overstock CB850R -035 User manual

4pcs
Chest
Description
A
BBun Foot
No. Q'tySketch
PARTS LIST
1pc
CTipping Restraint
A
B
4123
STEP 1: Take out the Bun foot from drawer
Leg's Box
HARDWARE LIST
4pcs
4pcs
4pcs
1
2
3
4
No. Q'ty
Description
Allen Bolt 5/16''*88mm
Spring Washer 5/16''
Flat Washer 5/16''x18mm
Allen Key 4mm (L=100)
Sketch
ASSEMBLY INSTRUCTIONS
ITEM NO: CB850R -035
CHEST
Caution: Please read instructions thoroughly before unpacking assembly parts.Sharp,exposed staple tips can
cause injury,therefore,for your protection,please remove any exposed staple used in packing.
1. We recommend that you should assemble this product with the assistance of another person;this will make
assembly easier,and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come lose inside the carton
during shipment.
3. Please do not over tighten screws or bolts until the assembly is complete.
4. Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
STEP 2:
1pc
1pc
PAGE: 1 OF 2
MADE IN VIET NAM

WALL
TOP
C
STEP 3: Attach the tipping restraint.The tipping restraint must be attached at back of Chest,
above and on the right or left side.
Completed
WALL
PAGE: 2 OF 2
MADE IN VIET NAM