Ovela JEPSON CONVERTIBLE User manual

JEPSON CONVERTIBLE
LOUNGE CHAIR AND BED
OVSFBJPBK1A, OVSFBJPDB1A, OVSFBJPLG1A

FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT
COVERED BY YOUR WARRANTY.
1. Read Instructions carefully. Ensure no parts are missing before beginning.
2. Lay out all of the components on a soft surface.
3. Carefully identify each component, especially those that are similar. The most
common mistake is getting things back to front.
4. Separate and identify each component from the hardware pack and rest each one
in its proper location before fastening.
5. DO NOT fully tighten screws (leave slightly loose). When the item is fully assembled
tighten the screws - but do not over-tighten.
SAFETY & WARNINGS

ASofa Frame (x1) BPillow (x1) CSolid Wood Legs (x4)
D4pcs Leg Screws (x4) EAllen Key (x1) FWashers (x4)
COMPONENTS

Step 1
Using the Allen key, screws and washers, assemble all the wooden legs.
ASSEMBLY
Cut towards
to front side
Metal
Plate

Step 2
To use it as a sofa bed please open the bottom zippers and pull out the 4x metal legs. Close
the zippers.
ZIPPER CUT
STAND UP
Hidden metal
legs x4
ZIPPER CUT

Step 3
To use it as a sofa seater, roll up the sofa end and pull up the sofa head like the diagram
below
Complete!
Fold up
Fold up

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com