OVE ELLIS User manual

1
Opening
24 5/8”
[625]
17 3/4”
[450]
2015-09-04
ELLIS 60
Measures: inch [millimeter]
2800 Etienne Lenoir, Laval
Québec H7R 0A3 Canada
Purchase date: _________________________ Product Tracking Reference: ________________________
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at
1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday
78 3/4”
[2000]
Rough-in
60”
[1524]
78 3/4”
[2000]
CSA Markings
28 1/16”
[713] 29 13/16”
[758]
Wall-to-Wall
58 3/16”
[1478]

2
TABLE OF CONTENT
PACKAGE CONTENT.......................................................................................................................................... 4
HARDWARE CONTENT...................................................................................................................................... 5
TOOLS REQUIRED............................................................................................................................................. 5
SAFETY INFORMATION..................................................................................................................................... 6
PREPARATION.................................................................................................................................................... 6
SHOWER REVERSIBILITY.................................................................................................................................. 7
BASE INSTALLATION GUIDELINES (OPTIONAL)............................................................................................ 8
SHOWER FRAME INSTALLATION......................................................................................................................9
WALL TRACK INSTALLATION..........................................................................................................................13
DOOR INSTALLATION.......................................................................................................................................15
HANDLE INSTALLATION & SEALING.............................................................................................................. 17
CARE AND MAINTENANCE............................................................................................................................. 18
LIMITED 5 YEARS WARRANTY........................................................................................................................ 18

3
PACKAGE CONTENT
M
E
B
C
H
F
G
O
J
K
L
P
S
NT
Q
I
E
R

4
PACKAGE CONTENT
PART# DESCRIPTION QTY CODE
B Fixed panel 1 99SG10058-WM
C Door panel 1 99SGD0044-WM
E Wall track 2 99STR0035-WM
F Wall jamb 1 99STR0036-WM
G Corner track 1 99SRU0148-WM
H Door handle 1 99SHA1035-WM
I Gasket 1 99SRU0149-WM
J Glass panel’s vertical seal strip 2 99SRU0150-WM
K Magnetic strip 1 99SRU0151-WM
L Magnetic strip cover 1 99SGC0043-WM
M Top metal track 1 99SGS0030-WM
N Bottom metal track 1 99SGS0031-WM
O Door top roller 2 99SWE0026-WM
P Fixed panel’s top seal strip 1 99SRU0157-WM
QSliding door guide (with its rubber tting) 1 99SGC0044-WM
R Fixed panel’s bottom seal strip 1 99SRU0158-WM
S Door top aluminum strip 1 99STR1051-WM
T Door bottom seal strip 1 99SRU0159-WM
U Hardware content 1 99SHW0117-WM

5
HARDWARE CONTENT
TOOLS REQUIRED
Pencil Screwdriver Level
Measuring Tape Silicone Rubber mallet Cutter
Safety glasses
Allen key
2.5 & 4 & 5mm
Ratchet
5mm Bit socket
Drill with ceramic tile bit
ø1/8” (3mm) & ø1/4” (6mm)
AA
Wall Anchor
ø6x30mm
6+2
Ladder
GG
Bolt
M4x30mm
2x
CC
Screw
ST4x20mm
8+2
EE
Cap
12x
DD
Screw
ST4x12mm
8+2
FF
Fitting
12x
BB
Screw
ST4x30mm
6+2
Wood stick

6
Please read and understand this entire manual before attempting to assemble, operate
or install the product.
WARNING
• Distributor is not responsible for any damage to the unit or personal property caused
by improper installation. If you disregard instructional warnings, you will void your
warranty and possibly deal with water damage.
CAUTION
• Carefully remove product from packaging and keep packaging until installation is
complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation,
please contact customer service at the number provided in this guide.
• Install the shower on a oor that is level and able to accommodate the weight of the
unit and an occupant.
• Please, consult local building codes and compliance standards prior to installation
and ensure conformity.
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time 60min.
Handle the tempered glass with caution! Improperly handling the glass can
cause it to break suddenly in small pieces (never in pointed fragments).
Dot NOT put glass panels on hard surfaces, always work on clean and soft
surface (e.g. towel). Shattering may occur otherwise!
HEAVY PRODUCT! You will need at least two people to install this
unit properly.

