Ovela Mirrored Full Length Jewellery & Accessories... User manual

Ovela Mirrored Full Length Jewellery & Accessories Cabinet
OVMIRJCW TA
Quick Start Guide
Assistance may be required for assembly of this product.
•The parts below are included in the product.
•The smaller assembly parts will be located in the bottom drawer of the cabinet.
A
1 piece
Jewellery cabinet with mirror
B
2 pieces
Stand
C
1 piece
Connecting rod
D
1 piece
Connecting panel
6 sets
Screw set
F
2 sets
Round-headed screw set
G
1 piece
Allen key
H
1 piece
Door key
I
2 pieces
Angle lock pin

Assembly Instructions
Step One
1. Connect panel D to
stand B with screws .
2. Connect rod C to stand
B with screws .
3. Fix pins I securely to
both sides of stand B.
Step Two
1. Keep the cabinet door
closed and locked while
assembling.
2. Connect cabinet A and
stand B with screws F.
3. For easier assembly, lay
cabinet A down on a
large flat surface.
Step Three
Adjust the mirror to a desired
angle, then use pins I to fix
securely.
Maintenance and Care
1. Avoid exposure to direct sunlight and heat sources.
2. Keep cabinet door closed when not in use.
3. Use mild furniture cleaners to clean the cabinet.
4. Open the cabinet door gently to avoid spilling of contents or damage to the door.
5. The new cabinet may have a paint odour upon first unpacking. This will disappear in a short
time.