Ovela OVMALLOWSBA User manual

MALLOW SIDEBOARD
OVMALLOWSBA

Important Information:
•Please read the entire manual carefully before starting to assemble and/or using this
product. Follow the manual thoroughly and keep it for further reference.
•Two people are required for this assembly.
•Electric drill may be required to create holes in wall for
secure mounting.
•Do not use an electric drill for tightening screws on the
cabinet during assembly.
SAFETY & WARNINGS
WARNING: The screw supplied together with the anti-toppling bracket
is to be used only for fixing the anti-topple bracket to the furniture. Some
products must be fixed directly to the wall (without bracket) and for
these no screws are included. In addition to this, you will need to choose
a screw or fitting which is suitable for securing the bracket to the kind of
walls you have. If you are unsure about what type of screw to use
contact your local hardware store.

1
1650 x 400 x 25mm
x1
12
147 x 16 x 16mm
x1
2
560 x 385 x 15mm
x1
13
568 x 543 x 4mm
x1
3
560 x 385 x 15mm
x1
14
568 x 533 x 4mm
x2
4
560 x 385 x 15mm
x1
15
573 x 547 x 15mm
x1
5
560 x 385 x 15mm
x1
16
573 x 547 x 15mm
x1
6
1650 x 385 x 15mm
x1
17
547 x 190 x 15mm
x2
7
525 x 368 x 15mm
x1
18
340 x 118 x 12mm
x2
8
535 x 368 x 15mm
x1
19
475 x 118 x 12mm
x2
9
525 x 368 x 15mm
x1
20
340 x 118 x 12mm
x2
10
185 x 85 x 50mm
x4
21
483 x 338 x 4mm
x2
11
1555 x 30 x 15mm
x1
COMPONENTS

Hardware:
A340mm (x4)
BM6x12mm (x16)
CM5x40mm (x4)
DM6x45mm (x12)
EΦ15x12mm (x12)
FΦ8x30mm
(x20)
GΦ5x38mm (x8) HM6x27mm (x8) IΦ12x10mm (x8) JΦ4x35mm (x8)
K15x13x10mm
(x12)
LΦ3.5x20mm
(x12)
MΦ35/FK0mm
(x2)
NΦ35/FK9mm (x2) OM4x14mm (x16)
P212x26x17mm
(x4)
QΦ4x18mm (x8) RΦ3.5x12mm (x16) SΦ5/ Φ15mm (x8) TM6x50mm (x1)
U(x1)
V(x2)
WM4x12mm (x4)
XΦ10mm (x6)
Y4mm (x1)
Z3mm (x1)
AA Φ21mm (x16)
Additional tools required:
Phillips head screwdriver Flat head screwdriver Mallet

Step 1:
FΦ8x30mm (x20)
ASSEMBLY

Step 2:
A340mm (x4)

Step 3:
RΦ3.5x12mm (x8)

Step 4:
DM6x45mm (x4)
Step 5:
EΦ15x12mm (x4)

Step 6:
DM6x45mm (x8)
Step 7:
EΦ15x12mm (x8)

Step 8:
Step 9:
GΦ5x38mm (x8)
Z3mm (x1)

Step 10:
TM6x50mm (x1)
Y4mm (x1)
Step 11:
CM5x40mm (x4)
U(x1)

Step 12:
BM6x12mm (x16)
Y4mm (x1)

Step 13:
K15x13x10mm (x12)
LΦ3.5x20mm (x12)

Step 14:
V(x2)
WM4x12mm (x4)
XΦ10mm (x4)

Step 15:
SΦ5/ Φ5mm (x8)
AA Φ21mm (x8)

Step 16:

Step 17:
M
Φ35/FK0mm
(x2)
N
Φ35/FK9mm
(x2)
O
M4x14mm
(x8)
P
212x26x17mm
(x2)
Q
Φ4x18mm
(x4)