Oxford Garden SIENA OTTOMAN - SOTT User manual

15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
SIENA OTTOMAN - SOTT
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well
to remove the sawdust that may cause some staining.
NOTE: A hammer (not provided) will be needed for the assembly of this ottoman.
Foot Rest
Quantity: 1
Leg Assembly
Quantity: 2
Dowels
Quantity: 8
A

Ver. 06.30.20
INSTRUCTIONS
STEP 1
On a clean flat surface, lay the leg assembly2 on its side
mortise holes facing up. Line up the foot rest , and insert
into the leg assembly.
STEP 2
Line up and place leg assembly onto those parts already
assembled.
Ver. 2019.8.10
2
A
STEP 3
With a hammer, drive 8 total dowels into the predrilled
holes on the front and rear of the leg assemblies . Insert
the tapered end of the dowels first. NOTE: The dowels
should be easily driven in flush. If there is strong resistance,
do not force the dowel. Sand to smooth off areas around
the dowel pins. Your ottoman is now ready to enjoy!
1
1
2
1
1
A