overstock WF283288 User manual

ASSEMBLY INSTRUCTIONS
1
This set is included 2 boxes if don't receive full 2 boxes please contact our customer service team.
WF283288/WF283289
BUNK BED 2 - WITH SLIDER + 2 SHELF

Up bed (bunk bed and tribed included)
Bed type Length
Twin Standard 74” – 75”
Width
38 ½’’ 6’’ max
2. Replacement parts, including additional guardrails, maybe obtained from any of
our (GIGACLOUD TECHNOLOGY (USA). INC) dealers.
3. Follow the information on the warnings appearing on the upper bunk bed end
structure and on the carton. Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to
help prevent the likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the upper bunk.
7. Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the upper bunk.
10. Do not use substitute part. Contact the manufacture or dealer for replacement
part.
11. Use of a night light may provide added safety precaution for a child using the upper
bunk.
12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will
be placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD – Never attach or hang items to any part of the
bunk bed that are not designed for use with the bed; for example, but not limited to,
hook, belts and jump ropes.
15. Keep these instruction for future reference.
1.This bed is designed for use only mattress (es) meeting the following specifications
on the Loft Bed:
16.Prohibit more than one person on upper bunk.
17.We recommend assembling your bunk bed on the shipping carton to protect your
floor or carpet.
18.Be certain all staples are out of the box before beginning assembly on the shipping
carton
2
Thickness

Detail View
3

Detail View
4

Part List: WF283288
1
Front left leg - 1pc
Front horizontal - 2pcs
L bed-Front side rail - 1pc L bed-Front horizontal - 2pcs
Stairs bar - 4pcs
Back left leg - 1pc Front right leg - 1pc
Back horizontal (lower) - 1pc
5
Front side rail - 1pc
Back vertical - 2pcs
Back right leg - 1pc
L bed-Front left leg - 1pc
Left slide vertical - 1pc
Right slide vertical - 1pc Silde support (upper) - 4pcs Silde support (lower) - 1pc
Slide panel - 1pc
23
4 7 8
9 10 11
12 14 15
16 17 18
19 20 21
23 25 26
27 28 29
30
Back side rail - 1pc
Back horizontal (upper) - 2pcs
L bed-Back left leg - 1pc
L bed-Back side rail - 1pc
L bed-Back horizontal (lower) - 1pc L bed-Back horizontal (upper) - 2pcs L bed-Front vertical - 1pc
Stairs vertical middle - 1pc

Horizontal bar (lower) - 3pcs Horizontal bar (upper) - 6pcs
Slat - 16pcs Stairs vertical left - 1pc
6
Stairs vertical right - 1pc
Side skirting shelves- 4pcs
5 6
13 22 24
31
32 3433
Bookcase top - 2pcs Bookcase shelf - 4pcsBookcase support bar - 4pcs
Part List: WF283289

7
Hardware List
A
Ø10*30mm
Wood dowel (71pcs)
GH
E
B
F
C
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
PLEASE BE CAREFUL DO NOT DAMAGE THE HOLE
POSITION WHEN YOU USE POWER TOOLS !
D
I
Horizontal-Hole bolt (23pcs)
Ø1/4"
Hex-Head screw (4pcs)
Hex-Head bolt (24pcs)
Ø1/4"*40mm
Hex-Head bolt (23pcs)
Ø1/4"*80mm
Hex-Head screw (6pcs)
Screw (6pcs)
#4*15mm
Allen key (1pc)
K4mm
Screw (44pcs)
#4*30mm
Ø6*30mm
Ø6*80mm
JK L
Hex-Head screw (34pcs)
Ø6*50mm
Hex-Head screw (18pcs)
Ø6*100mm
Hook (2pcs)
Part List: WF283289
Felt stickers (2pcs)
M

STEP 1:
STEP 2:
8
H
12PCS
A
12PCS
A
H
14PCS
C
14PCS10PCS
A D
A
C
D
C
AD

STEP 3:
STEP 4:
9
E
3PCS
2PCS
C
2PCS2PCS
AD
C
DA
E

STEP 5:
STEP 6:
10
2PCS
F
A
4PCS
2PCS
G
A
F
A
4PCS
F
F
G