overstock LOVE SEAT User manual

Assembly Instructions
LOVESEAT
Caution: You must read this before you proceed
Noble House Home Furnishings LLC Page 1 OF 9
Caution: This Loveseat is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever moving or lifting the Loveseat and to prevent any possible
damage to it, two adults are needed to execute this action.
Please look in the Leg Panel for hardware packs

Noble House Home Furnishings LLC Page 2 OF 9
Label Picture Description QTY
B 1
Parts List
1A Right Leg Panel
Left Leg Panel
C 1
Backrest Panel
D Seat Panel 1
F
Seat Cushion
1
1
E
Backrest Cushion
First Support Bar
Second Support Bar
H
G
2
1
Third Support bar
I
1

Noble House Home Furnishings LLC Page 3 OF 9
Before Beginning Assembly:
Asembly Preparation
Read instructions, cover to cover-
Do not assemble on flooring or carpet-
Assemble on a clean non-marring surface (packing foam)-
Save all packaging until finished-
Have 2 adults on hand for assembly-
Label Picture Description QTY
1
2
Hardware
4 Allen Wrench 1
Bolt (M6x35 mm) 5
Bolt (M6x45 mm) 9
Bolt (M6x60 mm) 5
3
5Screw (M4x35mm)
(Use with Screwdriver) 7
6 Screwdriver
(Not provided)
x5
x9
x5
x1
x7

OVERVIEW
Before Beginning Assembly:
Left Leg
Panel ( B)
Seat Cushion(I)
Right Leg
Panel (A)
Backrest
Cushion (H)
First Support Bar (E)
FRONT FACING
Asembly Preparation
Noble House Home Furnishings LLC Page 4 OF 9
Backrest
Panel (C)
Second Support
Bar(F)
Third Support Bar (G)
This Loveseat has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Loveseat parts, the above picture is
to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.

Noble House Home Furnishings LLC Page 5 OF 9
Unpack and place all parts on a clean, non-marring surface.
Step 1
D G
6
5
Attach Third Support Bar (G) to the Seat Panel (D) using Screw (⑤) and a
Screwdriver (⑥) as shown above
Step 2

Noble House Home Furnishings LLC Page 6 OF 9
Step 4
With the help of your adult partner, position the Seat Panel (D) to the
assembled part in step 2, then secure the Seat Panel (D) to the Right Leg
Panel (A) using Bolts (①) and the Allen Wrench (④) as shown above
Do not fully tighten the Bolts.
Step 3
With the help of your adult partner, put the tenon of the First Support Bar (E) and
Second Support Bar (F) into the mortise of the Right Leg Panel (A) then secure
the First Support Bar (E) and Second Support Bar (F) to the Right Leg Panel (A)
using 4 Bolts (②) and the Allen Wrench (④) as shown above
Do not fully tighten the Bolts.
Note: The Wooden Blocks on the First Support Bar (E) and the Second
Support Bar (F) shall be opposite of each other
A
D
F
E
A
2
4
F
E
1
4

Step 6
Noble House Home Furnishings LLC Page 7 OF 9
5
6
With the help of your adult partner,secure theThird Support Bar (G) to the First
Support Bar (E) and Second Support Bar (F) using Screws (⑤) and
Screwdriver (⑥) as shown above
Step 5
With the help of your adult partner, position the Left Leg Panel (B) to the assembled part
in step 3 then:
5.1. Attach the tenons of the First Support Bar (E) and Second Support Bar (F) into the
mortise of the Left Leg Panel (B) using Bolts (②) and the Allen Wrench (④) as shown
above
5.2. Attach the Seat Panel (D) to the Left Leg Panel (B) using Bolts (①) and the Allen
Wrench (④) as shown above
Do not fully tighten the Bolts.
B
A
F
E
D
G
4
2
5.1
1
4
5.2
B
A
F
D
G
E

Noble House Home Furnishings LLC Page 8 OF 9
With assistance from your adult partner, stand the Loveseat up
Exert pressure floorwards, onto the Loveseat with both your hands.
This pressure will help the Legs and Loveseat reach full alignment
status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten Bolts and Screws in a
sequential manner, until evenly secured.
When tightening Bolts and Screws tighten sequentially.
Do not tighten any Bolt or Screw fully and then move on towards
the next one.
If there are still wobbles after tightening, loosen Bolts and Screws
and execute the same above process.
Step 7
With the help of your adult partner, stand the assembled part in step 6, then
attach the Backrest Panel (C) to the Right Leg Panel (A) and Left Leg
Panel (B) of the assembled part in step 6 using Bolts (③) and the Allen
Wrench (④) as shown above
Do not fully tighten Bolts.
Step 6
A
B
C
3
4

Noble House Home Furnishings LLC Page 8 OF 9
.
Put Seat Cushion (I) then put Back Cushion (H) onto the
Loveseat. Tie the magic tape straps of Seat Cushion (I) to the
slat of Seat Panel (D) as shown above
Tilt the Loveseat with the assistance from your partner.
Adjust the Levellers until the Loveseat is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and
hold the Loveseat while you are working.
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Step 8
Step 8
Adjust height for balance Adjust low for balance
Adjust Pre-installed Levellers
height for balance
I
I
H

Noble House Home Furnishings LLC Page 9 OF 9
Care & Maintenance