overstock MF288036 User manual

PAGE 1 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
SKU: MF288036
Weight Limits
250 lbs
Weight Limits
350 lbs

PAGE 2 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
1. This bed is designed for use only mattress (es) meeting the following specifications on the upper
bunk, and lower bunk:
Upper bunk (bunk bed and tribed included)
Bed type Length Width Thickness
Twin Standard 74” - 75” 38 12'' 6'' max
Lower bunk
Bed type Length Width Thickness
Twin Standard 74” - 75” 38 12'' 8''
2. Replacement parts, including additional guardrails, maybe obtained from any of our (GIGACLOUD
TECHNOLOGY(USA) INC. 18961 ARENTH AVENUE, CITY OF INDUSTRY, CA, 91748) dealers.
3. Follow the information on the warnings appearing on the upper bunk bed end structure and on the
carton.
Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the upper bunk.
7. Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the upper bunk.
10. Do not use substitute part. Contact the manufacture or dealer for replacement part.
11. Use of a night light may provide added safety precaution for a child using the upper bunk.
12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
15. Keep these instruction for future reference.
16. Prohibit more than one person on upper bunk
17. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.
18. Be certain all staples are out of the box before beginning assembly on the shipping carton.
SAFETY WARNING

PAGE 3 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
1. At the beginning :
Tighten all hardware.
Check metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting the
requirements of 16 CFR 1303.
Check all wood members for deterioration and splinters. Sand down splinters and replace
deteriorating wood members.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary.
2. Twice a month
Tighten all hardware.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary.
3. Owners shall be responsible for maintaining the legibility of the warning labels.
4. Disposal Instructions-
There shall be instructions advising the owner to disassemble and dispose of the playground
equipment in such a way that no unreasonable hazards will exist at the time the playground
equipment is discarded.
5. The instructions shall also include the information found in Section 4 of the United States
Consumer Product Safety Commission's (USCPSC) Outdoor Home Playground Safety Handbook or
specific surfacing guidelines for the product consistent with the USCPSC Handbook. A copy of this
section may be found in Appendix X2.
6. Observing the following statements and warnings reduces the likelihood of serious or fatal injury.
7. Specifying the number and weight of occupants that may safely use the equipment singly or
simultaneously,
8. Recommending on-site adult supervision for children of all ages,
9. Warning the owner to instruct children not to use the equipment in a manner other than intended,
10. Warning the owner to instruct children not to get off equipment while it is in motion,
11. Warning the owner not to allow children to wear inappropriate items, such as but not limited to,
loose fitting clothing, hood and neck drawstrings, scarves, cord-connected items, capes and
ponchos. These items can cause death by strangulation.
12. Warning the owner to instruct children not to climb when the equipment is wet.
13. Warning the owner to instruct children not to attach items to the playground equipment that are
not specifically designed for use with the equipment, such as, but not limited to, jump ropes,
clothesline, pet leashes, cables and chain as they may cause a strangulation hazard
14. Warning the owner to instruct children to remove their bike or other sports helmet before
playing on the playground equipment.
15. Warning the owner to dress children with well-fitting and full foot enclosing footwear.
Examples of inappropriate footwear are clogs, flip flops, and sandals.
16. Place the equipment on level ground, not less than 6 ft (1.8 m) from any structure or obstruction
such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires
17. Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or
any other hard surface. A fall onto a hard surface can result in serious injury or death to the
equipment user
18. To prevent serious injury, cautionary statements shall be included which warn that children must
not use the equipment until properly installed.

PAGE 4 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
28
27
29
14
13
19 22
21
22
16
27
23
23
26
26
25
24*2
17
17
15
18
1
3
4
2
5
6
7
8
8
10
9
11 *4
12 *38

BUNK-BED
ASSEMBLY INSTRUCTIONS
1
PART LIST
5
1 PC
10
1 PC
15 16 17
2 PCS1 PC
PAGE 5 OF 13
2
1 PC
3 4
6
78
911 12
1 PC 4 PCS 38 PCS
13 14
1 PC
19
1 PC 1 PC 1 PC
20
1 PC
1 PC 1 PC
1 PC 1 PC
1 PC 2 PCS
1 PC
18
1 PC
21

PAGE 6 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
1/4"*40
2 SET
K
22 23 24
2 PCS2 PCS 2 PCS
25
1 PC
26 27
28 29
2 PCS
1/4"*55
34 PCS
A
4x60
2PCS
1/4"*40
21 PCS
B
1/4"*30
15 PCS
40*40x10
4 PCS
25*25x10
4 PCS
1/4"*15
12 PCS
C E F GH
1/4"*25
9 PCS
D
1 PC 1 PC
1 PC
PART LIST

PAGE 7 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
4x60
2PCS
D
1/4"*25
4 PCS
H
A
1/4"*55
16 PCS
A
A
A
A
A
A
A
A
A
A
A
A
A
D
D
D
D
40*40x10
4 PCS
F
STEP 1 STEP 2
12
34
910
15
16
17 17
18

PAGE 8 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
4x60
2PCS
H
E
1/4"*15
8 PCS
STEP 3
STEP 4
8
8
12
12
12
12
12 12 12 12 12 11 12 12 12 12 12 12
11
12
12
12
12
12
12
12 12 12 12 12 11 12 12 12 12 12 12
11
12
12
12
12
12
12
13
14

PAGE 9 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
A
A
A
A
A
A
A
A
4x60
2PCS
D
1/4"*25
3 PCS
H
C
1/4"*30
2 PCS
A
1/4"*55
16 PCS
E
1/4"*15
4 PCS
C
C
STEP 5
1
2
34
5
6
7
8
8
13
14
17
17
STEP 3
STEP 4
STEP 1
STEP 2

PAGE 10 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
4x60
2PCS
C
1/4"*30
1 PCS
H
B
1/4"*40
13 PCS
A
1/4"*55
2 PCS
STEP 6
5
14
19
20
21
22
22
23 23
1

PAGE 11 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
4x60
2PCS
C
1/4"*30
12 PCS
H
B
1/4"*40
2 PCS
STEP 7
15
19
22
22
24
25
26
26
25
24
24
26
26

1/4"*25
2 PCS
D
PAGE 12 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
4x60
2PCS
H
B
1/4"*40
6 PCS
25*25x10
4 PCS
G
STEP 8
27
28
29
27

PAGE 13 OF 13
BUNK-BED
ASSEMBLY INSTRUCTIONS
STEP 9
K
4x60
2PCS
H
Attached to the wall for
the bed to be firmer
when used if necessary
K
K
1/4"*40
2 SET