overstock 194S9509MGY/DG-LRPWH User manual

Assembly Instruction
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT WITH POWER
HARDWARE LIST
NO. DRAWING QTY DESCRIPTION
1
2
3
QP-AI-P022-100-1
1 PC
1 PC PLUG WITH
WIRE
ADAPTOR
ITEM NO.: 194S9509MGY/DG-LRPWH
LSF POWER RECLINING CHAIR W/
POWER HEADREST,USB PORT
B1 PC
BACK REST
HEADREST WIRE
Y-CABLE
1 PC
1/3
ITEM NO.: 194S9509MGY/DG#6LRRRPWH

QP-AI-P022-100-1
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely. Connecting the wire from back rest to seat for power headrest.
B
Back Rest
Installation
A
STEP#2
STEP#3
STEP#4
3
1
2
Unpack adaptor set
located at the motor
Velcro
LRPWH
LRPWH CN
AC/
AR
AC/
AR CR 5R
LRPWH CN
AC/
AR
AC/
AR CR RRPWH
2/3

CARE INSTRUCTION FOR POLYESTER:
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Disconnect the electrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
Control Switch
Press
(Close / Open)
Press
(Close / Open)
USB Port
5V/1A
USB Port
5V/1A
STEP#5
QP-AI-P022-100-1
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE
Headrest
Chair
3/3

COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
CONSOLE
QP-AI-P022-107-1
Assembly Instruction
ITEM NO.: 194S9509MGY/DG-CN
CONSOLE WITH STAINLESS
STEEL CUPHOLDERS
B1 PC
BACK REST
1/2

QP-AI-P022-107-1
STEP#3
Velcro
CN
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely.
STEP#2
A
B
Back Rest
Installation
CARE INSTRUCTION FOR POLYESTER
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
5L CN
AC/
AR
AC/
AR CR RRPWH
LRPWH CN
AC/
AR
AC/
AR CR RRPWH
LRPWH CN
AC/
AR
AC/
AR CR 5R
2/2

NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT
QP-AI-P022-105-1
Assembly Instruction
ITEM NO.: 194S9509MGY/DG-AC
ARMLESS CHAIR
B1 PC
BACK REST
1/2

QP-AI-P022-105-1
STEP#3
Velcro
AC
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely.
STEP#2
A
B
Back Rest
Installation
CARE INSTRUCTION FOR POLYESTER:
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
5L CN
AC/
AR
AC/
AR CR RRPWH
LRPWH CN
AC/
AR
AC/
AR CR RRPWH
LRPWH CN
AC/
AR
AC/
AR CR 5R
2/2

Assembly Instruction
ITEM NO.: 194S9509MGY/DG-CR
CORNER SEAT
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
HARDWARE LIST
NO. DRAWING QTY DESCRIPTION
1
QP-AI-P022-106A-4
1 PC EXTENSION
CORD
CORNER
SEAT
1 PC
1 PC
B
C
LSF CORNER
BACK REST
RSF CORNER
BACK REST
1/3
2
3
1 PC
1 PC
WRENCH

QP-AI-P022-106A-4
STEP#1
STEP#2
A
STEP#3
B
Velcro
STEP#4
2/3
3
2

CARE INSTRUCTION FOR POLYESTER:
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
STEP#6
QP-AI-P022-106A-4
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE
5L CN
AC/
ARWH
AC/
ARWH CR RRPWH
LRPWH CN
AC/
ARWH
AC/
ARWH CR RRPWH
LRPWH CN
AC/
ARWH
AC/
ARWH CR 5R
STEP#5
REMARK:
*Adaptor set is packed in 5L for
sectional combination with
RRPWH.
Plug With
Wire
Adaptor
REMARK:
*Adaptor set and Y cable are
packed in LRPWH for sectional
combination with RRPWH.
Plug With
Wire Y-cable
Adaptor
3/3
1

Assembly Instruction
ITEM NO.: 194S9509MGY/DG-ARWH
ARMLESS POWER RECLINING CHAIR
W/POWER HEADREST
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT WITH POWER
HEADREST WIRE
QP-AI-P022-138-1
B1 PC
BACK REST
1/3
HARDWARE LIST
NO. DRAWING QTY DESCRIPTION
1
2
1 PC
1 PC PLUG WITH
WIRE
ADAPTOR

QP-AI-P022-138-1
STEP#3
ARWH
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely. Connecting the wire from back rest to seat for power headrest.
STEP#2
A
B
Back Rest
Installation
Velcro
2/3
5L CN
AC/
ARWH
AC/
ARWH CR RRPWH
LRPWH CN
AC/
ARWH
AC/
ARWH CR RRPWH
LRPWH CN
AC/
ARWH
AC/
ARWH CR 5R
Unpack adaptor set
located at the motor
1
2
WIRE
ARWH
STEP#4

CARE INSTRUCTION FOR POLYESTER:
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Disconnect the eletrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
STEP#5
QP-AI-P022-138-1
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE
Control Switch
Press
(Close / Open)
Press
(Close / Open)
USB Port
5V/1A
USB Port
5V/1A
Headrest
Chair
3/3

Assembly Instruction
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking
the wood.
COMPONENT LIST (CHAIR)
NO. DRAWING QTY DESCRIPTION
A1 PC
SEAT WITH POWER
QP-AI-P022-101-2
ITEM NO.: 194S9509MGY/DG-RRPWH
RSF POWER RECLINING CHAIR W/
POWER HEADREST,USB PORT
B1 PC
BACK REST
HEADREST WIRE
1/3
NOTE:
*ADAPTOR SET PACKED IN -5L & LRPWH

QP-AI-P022-101-2
STEP#1
Align the female brackets at the back rest onto the male brackets at the seat, insert back rest to the seat then push to
the end and make sure it is fixed in position securely. Connecting the wire from back rest to seat for power headrest.
STEP#2
STEP#3
Velcro
Unpack adaptor set
packed with LRPWH
RRPWH
5L CN
AC/
AR
AC/
AR CR RRPWH
LRPWH CN
AC/
AR
AC/
AR CR RRPWH
BBack Rest
Installation
A
2/3
3
1
2
STEP#4

CARE INSTRUCTION FOR POLYESTER:
In order to maintain the original appearance of your polyester furniture, please follow below simple care
procedure :
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air
conditioning outlets will fade/damage polyester.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
Disconnect the electrical plug from the wall outlet before cleaning, moving, servicing or when not in use for an
extended period of time.
Plug directly into a wall outlet. Do not use an extension cord or adaptor.
Check the condition of the power transfomers, electrical cords, plugs and connectors monthly. Keeps the power
adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor,
electrical cord, plug or connector.
Before moving the product, please disconnect the electrical plug from the wall outlet and secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord
under carpet or in location where it could become worn.
Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
STEP#5
QP-AI-P022-101-2
PLEASE KEEP ASSEMBLY INSTRUCTION FOR FUTURE REFERENCE
Control Switch
Press
(Close / Open)
Press
(Close / Open)
USB Port
5V/1A
USB Port
5V/1A
Headrest
Chair
3/3