7
• This instruction is drawn up for an opening from right to left (see illustration B).
• For an installation from left to right (see illustration A), use the same instructions, but switch around the
panels: mirror effect.
SHOWER REVERSIBILITY
WALL TO WALL MEASURES
A B
Install the shower head on the door’s side! This will reduce the risk of leaking.
• Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit
your space to install the shower panels.
• Make sure to have a tile to tile distance (D) between 1478mm (58 3/16 in) min. and 1493mm (58 3/4 in)
max. (see image).
Make sure to have a distance (D) from the left side tile
to the right side tile:
D Min: 1478mm (58 3/16 in)
D Max: 1493mm (58 3/4 in)

8
BASE INSTALLATION GUIDELINES (OPTIONAL)
1 2
4
Tile wall
Studs
Drywall
Silicone
5
Shower Base
3
Shower Base
Cement
Floor
Wood shim
Flange
Stud
Flange
Drywall
Silicone

9
1. Take the rubber tting out of the sliding door guide (Q).
2. Place the sliding door guide (Q) on the bottom metal track (N) and mark the positions of the 2 holes.
3. Drill pilot holes with a ø1/8” (3mm) drill bit.
4. Secure sliding door guide (Q) with screws (CC).
5. Put the rubber tting back to the sliding door guide (Q).
SHOWER FRAME INSTALLATION
CC
Q
1
34
2
5
26 3/4”
[679]
26 3/4”
[679]
ø1/8”
3 mm
Q
N
N
Q
Q

10
1. Insert the xed panel’s top seal strip (P) and the door top aluminum strip (S) into the top metal track (M).
2. Insert the xed panel’s bottom seal strip (R) at the base of the xed panel (B).
3. Place the xed panel (B) into the sliding door guide (Q).
4-5. Place the top metal track (M) and the wall jamb (F) on the xed panel (B).
SHOWER FRAME INSTALLATION
M
12
3 4
5
S
P
B
Q
F
M
B
R
M
B

11
1-2. Install the wall jamb (F) on the top metal track (M) and the bottom metal track (N) using the screws (DD).
3-4. Install the corner track (G) on the top metal track (M) and the bottom metal track (N) using the screws
(DD).
5. Place the gasket (I) between the xed panel (B) and the wall jamb (F). Use a wood stick for help as it will t
tightly.
SHOWER FRAME INSTALLATION
DD
1
5
3
2
4
DD
DD DD
M
F
G
M
G
N
B
F
I
Helpful Hint
Use a ladder
to facilitate the
installation.
N
F

12
1-2. Place the 2 wall tracks (E) on the xed panel (B) and the corner track (G).
3. Place the whole shower frame onto the base.
SHOWER FRAME INSTALLATION
E
12
B
E
G
3

13
1-2. Ensure the base and shower frame are leveled. Mark the position of the holes of the wall tracks (E) on the
wall.
3. Remove the shower frame.
4-5. Drill pilot holes in the marked locations with a ø1/4” (6mm) drill bit. Insert the wall anchors (AA) using a
rubber mallet until the wall anchors are ush with the wall.
6. Replace the whole shower frame onto the base.
WALL TRACK INSTALLATION
ø1/4”
6 mm
B
E
E
3 4
1
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
AA
56
2

14
1-2. Secure the 2 wall tracks (E) using screws (BB), ttings (FF) and caps (EE).
3-4. Drill the 2 wall tracks (E) with a ø1/8” (3mm) drill bit in both 3 places.
5-6. Secure the 2 wall tracks (E) using screws (CC), ttings (FF) and caps (EE).
WALL TRACK INSTALLATION
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
1
E
EE
FF
BB EE
FF BB
2
E
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
FF
E
3
5
4
6
B
E
EE
CC EE
FF
CC
ø1/8”
3 mm
ø1/8”
3 mm
B

15
1. Uninstall the T prole from the door top rollers (O).
2. Install the 2 top rollers (O) on the door panel (C). Use a ratchet to strongly tighten the bolts.
3. Insert the door bottom seal strip (T) onto the door panel (C).
4. Place the door (C) on the top metal track (M).
5-6. Place the glass panel’s vertical seal strip (J) on the door (C) and the xed panel (B).
DOOR INSTALLATION
O
1 2
3
5 6
O
C
C
TC
M
4
C
B
J
J

16
1. Find out which side of the magnetic strip (K) attracts the door’s magnet.
2. Insert the magnetic strip (K) into the corner track (G). Make sure to insert it with the attracting side facing the
door’s magnet. Then install the magnetic strip cover (L) to the corner track (G).
3. Adjust the angle of the door (C) by turning the middle screw of the door top rollers (O) to ensure the ttness
between the door (C) and the corner track (G).
4. Install the auxiliary screws (GG) onto the T prole.
5. Install the T proles back to the door top rollers (O).
6. Remove the screws (GG).
DOOR INSTALLATION
1
C
GG
5
2
4
6
GG
K
C
KL
C
C
G
Helpful Hint
Use the auxiliary
screws will be
easier to install the
T prole
O
3
G
O

