overstock 194S8259/DG-LRPWH User manual

ITEM NO: 194S8259/DG-3PWH#
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT WITH POWER
HARDWARE LIST
NO. DRAWING QTY DESCRIPTION
1
2
3
1 PC
1 PC PLUG WITH
WIRE
ADAPTOR
Assembly Instruction
POWER LSF RECLINING CHAIR
WITH ADJUSTABLE POWER
HEADREST
ITEM NO: 194S8259/DG-LRPWH
B1 PC
BACK REST
HEADREST WIRE
Y-CABLE
1 PC

QP-AI-P022-069-1
STEP#2
Place the cap screw from the end through the plastic leg, insert the gasket onto the leg. Rotate clockwise to tighten
the leg.
3 3
3
3
3
4
5
STEP#3
LPW R
STEP#4
Completed.
STEP#5
6
Adaptor
7
Plug
Wire
LPW
USB Port
5V/1A
Press
(Recline)
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely. Connecting the wire from back rest to seat for power headrest.
B
Back Rest
Installation
A
STEP#2
Unpack adaptor set
located at the motor
3
1
2
WIRE
RRPWH
WIRE
LRPWH
STEP#3
Velcro
LRPWH
LRPWH CN
AC/
ARPW
AC/
ARPW CR RRPWH
STEP#4

CARE INSTRUCTION FOR FABRIC:
In order to maintain the original appearance of your fabric furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage fabric.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Wipe fabric with professional cleanser.
Disconnect the eletrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
Control Switch
Press
(Close / Open)
Press
(Close / Open)
USB Port
5V/1A
USB Port
5V/1A
STEP#5
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE
Headrest
Chair

NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT
Assembly Instruction
ARMLESS CHAIR
ITEM NO: 194S8259/DG-AC
B1 PC
BACK REST

STEP#2
Place the cap screw from the end through the plastic leg, insert the gasket onto the leg. Rotate clockwise to tighten
the leg.
3 3
3
3
3
4
5
STEP#3
LPW R
STEP#4
Completed.
STEP#5
6
Adaptor
7
Plug
Wire
LPW
USB Port
5V/1A
Press
(Recline)
STEP#3
Velcro
AC
LRPWH CN
AC/
ARPW
AC/
ARPW CR RRPWH
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely.
STEP#2
A
B
Back Rest
Installation
CARE INSTRUCTION FOR FABRIC:
In order to maintain the original appearance of your fabric furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage fabric.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Wipe fabric with professional cleanser.

NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT WITH POWER
Assembly Instruction
POWER RSF RECLINING CHAIR
WITH ADJUSTABLE POWER
HEADREST
ITEM NO: 194S8259/DG-RRPWH
B1 PC
BACK REST
HEADREST WIRE

STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely. Connecting the wire from back rest to seat for power headrest.
B
Back Rest
Installation
A
STEP#2
STEP#3
Velcro
RRPWH
LRPWH CN
AC/
ARPW
AC/
ARPW CR RRPWH
STEP#4
Control Switch
Press
(Close / Open)
Press
(Close / Open)
USB Port
5V/1A
USB Port
5V/1A
Unpack adaptor set
packed with LRPWH
Headrest
Chair

CARE INSTRUCTION FOR FABRIC:
In order to maintain the original appearance of your fabric furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage fabric.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Wipe fabric with professional cleanser.
Disconnect the eletrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE