Oxford Garden ISLAY User manual

15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
ISLAY BAR CHAIR
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: Hardware pack may contain extra hardware.
NOTE: A hammer (not provided) will be needed for the assembly of this chair.
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to remove the sawdust
that may cause some staining.
6m x 35 mm Wood Screw
Quantity: 2
6m x 60 mm Wood Screw
Quantity: 2
A
B
8mm Dowel
Quantity: 12
Allen Wrench
Quantity: 2
C
D
Right Leg Assembly
Quantity: 1
Left Leg Assembly
Quantity: 1
2
Back
Quantity: 1
Seat
Quantity: 1
34
Front Leg Stretcher
Quantity: 1
Back Leg Stretcher
Quantity: 1
6
5

Ver. 06.30.20
STEP 2
Next, insert the left leg assembly into the rest of the
assembeled parts as shown
INSTRUCTIONS
STEP 1
On a clean flat surface, e.g., cardboard, lay right leg
assembly on its side, mortise holes facing up. Place
the tenons of the seat assembly into the mortises of the
right leg assembly. Repeat for front leg stretcher and
back leg stretcher .
Ver. 2020.01.28
STEP 3
With a hammer, drive 12 dowels into designated
pre drilled holes as shown.
NOTE: Insert the tapered end of the dowels first.
STEP 5
Lastly, secure the back by inserting 2 short 35 mm bolts
into the top predrilled holes and 2 long 65 mm bolts as
shown by using the provided allen wrench.
STEP 4
Next, secure the back assembly into place.
C

4
5
6

4
5
6
4
4
C
C
C
C
3
3
A
B
AA
B
B