempt to assemble the product. Contact cus-
tomer service for replacement parts.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: M6 Wrench (Included) and Phillips Screwdriver
(Not Included)
-3-

Step By Step Assembly Instructions:
Step1: Attach Legs (A) to Table top (C) using 8pcs M6 x 12mm bolts(S1). Tight-
en all bolts at this time.
Step2: Attach Side panel (B) to the legs by using 16pcs M6 x 12 MM Bolts (S1).
Tighten all bolts with Phillips Screwdriver (Not Included).
-4-

Step3: Place the Tile (D) into the table top.
Step4: Attach Handle (J) to Spark screen (H) by using M6 Nut (S2). Tighten nut
with Wrench.
-5-

Step5: Place Fire bowl (E), Wood Grate (F) and cooking grill (G) into fire pit
assembly. Cover with Spark screen (H). Place Poker (K) near fire pit for use as
needed.
-6-