Ovela OVCAMCDLGWA User manual

CAMERAN CONSOLE / DESK
180CM
OVCAMCDLGWA, OVCAMCDLGNA

Ensure to read all instructions and warnings in this user guide prior to assembly. Retain this
user guide for future reference.
•Ensure no parts are missing.
•Lay out all the components on a soft surface.
•Carefully identify each component, especially those that are similar. The most
common mistake is getting things back to front.
•Do not fully tighten screws (leave slightly loose). When the item is fully assembled,
tighten the screws but do not overtighten.
•Separate and identify each component from the hardware pack and rest each one in
its proper location before fastening.
•Do not, for any reason, use a power tool to assemble this product. The
use of power tools may apply excess force on the fixtures, causing
damage.
SAFETY & WARNINGS

Parts list
No.
Dimensions (mm) Qty
01 675 x 356 x 50 2
02 1810 x 360 x 50 1
COMPONENTS

Hardware
A(x4) BØ17 x 8 x 2mm (x4) CM8 x 14 x 5mm (x4) DM8 x 70mm (x4)
E(x1) F(x4) G10 x 50mm (x4)

Step 1: Insert D onto part 2 as shown below. This creates the top assembly.
DM8x70mm (x4)
ASSEMBLY

Step 2: Insert G onto both parts labelled 1. This will create two support assemblies.
G10x50mm (x4)
x2

Step 3: Insert the support assemblies onto the top assembly. This will result in D attached in
step 1 to protrude out of the two holes on each support assembly.
Inside one hole of a support assembly, place A,B and C over D. Secure C with the E wrench,
then cover the hole with F.
Repeat this process with the remaining three holes.
A(x4) BΦ17 x 8 x 2mm (x4) CM8 x 14 x 5mm (x4) E(x1) F(x4)

Assembly complete.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com