overstock METAL FULL BED User manual

ASSEMBLY INSTRUCTION
1
This page lists all the contents included in the box.
Please take the time to identify the hardware as well
as the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
308BF(3A) METAL FULL BED
Headboard
1 pc
Footboard
1 pc
Side rail
2 pcs 2 pcs
Side rail
Slat
2 pcs 2 pcs
Support leg
6 pcs
Extension leg
2 pcs
Slat
Allen wrench
1 pc
Bolt
1/4" X 15 mm
Bolt
1/4" X 18 mm
Bolt
1/4" X 44 mm
18 pcs 8 pcs 6 pcs
28 pcs
Flat washer Connecting plate
2 pcs

2
C
D
M
J
I
Assemble the extension leg(H) to the headboad (A) with 4 pcs bolt (J) and 2 pcs connecting
plate (N) fastened using allen wrench (I).
Assemble side rail (C) and side rail (D) together by using bolt (J) and flat washer (M) as shown
as drawing and tighten with the allen wrench (I).
C
A
I
J
H
X 4 pcs
I
J X 6 pcs
M X 6 pcs
D
X 2
GG
L
IE
L
F
I
M
M
M
L
I
E,F G
X 2
X 2
Assemble the slat (E) and slat (F) to the support leg (G) with 1 pc bolt (L) 1 pc flat washer (M)
for each support leg (G) then fastened using allen wrench (I).
I
L X 6 pcs
M X 6 pcs
I
J
N
H
A
N X 2 pcs

3
I
K X 8 pcs
M X 8 pcs
Assemble the subassembly side rail (C,D) to the extension leg (H) with 4 pcs bolt (K) and 4
pcs flat washer (M); Assemble the the subassembly side rail (C,D) to the footboard (B) with 4
pcs bolt (K) and 4 pcs flat washer (M), then fastened using allen wrench (I).
A
H
B
H,B
C,D
M K I
M K
Assemble the slat (E) and slat (F) to the side rail (C) and side rail (D) with 1 pc bolt (J) and 1
flat washer (M) for each end of slat (E) and slat (F) then fastened using allen wrench (I).
A
H
B
E
E
F
F
I
J
M
C,D
E,F
I
J X 8 pcs
M X 8 pcs
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
C,D
C,D
C,D

ASSEMBLY INSTRUCTION
1
This page lists all the contents included in the box.
Please take the time to identify the hardware as well
as the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
308BQ(3A) METAL QUEEN BED
Headboard
1 pc
Footboard
1 pc
Side rail
2 pcs 2 pcs
Side rail
Slat
2 pcs 2 pcs
Support leg
6 pcs
Extension leg
2 pcs
Slat
Allen wrench
1 pc
Bolt
1/4" X 15 mm
Bolt
1/4" X 18 mm
Bolt
1/4" X 44 mm
18 pcs 8 pcs 6 pcs
28 pcs
Flat washer Connecting plate
2 pcs

2
C
D
M
J
I
Assemble side rail (C) and side rail (D) together by using bolt (J) and flat washer (M) as shown
as drawing and tighten with the allen wrench (I).
C
A
H
I
J X 6 pcs
M X 6 pcs
D
X 2
GG
L
IE
L
F
I
M
M
M
L
I
E,F G
X 2
X 2
Assemble the slat (E) and slat (F) to the support leg (G) with 1 pc bolt (L) 1 pc flat washer (M)
for each support leg (G) then fastened using allen wrench (I).
I
L X 6 pcs
M X 6 pcs
I
J
N
H
A
Assemble the extension leg(H) to the headboad (A) with 4 pcs bolt (J) and 2 pcs connecting
plate (N) fastened using allen wrench (I).
I
J X 4 pcs
N X 2 pcs

3
I
K X 8 pcs
M X 8 pcs
Assemble the subassembly side rail (C,D) to the extension leg (H) with 4 pcs bolt (K) and 4
pcs flat washer (M); Assemble the the subassembly side rail (C,D) to the footboard (B) with 4
pcs bolt (K) and 4 pcs flat washer (M), then fastened using allen wrench (I).
A
H
B
H,B
C,D
M K I
M K
Assemble the slat (E) and slat (F) to the side rail (C) and side rail (D) with 1 pc bolt (J) and 1
flat washer (M) for each end of slat (E) and slat (F) then fastened using allen wrench (I).
A
H
B
E
E
F
F
I
J
M
C,D
E,F
I
J X 8 pcs
M X 8 pcs
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
C,D
C,D
C,D

ASSEMBLY INSTRUCTION
1
This page lists all the contents included in the box.
Please take the time to identify the hardware as well
as the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
308BT(3A) METAL TWIN BED
Headboard
1 pc
Footboard
1 pc
Side rail
2 pcs 2 pcs
Side rail
Slat
2 pcs 2 pcs
Support leg
6 pcs
Extension leg
2 pcs
Slat
Allen wrench
1 pc
Bolt
1/4" X 15 mm
Bolt
1/4" X 18 mm
Bolt
1/4" X 44 mm
18 pcs 8 pcs 6 pcs
28 pcs
Flat washer Connecting plate
2 pcs

2
C
D
M
J
I
Assemble side rail (C) and side rail (D) together by using bolt (J) and flat washer (M) as shown
as drawing and tighten with the allen wrench (I).
C
A
H
I
J X 6 pcs
M X 6 pcs
D
X 2
GG
L
IE
L
F
I
M
M
M
L
I
E,F G
X 2
X 2
Assemble the slat (E) and slat (F) to the support leg (G) with 1 pc bolt (L) 1 pc flat washer (M)
for each support leg (G) then fastened using allen wrench (I).
I
L X 6 pcs
M X 6 pcs
I
J
N
H
A
Assemble the extension leg(H) to the headboad (A) with 4 pcs bolt (J) and 2 pcs connecting
plate (N) fastened using allen wrench (I).
I
J X 4 pcs
N X 2 pcs

3
I
K X 8 pcs
M X 8 pcs
A
H
B
H,B
C,D
M K I
M K
Assemble the slat (E) and slat (F) to the side rail (C) and side rail (D) with 1 pc bolt (J) and 1
flat washer (M) for each end of slat (E) and slat (F) then fastened using allen wrench (I).
I
J
M
C,D
E,F
I
J X 8 pcs
M X 8 pcs
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
A
H
B
C,D
E
E
F
F
Assemble the subassembly side rail (C,D) to the extension leg (H) with 4 pcs bolt (K) and 4
pcs flat washer (M); Assemble the the subassembly side rail (C,D) to the footboard (B) with 4
pcs bolt (K) and 4 pcs flat washer (M), then fastened using allen wrench (I).
C,D
C,D