17
1. Install the door handle (H).
2. Ensure that the door closes and opens smoothly, and that there is a tight connection between the side glass
panels and the frame as well as the support bar.
Apply a clear silicone water sealant around the outside perimeter of any xed shower components (horizontally
between bottom of xed side glass panel and the base, as well as vertically between the wall, glass frames,
and any side glass panel).
Allow 24 hours for silicone to dry.
Improper application of silicone sealant may cause your shower to leak.
HANDLE INSTALLATION & SEALING
2
H
1

18
CARE AND MAINTENANCE
For the daily maintenance, use a wet cloth and a soft liquid cleaner.
Never use abrasive cleaners containing some acetone, chlorine or strong bleach, scrapers, metallic brushes,
nor other objects or the products which can graze or tarnish surfaces.
Use a ratchet to strongly tighten any bolts used to support the xed glass panels or doors panel (support bolts
can withstand up to 250 lbf*in of torque).
Check these bolts every 4 months and re-tighten them if necessary.
LIMITED 5 YEARS WARRANTY
This warranty extends only to the original owner lend-user for personal household use only. For commercial
uses, additional limitations may apply.
Distributor warrants your satisfaction with each shower. Should any shower not meet your satisfaction due to
a visual defect, simply return it to your retailer with the original packaging, PRIOR TO INSTALLATION, for a
replacement.
Distributor warrants shower doors to be free from defects in workmanship and materials under normal use and
service for a period of ve (5) years.
Distributor warrants acrylic surface against blistering or cracking and chipping resulting from defect in the
acrylic surface material when used under normal conditions and service for a period of ve (5) years from
purchase date.
Distributor further warrants the structure of the acrylic shell against loss of water through berglass laminate of
the acrylic body as a result of defect in materials and workmanship for a period of ve (5) years from purchase
date.
Distributor warrants, shower hardware (handles, hinges, rubber support clips, metal support bars and wall
tracks) to be free from defects in workmanship and materials under normal use and service for a period of one
(1) year.
Distributor will, at its election, repair, replace, or make appropriate adjustment where distributor optional
inspection discloses any such defects occurring in normal usage within the warrantee periods.
Please note distributor is not responsible for installation or removal costs.
Modication of any shower enclosure components may void the warranty. This warranty does not cover any
claim arising from abuse, misuse, negligence, accident, improper installation or operations on the part of the
purchaser. This warranty is void if the distributor product is subject to alterations, or if repairs where done to the
shower unit.
This warranty does not extend to any plumbing or components installed by dealers, installers or by any party
other than distributor.
Implied warranties, including that of merchantability or tness for a particular purpose, are expressly limited in
duration to the duration of this warranty.
Distributor disclaims any liability for special, incidental or consequential damages.

19
Mesures: pouces [millimètres]
2015-09-04 2800 Etienne Lenoir, Laval
Québec H7R 0A3 Canada
Date de l’achat: _______________________ Numéroderéférenceduproduit:______________________
Questions, problèmes ou pièces manquantes?
Avant de retourner le produit à votre détaillant, contactez notre service à la clientèle au
1-866-839-2888, du lundi au vendredi de 9h00 à 17h00 HNE.
ELLIS 60
Ouverture
24 5/8”
[625]
17 3/4”
[450]
78 3/4”
[2000]
Ouverture
60”
[1524]
78 3/4”
[2000]
Marques CSA
28 1/16”
[713] 29 13/16”
[758]
Mur-à-Mur
58 3/16”
[1478]

20
CONTENU DE L’EMBALLAGE ......................................................................................................................... 22
QUINCAILLERIE FOURNIE .............................................................................................................................. 23
OUTILS REQUIS ............................................................................................................................................... 23
INFORMATION SUR LA SÉCURITÉ ................................................................................................................. 24
PRÉPARATION ................................................................................................................................................. 24
CETTE DOUCHE EST RÉVERSIBLE ............................................................................................................... 25
GUIDE D’INSTALLATION DE LA BASE (OPTIONNEL) ................................................................................... 26
INSTALLATION DU CADRE DE LA DOUCHE..................................................................................................27
INSTALLATION DU RAIL MURAL................................................................................................................... 31
INSTALLATION DE LA PORTE......................................................................................................................... 33
INSTALLATION DE LA POIGNÉE ET SCELLAGE ........................................................................................... 35
TRAITEMENT ET ENTRETIEN ......................................................................................................................... 36
GARANTIE LIMITÉE DE 5 ANS ........................................................................................................................ 36
TABLE DES MATIÈRES
Table of contents
Languages:
Other OVE Other manuals
Popular Other manuals by other brands

Oase
Oase StreamMax Classic 2000 operating instructions

dataTaker
dataTaker DT80 user manual

Champion Power Equipment
Champion Power Equipment 14001 Owner's manual & operating instructions

sammi
sammi SM-R400 user manual

PERCo
PERCo WHD-16 Installation and operation manual

enSkate
enSkate Fiboard instruction manual